BenQ Mw712 Users Manual

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation31 • If the password is correct, the OSD menu returns to the Security Settings 
page with Off shown in the row of Power on Lock. You will not have to enter 
the password next time you turn on the projector.
• If the password is incorrect, the password error message displays lasting for three 
seconds, and the message INPUT PASSWORD displays for your retry. You 
can press MENU/EXIT to cancel...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 32
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the 
direction arrow keys for navigating the picture.
• Using the remote control
1. Press Digital Zoom+/Digital Zoom- to display 
the Zoom bar.
2. Press Digital Zoom + to magnify the center of 
the picture. Press the key repeatedly until the 
picture size is suitable...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation33 3. Press  /  to select an aspect ratio to suit the format of the video signal and your 
display requirements.
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white portions are active 
areas. OSD menus can be displayed on those unused black areas.
1.Auto: Scales an image proportionally to fit the 
projectors native resolution in its horizontal...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 34
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined 
picture modes so that you can choose one to suit 
your operating environment and input signal 
picture type.
To select an operation mode that suits your need, 
you can follow one of the following steps.
•Press MODE/ENTER o n  t h e  re m o t e  c o n t ro l  
or projector repeatedly until your...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation35
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall 
which may not be white, the Wall Color feature can help correct the projected picture’s 
color to prevent possible color difference between the source and projected pictures.
To use this function, go to the DISPLAY > Wall Color menu and press  /  to select 
a color which is the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 36
Selecting a Color Temperature
The options available for color temperature* settings vary according to the signal type 
selected.
1.Cool: Makes images appear bluish white.
2.Normal: Maintains normal colorings for white.
3.Wa r m: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be white for various purposes. 
One of the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation37 Please refer to the illustration to the right 
for how the colors relate to each other.
For example, if you select Red and set its 
range at 0, only pure red in the projected 
picture will be selected. Increasing its range 
will include red close to yellow and red close 
to magenta.
5. Press   to highlight Saturation and adjust 
its values to your preference by pressing  /
. Every...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 38
Setting the presentation timer
The presentation timer can indicate the presentation 
time on the screen to help you achieve better time 
management when giving presentations. Follow these 
steps to utilize this function:
1. Press Timer Set up on the remote control or go 
to the SYSTEM SETUP: Basic > Presentation 
Timer menu and press MODE/ENTER to display 
the Presentation Timer page.
2....

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation39 Press MODE/ENTER. A confirmation message displays.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message 
“Timer is Off!” displaying on the screen.
How to use the Timer On key?
Timer On is a multi-functional key.
• If the presentation timer is off, pressing this key displays a 
confirmation message. You can decide whether to 
activate the timer or not by following the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 40
Freezing the image
Press   on the remote control to freeze the image. The 
word FREEZE will display in the screen. To release the 
function, press any key (except the 
Page Up/Down key) on 
the projector or remote control.
Even if an image is frozen on the screen, the pictures are 
running on the video or other device. If the connected devices 
have active audio output, you will still...