BenQ Mx763/mx764 Digital Projector User Manual

We l c o m e
MX763/MX764
Digital Projector
User Manual 

Table of contents 2
Ta b l e  o f  c o n t e n t s
Important safety 
instructions ......................... 3
Introduction........................ 7
Projector features .................................. 7
Shipping contents .................................. 8
Projector exterior view .......................... 9
Controls and functions ....................... 10
Positioning your projector14
Choosing a location............................. 14
Obtaining a preferred projected image 
size...

Important safety instructions 3
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information 
technology equipment. However, to ensure safe use of this product, it is important that you 
follow the instructions mentioned in this manual and marked on the product. 
Safety Instructions
1.Please read this manual before you 
operate your projector. Save it for 
future reference. 
2.Do not look straight at the projector 
lens during operation. The...

Important safety instructions 4
  
Safety Instructions (Continued)
7. The lamp becomes extremely hot 
during operation. Allow the projector 
to cool for approximately 45 minutes 
prior to removing the lamp assembly 
for replacement. 
8. Do not operate lamps beyond the 
rated lamp life. Excessive operation of 
lamps beyond the rated life could 
cause them to break on rare occasions. 
9. Never replace the lamp assembly or 
any electronic components unless the 
projector is unplugged. 10. Do not place this...

Important safety instructions 5
    
Safety Instructions (Continued)
13. Do not place this projector in any of the 
following environments.
- Space that is poorly ventilated or 
confined. Allow at least 50 cm clearance 
from walls and free flow of air around 
the projector. 
- Locations where temperatures may 
become excessively high, such as the 
inside of a car with all windows rolled 
up.
- Locations where excessive humidity, 
dust, or cigarette smoke may 
contaminate optical components, 
shorten the...

Important safety instructions 6
Safety Instructions (Continued)
17. Do not step on the projector or place 
any objects upon it. Besides probable 
physical damage to the projector, doing 
so may result in accidents and possible 
injury.
18. Do not place liquids near or on the 
projector. Liquids spilled into the 
projector may cause it to fail. If the 
projector does become wet, disconnect 
it from the power supplys power outlet 
and call BenQ to have the projector 
serviced.
19. This product is capable...

Introduction 7
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use.
The projector offers the following features.
•  Network Settings allowing management of projector status from a computer using a web 
browser
•  Microphone jack to output the sound through the projector speaker
•  USB MINI-B jack to display computer signal through a USB cable
•  USB TYPE-A jack to present images stored...

Introduction 8
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these items 
are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those 
illustrated.
*The warranty card is only supplied in some specific regions. Please consult your dealer for 
detailed information.
Optional accessories
Projector Power cord VGA cable
Quick start guide User manual CD Warranty...

Introduction 9
Projector exterior view
1. External control panel
(See Controls and functions on page 
10 for details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Lens cover
5. Focus ring and Zoom ring
6. Vent (cool air intake)
7. Front IR remote sensor
8. Projection lens
9. AC power jack
10. Kensington anti-theft lock slot
11. Rear adjuster foot
12. Ceiling mount holes
13. Front adjuster foot
14. RJ45 LAN input jack
15. USB Mini-B port
16. RS232 control port
17. USB Type-A ports
18. HDMI-input port...

Introduction 10
Controls and functions
Projector9. TEMPerature warning light
Lights up red if the projectors 
temperature becomes too high.
10. LAMP indicator light
Indicates the status of the lamp. Lights up 
or flashes when the lamp has developed a 
problem.
11. AUTO
Automatically determines the best picture 
timings for the displayed image.
12. Keystone/Arrow keys ( / Up,  /
Down)
Manually corrects distorted images 
resulting from an angled projection.
13. Right/
Increases the projector volume.
When...