BenQ Mw870ust Users Manual

							Operation
51 i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE on page 67 and Remote control on page 13 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
iii. You can select a preferred OSD language.
The tools page allows you to manage the projector, configure the LAN control settings and 
secure access of remote network operation on this projector.
i
i
i
ii
iii
iii
iiiv
v
i
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 52i. You can name the projector, keep track of its location and the person in charge 
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the Send button and the data will be saved in the projector.
v. P re s s  exit to go back to the Crestron remote network operation page.
The info page displays the information and status of this projector.
i. Press exit to go back to the Crestron remote network operation page.
The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages 
once the password is entered. The default password is “0000”. If you want to change the 
password, please enter Basic page.
i
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
53 The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance.
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 54The Wired LAN page allows you to adjust the Wired LAN settings.
The Wireless LAN page allows you to adjust the Wirless LAN settings.
Max. length for SSID string is 16 bytes. Please use a different SSID when more than two 
projectors are connecting through wireless LAN.
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
55 The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works.
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 56
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network display and transfers the desktop contents to the network display via local 
network connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1. Connect the projector with the RJ45 cable, and make sure your laptop or computer 
also link to the LAN. See Configuring the Wired LAN Settings on page 46 and 
Configuring the Wireless LAN Settings on page 46 for details.
2. Find the IP address and enter the address of the projector in the address bar of your 
browser. See Controlling the projector remotely through a web browser on page 
47 for details. 
3. Download the Q Presenter, unzip it and complete program installation.
4. Once installed, double click the Q Presenter icon. The Q Presenter page appears.
5. Click the Search icon.
The Search page allows you to search and connect a network display.
i. You can key in the IP address (see Controlling the projector remotely through a 
web browser on page 47 for details.) or just click “Search”.
i
ii
iii
iv
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
57 ii. Projectors linked in the LAN will be found. Then select the projector you want 
to link.
iii. Click “Connect”. Then you should be able to see the image on projector.
iv. You can click to disconnect all connected projectors..
The Special Feature page allows you to have some advanced functions to manage the 
display image on your projector.
i. Full Screen: whole image display on the projector. Selectable: a square will pop-
up then you can move and drag the area you want to show the audience.
i
ii
iii
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 58ii. You can select to stop/start displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4locations can be chosen (1-4) or 2 places (L 
and R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change th elocation anytime you want, even 
back to full screen or blank out.
The Basic and Advanced Settings pages allow you to configure the Q Presenter.
i. You can select whether to activate Remote Desktop function. If the Remote 
Desktop function is activated, you can change the Name and  Password. If it isn’t 
activated, the Name and Password will be gray out. 
ii. You can set the name and password of the connected computer. The Name must 
be eight capital letters from A-Z & 0-9. The Password must be 6 digits from 1 to 
4.
iii.  When you install the Q Presenter, the program will automatically identify the 
language of your computer’s operating system and install the same language as 
your operating system. If your language isn’t included, the system will keep 
English as the default setting.
iv. You can select whether to allow notification message popup.
v. Once you set to activate 1:N display, 1PC/NB can display up to 8 projectors at 
the same time.
vi. Once set, press Apply to save the changes.
i
v
ii
iii
iv
vi
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
59 vii. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
viii. You can adjust the capture rate. The network bandwidth may also affect the 
performance.
ix. You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
x. Once set, press Apply to save the changes.
xi. You can link to the BenQ remote network operation page on page 47.
ix
x
xi
vii
viii
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 60
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System. 
To enable the function:
1. After your computer is connected to the projector, enter the address of the 
projector in the address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next time someone connects to this projector, the Projector Network Display System 
page provides limited functions.
To disable the function:
1. Go to the Admin page of the Projector Network Display System.
2. Enter the current password.
3. Click OFF in the Web Control Lock row.
You can also use the OSD menu to toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Security Settings > Change 
Security Settings menu after opening the OSD menu system. Press MODE/
ENTER. The message “INPUT PASSWORD” appears. Enter the current password.
2. If the password is correct, the OSD menu returns to the Security Settings page. 
Press  to highlight Web Control Lock and press  /  to select On or Off.
Using the Projection Login Code
This function is designed to ensure network display through the correct projector. To 
toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Network Settings menu after 
opening the OSD menu system. Press MODE/ENTER.
2. Press  to highlight Projection Log In Code and press  /  to select On or 
Off.
When this function is on, the projector 
generates a random 4-digit code in the 
upper right corner when you switch the 
source to Network Display. You need to 
key in this 4-digit code in the Q 
Presenter when connecting to the 
projector.
Downloaded From projector-manual.com BenQ Manuals