BenQ Mw870ust Users Manual

Operation
51 i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE on page 67 and Remote control on page 13 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
iii. You can select a preferred OSD language.
The tools page allows you to manage the projector, configure the LAN control settings and 
secure access of remote network operation on this...

Operation 52i. You can name the projector, keep track of its location and the person in charge 
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the Send button and the data will be saved in the projector.
v. P re s s  exit to go back to the Crestron remote network operation page.
The info page displays...

Operation
53 The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance.
Downloaded From projector-manual.com BenQ Manuals 

Operation 54The Wired LAN page allows you to adjust the Wired LAN settings.
The Wireless LAN page allows you to adjust the Wirless LAN settings.
Max. length for SSID string is 16 bytes. Please use a different SSID when more than two 
projectors are connecting through wireless LAN.
Downloaded From projector-manual.com BenQ Manuals 

Operation
55 The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works.
Downloaded From projector-manual.com BenQ Manuals 

Operation 56
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network display and transfers the desktop contents to the network display via local 
network connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1. Connect the projector with the RJ45 cable, and make sure your laptop or computer 
also link to the LAN. See Configuring the Wired LAN Settings on page 46 and 
Configuring the...

Operation
57 ii. Projectors linked in the LAN will be found. Then select the projector you want 
to link.
iii. Click “Connect”. Then you should be able to see the image on projector.
iv. You can click to disconnect all connected projectors..
The Special Feature page allows you to have some advanced functions to manage the 
display image on your projector.
i. Full Screen: whole image display on the projector. Selectable: a square will pop-
up then you can move and drag the area you want to show the...

Operation 58ii. You can select to stop/start displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4locations can be chosen (1-4) or 2 places (L 
and R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change th elocation anytime you want, even 
back to full screen or blank out.
The Basic and Advanced Settings pages...

Operation
59 vii. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
viii. You can adjust the capture rate. The network bandwidth may also affect the 
performance.
ix. You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
x....

Operation 60
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System. 
To enable the function:
1. After your computer is connected to the projector, enter the address of the 
projector in the address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next...