BenQ Mp511 Dlp Users Manual
Here you can view all the pages of manual BenQ Mp511 Dlp Users Manual. The BenQ manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Operation 31 Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input source picture type. To select a operation mode that suits your need, you can follow one of the following steps. •Press MODE/Enter on the remote control or projector repeatedly until your desired mode is selected. •Go to the Picture > Picture Mode menu and press Left/Right to select a desired mode. The...
Page 32
Operation 323. Press Left/ Right to select User 1 Mode or User 2 Mode. 4. Press Down to highlight Reference Mode. 5. Press Left/ Right to select an picture mode that is closest to your need. 6. Press Down to select a menu item to be changed and adjust the value with Left/ Right. See Fine-tuning the image quality in user modes below for details. 7. When all settings have been done, highlight Save Settings and press MODE/Enter to store the settings. 8. The confirmation message Setting Saved displays....
Page 33
Operation 33 1.T1: With the highest color temperature, T1 makes the image appear the most bluish white than other settings. 2.T2: Makes images appear bluish white. 3.T3: Maintains normal colorings for white. 4.T4: Makes images appear reddish white. *About color temperatures: There are many different shades that are considered to be white for various purposes. One of the common methods of representing white color is known as the “color temperature”. A white color with a low color temperature appears to...
Page 34
Operation 34If you select Red and set its value at 0, only the saturation of pure red will be affected. Every adjustment made will reflect to the image immediately. 6. Press d to highlight Gain and adjust its values to your preference by pressing eLeft orfRight. The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately. 7. Repeat steps 3 to 6 for other color adjustments. 8. Make sure you have made all of the desired adjustments....
Page 35
Operation 35 4. Press Down to highlight Timer Position and set the timer position by pressing Left/Right . Upper left lower left upper right lower right 5. Press Down to highlight Timer Counting Direction and select your desired counting direction by pressingLeft/ Right . 6. Press Down and press Left/Right to select On. Press MODE/Enter to confirm. 7. A confirmation message displays. Highlight Ye s and press MODE/Enter to confirm. You will see the message “Timer is On” displaying on the screen....
Page 36
Operation 36You can set the blank time in the SYSTEM SETUP: Basic > Blank Timer menu to let the projector return the image automatically after a period of time when there is no action taken on the blank screen. Once BLANK is pressed, the projector enters Economic mode automatically. Do not block the projection lens from projecting as this could cause the blocking object to become heated and deformed or even cause a fire. Locking control keys To prevent unauthorized changes in the settings or...
Page 37
Operation 37 Utilizing FAQ function The Information menu contains possible solutions to problems encountered by users regarding image quality, installation, special feature operation and service information. 1. To enter the Information menu, press Left/ on the remote control. 2. Press Up or Down to select FAQ-Image and Installation or FAQ-Features and Service. 3. Press MODE/Enter. 4. Press Up or Down to select the a problem and press MODE/Enter for possible solutions. 5. Press MENU/Exit to exit the...
Page 38
Operation 38 Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance. •Menu Display Time in the SYSTEM SETUP: Advanced > Menu Settings menu sets the length of time the OSD will remain active after your last button press. The time length ranges from 5 to 30 seconds in 5-second increments. Use Left/Right to select a suitable time. •Menu Position in the...
Page 39
Operation 39 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options DISPLAY Wall ColorOff/Light yellow/Pink/Light Green/Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9 Keystone Position Phase H. Size Digital Zoom PICTURE Picture ModePC source: Dynamic/ Presentation/sRGB/Cinema/User 1/User 2 Video source: Dynamic/ Standard/Cinema/User 1/User 2 Reference ModePC source: Dynamic/ Presentation/sRGB/Cinema Video...
Page 40
Operation 40 SYSTEM SETUP: Basic Presentation TimerTimer period 1~240 minutes Timer display Always/1 min/2 min/3 min/Never Timer positionBottom-right/Top-right/Bottom- left/Top-left Timer counting directionCount down/Count up On/Off Language Projector PositionFront table/Rear table/Rear ceiling/Front ceiling Auto Power OffDisable/5 min/10 min/15 min/20 min/25 min/30 min Blank TimerDisable/5 min/10 min/15 min/20 min/25 min/30 min Panel Key Lock On/Off Timer ControllerDisable/30 min/1 hr/2 hr/3 hr/4...