BenQ Mw870ust Users Manual

Operation
41
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you 
achieve better time management when giving presentations. Follow these steps to utilize 
this function:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press 
MODE/ENTER to display the Presentation Timer page.
2. Highlight Timer period and decide the timer period by pressing  / . The length 
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to...

Operation 42
Remote paging operations
Connect the projector to your PC or notebook 
with a USB cable prior to using the paging function. 
See Connecting a computer on page 22 for details.
You can operate your display software program (on 
a connected PC) which responds to page up/down 
commands (like Microsoft PowerPoint) by pressing 
PAGE UP/DOWN on the remote control. 
If remote paging function doesnt work, check if the 
USB connection is correctly made and the mouse 
driver on your computer is updated...

Operation
43
Utilizing FAQ function
The INFORMATION menu contains possible solutions to problems encountered by 
users regarding image quality, installation, special feature operation and service 
information.
To get the FAQ information:
1. Press   on the remote control or press 
MENU/EXIT to open the OSD menu and 
press  /  to highlight the 
INFORMATION menu.
2. Press  to highlight FAQ-Image and 
Installation or FAQ-Features and Service 
based on the information you want to know.
3. Press MODE/ENTER.
4....

Operation 44
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 
1500 m –3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient 
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode 
on under such a condition.
To activate the High Altitude Mode:
1. Press MENU/EXIT and then press  /  until the...

Operation
45 2. Highlight Power on/off Ring Tone and select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute 
or changing the sound level will not affect the Power on/off ring tone.
Adjusting the microphone’s sound level
To adjust the sound level, press MIC/VOL +/- on 
the remote control, or
1. Repeat steps 1-2 in Muting the sound section.
2. Highlight Microphone volumee and select a 
desired sound level.
Microphone sound will still function even though...

Operation 46
Controlling the projector through a LAN
environment
Network Settings allow you to manage the projector from a computer using a web 
browser when the computer and the projector are properly connected to the same local 
area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the LAN input jack of the projector and 
the other end to the RJ45 port.
2. Press MENU/EXIT and then press  /  until the SYSTEM SETUP: 
Advanced menu...

Operation
47 Infrastructure mode connection, you need to select the projector’s SSID which 
you want to connect. See Displaying image through Q Presenter on page 56 for 
details.
4. Use your computer’s wireless connection utility to connect the network.
If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the 
network.
Controlling the projector remotely through a web 
browser
Once you have configured the LAN settings, you can find the IP address for the projector 
in...

Operation 48
• The illustrations in web page control, Q Presenter and USB Reader sections are for the 
purpose of explanation and may differ from the actual design of your projector.
3. Click Download to save Q Presenter software on your computer.
You can also link to the web page control from Q Presenter > Settings > Advanced Setting > 
Control projector via web page on page 59. 
4. Execute the program installation.
5. Open Q Presenter, search and connect a network display. See Displaying image 
through...

Operation
49 i. These buttons function the same as the ones on the remote control. See 
Remote control on page 13 for details.
The Display Setting page allows you to operate the projector as if  you were using the 
OSD menus. These functions are some useful  menu settings.
The Picture Setting page allows you to manage the projector as if  you were using the 
PICTURE menu.
The Information page displays the information and status of this projector.
Downloaded From projector-manual.com BenQ Manuals 

Operation 50The Conference Control page allows you to control computer’s display status of all the 
computers linked to this projector.
The Crestron page is only available when you are  on a Wired LAN network. It also allows 
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9.
Downloaded From projector-manual.com BenQ Manuals