BenQ Mx661 Users Manual
Have a look at the manual BenQ Mx661 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operation 71 4. SYSTEM SETUP: Basic Presentation TimerTimer Period 1~240 minutes Timer DisplayAlways/3 min/2 min/1 min/Never Timer PositionTop-Left/Bottom-Left/Top-Right/ Bottom-Right Timer Counting DirectionCount Down/Count Up Sound Reminder On/Off On/OffYe s/No Language Projector InstallationFront Table/Rear Table/Rear Ceiling/Front Ceiling Menu SettingsMenu display Time5 secs/10 secs/20 secs/30 secs/ Always Menu PositionCenter/Top-Left/Top-Right/ Bottom-Right/Bottom-Left Reminder messageOn/Off Operation SettingsDirect Power On On/Off Signal Power On On/Off Auto Power OffDisable/3 mins/10 mins/15 mins/20 mins/25 mins/30 mins Quick Cooling On/Off Instant Restart On/Off Blank TimerDisable/5 mins/10 mins/15 mins/ 20 mins/25 mins/30 mins Sleep TimerDisable/30 mins/1 hr/2 hrs/3 hrs/ 4 hrs/8 hrs/12 hrs Fan SpeedNormal/High Panel Key Lock On/Off Ye s /No Background ColorBenQ/Black/Blue/Purple Splash ScreenBenQ/Black/Blue Downloaded From projector-manual.com BenQ Manuals
Operation 72 5. SYSTEM SETUP: Advanced High Altitude ModeOn/OffYe s /No Audio SettingsMute On/Off Volume Microphone Volume Power on/off Ring ToneOn/Off Lamp SettingsLamp Mode Normal/Economic/SmartEco Reset Lamp Timer Reset/Cancel Equivalent Lamp Hour Security SettingsChange Password Change Security Power on lock Baud Rate2400/4800/9600/14400/19200/ 38400/57600/115200 Test Pattern On/Off Closed CaptionClosed Caption Enable On/Off Caption VersionCC1/CC2/CC3/CC4 Standby Settings Network On/Off Microphone On/Off Monitor Out On/Off Audio Pass ThroughOff/Computer 1/Computer 2/ Video, Svideo/HDMI Network SettingsWired LANStatus DHCP IP Address Subnet Mask Default Gateway DNS Server Apply Wireless LANStatus SSID IP Address Connection Mode Projection Log in code On/Off AMX Device Discovery On/Off Mac Address Reset All Settings Reset/Cancel 6. INFORMA TION Current System Status•Source •Picture Mode •Resolution •Lamp Mode •3D Format • Color System • Equivalent Lamp Hour •Firmware Version Downloaded From projector-manual.com BenQ Manuals
Operation 73 Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Downloaded From projector-manual.com BenQ Manuals
Operation 74 Description of each menu • The default values listed in this manual, especially on pages 74-83, are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION DESCRIPTION Wall ColorCorrects the projected picture’s color when the projection surface is not white. See Using Wall Color on page 36 for details. Aspect RatioThere are four options to set the images aspect ratio depending on your input signal source. See Selecting the aspect ratio on page 34 for details. KeystoneCorrects any keystoning of the image. See Correcting keystone on page 28 for details. Position Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC signal (analog RGB) is selected. Phase Adjusts the clock phase to reduce image distortion. This function is only available when a PC signal (analog RGB) is selected. H. Size Adjusts the horizontal width of the image. This function is only available when a PC signal (analog RGB) is selected. Digital ZoomMagnifies or reduces the projected image. See Magnifying and searching for details on page 33 for details. 1. DISPLAY menu Downloaded From projector-manual.com BenQ Manuals
Operation 75 FUNCTION DESCRIPTION 3D This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view the 3D images. 3D Mode The default setting is Auto and the projector automatically chooses an appropriate 3D format when detecting 3D contents. If the projector cannot recognize the 3D format, press / to choose a 3D mode. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Teaching Te m p l a t eProvides some templates as teaching aids. Teachers can use them for teaching. See Use teaching template on page 44 for details. 1. DISPLAY menu Downloaded From projector-manual.com BenQ Manuals
Operation 76 FUNCTION DESCRIPTION Picture ModePre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See Selecting a picture mode on page 35 for details. Reference ModeSelects a picture mode that best suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See Setting the User 1/User 2 mode on page 35 for details. BrightnessAdjusts the brightness of the image. See Adjusting Brightness on page 36 for details. ContrastAdjusts the degree of difference between dark and light in the image. SeeAdjusting Contrast on page 36 for details. Color Adjusts the color saturation level -- the amount of each color in a video image. See Adjusting Color on page 36 for details. This function is only available when a Video or S-Video signal is selected. Tint Adjusts the red and green color tones of the image. See Adjusting Tint on page 36 for details. This function is only available when a Video or S-Video signal is selected and the system format is NTSC. Sharpness Adjusts the image to make it look sharper or softer. See Adjusting Sharpness on page 36 for details. This function is only available when a Video or S-Video signal is selected. 2. PICTURE menu Downloaded From projector-manual.com BenQ Manuals
Operation 77 FUNCTION DESCRIPTION Brilliant ColorSee Adjusting Brilliant Color on page 36 for details. Color TemperatureSee Selecting a Color Temperature on page 36 for details. Color Temperature Fine TuningSee Setting a preferred color temperature on page 37 for details. 3D Color ManagementSee 3D Color Management on page 37 for details. Reset Picture Setting See Resetting current or all picture modes on page 38 for details. When Picture Mode is under Dynamic, choosing Current will only reset the Dynamic to default value, however, choosing All will reset all the Picture Mode settings to default values. Quick Auto SearchSee Switching input signal on page 32 for details. Color Space ConversionSee Changing Color Space on page 33 for details. 2. PICTURE menu 3. SOURCE menu Downloaded From projector-manual.com BenQ Manuals
Operation 78 FUNCTION DESCRIPTION Presentation TimerReminds the presenter to finish the presentation within a certain time frame. See Setting the presentation timer on page 39 for details. LanguageSets the language for the On-Screen Display (OSD) menus. See Using the menus on page 29 for details. Projector InstallationThe projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See Choosing a location on page 15 for details. Menu Settings Menu display Time Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu Position Sets the On-Screen Display (OSD) menu position. Reminder message Sets whether to display the reminder message. 4. SYSTEM SETUP: Basic menu Downloaded From projector-manual.com BenQ Manuals
Operation 79 FUNCTION DESCRIPTION Operation Settings Direct Power On Selecting On enables the function. See Starting up the projector on page 25 for details. Signal Power On Selecting On the projector will turn on automatically when VGA signal is detected. Selecting Off the projector has to be turnned on manually (by keypad or remote). See Starting up the projector on page 25 for details. Auto Power Off Allows the projector to turn off automatically if no input signal is detected after a set period of time. See Setting Auto Power Off on page 85 for details. Quick Cooling Selecting On enables the function and the projector cooling time will be shortened to a few seconds. If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans. Instant Restart When instant restart is on, users can restart projector immediately within 90 secs after turning off projector. Blank Timer Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See Hiding the image on page 41 for details. Sleep Timer Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Fan Speed This function is only available when a dust filter is installed. Selecting High enables the function. Panel Key LockDisables or enables all panel key functions except Power on the projector and keys on the remote control. Background ColorAllows you to select which background color will display when no signal is input into the projector. Four options are available: BenQ logo, Black, Blue, or Purple. Splash ScreenAllows you to select which logo screen will display during projector start-up. Three options are available: BenQ logo, Black screen, or Blue screen. 4. SYSTEM SETUP: Basic menu Downloaded From projector-manual.com BenQ Manuals
Operation 80 FUNCTION DESCRIPTION High Altitude ModeA mode for operation in high altitude areas. See Operating in a high altitude environment on page 42 for details. Audio Settings Allows you to enter the audio setting menu. Mute Sets the mute function. Volume Adjusts the audio volume level. Microphone Volume Adjusts the microphone sound level. Power on/off Ring Tone Sets the power on/off ring tone. Lamp Settings Lamp Mode See Setting Lamp Mode eco function as Economic or SmartEco mode on page 85 for details. Reset Lamp Timer See Resetting the lamp timer on page 90 for details. Equivalent Lamp Hour See Getting to know the lamp hour on page 85 for details on how the total lamp hour is calculated. Security Settings Change Password You will be asked to enter the current password before changing to a new one. Change Security Power on lock See Utilizing the password function on page 30 for details. Baud Rate Selects a baud rate that is identical with your computer’s so that you can connect the projector using a suitable RS-232 cable and update or download the projector’s firmware. This function is intended for qualified service personnel. Test Pattern Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image is free from distortion. See Use build-in test pattern on page 27 for details. 5. SYSTEM SETUP: Advanced menu Downloaded From projector-manual.com BenQ Manuals