BenQ Mw870ust Users Manual

							Operation
61
Presenting From a USB Reader
This fature displays a slide show of images stored on a USB flash drive connected to the 
projector. It can eliminate the need for a computer source.
Image File Types
USB Reader displays images files in JPEG, GIF, TIFF, PNG and BMP formats.
• A square box will display on the filename for unidentified characters.
• Thai filename is not supported.
• Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than 
WXGA (1280 x 800) only.
• If a folder consists of more than 200 photos, only the first 200 photos can be displayed. 
Preparation
To view your pictures as a slideshow, follow these steps:
1. Connect a USB flash drive to your computer and copy files from your computer to 
the USB flash drive.
2. Turn on your projector if needed.
3. Remove the USB flash drive from your computer and plug it into the USB TYPE-A 
jack of the projector.
4. The thumbnails display.
Controlling USB Reader
While viewing thumbnails:
i. Thumbnails
i
iiiiv
ii
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 62ii. Selected folder
iii. Supported file format
iv. Unsupported file format
During slideshow:
ToPress
open folder Enter
scroll through thumbnails four arrow keys
return to a previous page Auto
exit USB Reader Exit
change to a different page
/ 
go back to the first page of that folder Back
start slide show Slideshow when an image is highlighted.
adjust USB Reader settings Setting
ToPress
go to previous or next image
/ 
rotate the image by 90 degree clockwise/
counterclockwise/
(Rotation is temporary; the image returns to 
its original orientation when you go back to 
thumbnails)
return to a previous page Auto
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
63 Settings page:
i. You can adjust order settings.
ii. You can adjust Slideshow settings.
iii. Press OK to save the settings.
iv. Press Cancel to ignore the change. start/stop slideshow Enter
ii
iiiiv
i
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 64
Remote Desktop Control through Q Presenter
The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from 
projector site.
1. Setup the RDC login account (User name and Password ) in Q Presenter.
• Name: must be 8 English capital letters A~Z and number 0 ~9.
• Password: must be 6 digits and limit the range from 1~4.
• If there are lot of audience is watching the display while the user is entering the 
password, the number will be transferred to up, left, down, right in order from 1 
to 4 of remote control’s or projector’s keypads .
• If multiple same Q Presenter names are found, an error like “duplicate” is 
displayed in projector OSD.
2. Activate Remote Desktop Control Function in Q Presenter > Settings > Basic 
Settings.
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
65 3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network 
Settings menu. Press MODE/ENTER.
4. Highlight Remote Desktop and press MODE/
ENTER.
5. Enter the Account and Password the same as 
step 1.
6. Highlight Connect and press MODE/ENTER 
to connect the selected PC.
7. Connect USB keyboard or mouse to control the 
host PC’s desktop through the projector.
• Remote Desktop Control does not support PC Standby mode.
• Remote Desktop Control only supports LAN source so the projector source is fixed on 
LAN.
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 66
Po i n t D r aw ™ Pe n
The PointDraw™ pen works like a wireless mouse - but one that works in midair, not on 
your desktop. Just hold the pen in your hand, and point it at the projected image to point, 
click and drag. Please find latest compatible PointDraw™ pen user guide for more detail.
Shutting down the projector
1. Press Power on the projector. A 
confirmation message displays prompting you. 
If you dont respond in a few seconds, the 
message will disappear. If you use the remote 
control, press OFF to shut down the 
projector.
2. Press Power on the projector a second 
time. The POWER indicator light flashes 
orange, the projection lamp shuts down, and 
the fans will continue to run to cool down the 
projector. 
To protect the lamp, the projector will not respond to 
any commands during the cooling process.
3. Once the cooling process finishes, the 
POWER indicator light is a steady orange 
and fans stop.
4. Disconnect the power cord from the power putlet if the projector will not be used 
in an extended period of time.
• If the projector is not properly shut down, to protect the lamp, when you attempt to re-start 
the projector, the fans will run for a few minutes to cool down. Press Power again to start 
the projector after the fans stop and the POWER indicator light turns orange.
• Actual lamp lives may vary due to different environmental conditions and usage.
II
II
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
67
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Auto Keystone On/Off
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync On/Off
3D Sync Invert Disable/Invert
2. 
PICTURE
Picture ModeDynamic/Presentation/sRGB/Cinema/User 1/User 2
Reference Mode Dynamic/Presentation/sRGB/Cinema
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color On/Off
Color 
TemperatureT1/T2/T3/T4
3D Color 
ManagementPrimary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Save Settings
3. SOURCEQuick Auto Search On/Off
Color Space ConversionAuto/RGB/YUV
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 68
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer period1~240 minutes
Timer displayAlways/Last 1 Min/Last 2 Min/Last 
3 Min/Never
Timer positionTop-Left/Bottom-Left/Top-Right/
Bottom-Right
Timer counting 
directionCount Down/Count Up
Sound ReminderOn/Off
On/Off
Language
Projector PositionFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu display time5 sec/10 sec/15 sec/20 sec/25 sec/
30 sec
Menu positionCenter/Top-left/Top-right/Bottom-
right/Bottom-left
Reminder 
MessageOn/Off
Operation 
SettingsDirect Power On On/Off
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Blank TimerDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Sleep TimerDisable/30 min/1 hr/2 hr/3 hr/4 hr/
8 hr/12 hr
Remote 
ReceiverFront+Rear/Front/Rear
Panel Key LockOn/OffYe s / N o
Background 
ColorBenQ/Black/Blue/Purple
Splash Screen BenQ/Black/Blue
PointDraw™Single Pen/Dual 
Pen/Off
English/Français/Deutsch/Italiano/
Español/Русский/Äœ[/ŽD[0
_Î,0/Svenska/Nederlands/
Türkçe/Čeština/Português/ไทย/Polski/
Magyar/Hrvatski/Română/Norsk/
Dansk/Български/Suomi/Indonesia/
Ελληνικά
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation
69
5. 
SYSTEM 
SETUP: 
Advanced
Quick Cooling On/Off
High Altitude ModeOn/Off
Audio SettingsMuteOn/Off
Volume
Microphone 
Volume
Power on/off Ring 
ToneOn/Off
Lamp SettingsLamp Mode Normal/Economic
Reset lamp timer
Equivalent lamp hour
Security 
SettingsChange password
Change Security 
SettingsPower on Lock
Splash Screen On Lock
We b  C o n t r o l  L o c k
Baud Rate2400/4800/9600/14400/19200/ 
38400/57600/115200
Test PatternOn/Off
Closed CaptionClosed Caption 
EnableOn/Off
Caption Version CC1/CC2/CC3/CC4
Standby 
SettingsNetworkOn/Off
MicrophoneOn/Off
Monitor OutOn/Off
Network 
SettingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS
Apply
Wireless LANStatus
SSID
IP Address
Connection Mode
Remote DesktopAccount
Password
Connect
Projection Log in 
codeOn/Off
Reset All 
Settings
Downloaded From projector-manual.com BenQ Manuals 
						

							Operation 70Note that the menu items are available when the projector detects at least one valid signal. 
If there is no equipment connected to the projector or no signal detected, limited menu 
items are accessible.
6. 
INFORMA
TION
FAQ-Image and Installation
FAQ-Features and Service
Current System StatusSource
Picture Mode
Resolution
Color System
Equivalent Lamp Hour
Firmware Version
Downloaded From projector-manual.com BenQ Manuals