BenQ Mw712 Users Manual

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsConnection21
Connecting Video source devices
You need only connect the projector to a Video source device using just one of the above 
connecting methods, however each provides a different level of video quality. The method 
you choose will most likely depend upon the availability of matching terminals on both the 
projector and the Video source device as described below:
Te r m i n a l
nameTerminal...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsConnection 22
Connecting an HDMI source device
The projector provides an HDMI input jack that allows you to connect it to an HDMI 
source device like a DVD player, a DTV tuner, a display or a notebook computer.
HDMI (High-Definition Multimedia Interface) supports uncompressed video data 
transmission between compatible devices like DTV tuners, DVD players and displays over a 
single cable. It...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsConnection23
Connecting a Component Video source device
Examine your Video source device to determine if it has a set of unused Component Video 
output jacks available: 
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a Component Video source device:
1. Take a Component Video to VGA...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsConnection 24
Connecting an S-Video/composite source device
Examine your Video source device to determine if it has an unused S-Video/composite 
output jack available: 
• If it has both jacks, use the S-Video output jack for connection as the S-Video terminal 
provides better picture quality than the Video terminal.
• If it has either of the output jack, you can also continue with this procedure.
•...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation25
Operation
Starting up the projector
1. Plug the power cord into the projector and into 
a power outlet. Check that the POWER 
indicator light on the projector lights orange 
after power has been applied.
• Please use the original accessories (e.g. power cable) 
only with the device to avoid possible dangers such as 
electric shock and fire.
• If Direct power on function is activated in...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 26
Adjusting the projected image
Adjusting the projection angle
The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. 
These adjusters change the image height and projection angle. To adjust the projector:
1. Press the quick-release button and lift the 
front of the projector. Once the image is 
positioned where you want it, release the 
quick-release button...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation27
Fine-tuning the image size and clarity
1. Adjust the projected image to the size that 
you need using the zoom slide ring.
2. Then sharpen the image by using the focus 
ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either 
the top or bottom. It occurs when the projector is not perpendicular to the screen. 
To correct this,...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 28
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various 
adjustments and settings.
Below is the overview of the OSD menu.
The following example describes how to set the OSD language.
1. Press MENU/EXIT on the projector or 
remote control to turn the OSD menu 
on.3. Press  to highlight 
Language and press  /  to 
select a preferred language.
2. Use...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation29
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a 
lock, such as the Kensington lock, to secure the projector. You can locate a Kensington 
lock slot on the rear side of the projector. See item 21 on page 9 for details.
A Kensington security cable lock is usually a combination of key(s) and the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com BenQ ManualsOperation 30the password recall procedure. See Entering the password recall procedure on page 30 
for details.
If you enter an incorrect password 5 times in succession, the projector will automatically 
shut down in a short time.
Entering the password recall procedure
1. Press and hold AUTO on the projector or 
remote control for 3 seconds. The projector 
will display a coded number on the screen.
2....