BenQ Mk2442 Users Manual

English
28 Connecting video and audio signals
Connecting the DVI input
1. Connect the digital video output of your output equipment (for example, a PC or 
digital Set Top Box) to the HDMI IN terminal on the TV using a DVI to HDMI 
adaptor cable (not provided).
2. Connect the DVI audio output of your output equipment to the TV's PC AUDIO  INPUT input terminals using an appropriate audio cable (not provided).
To view video image from this input, press 
 INPUT and use  ▲▼ button to select 
HDMI then...

English
Connecting video and audio signals     29
Connecting the headset audio output
This display provides a stereo headset output socket for delivering the audio signal to a 
stereo headset.
Connect the stereo headset plug (3.5mm Mini-jack type) to the stereo headset output 
socket on the display using a suitable audio cable.
 
Once connected, the display speakers will be muted automatically
.
Headset
 

English
30 OSD (On-Screen Display) menu
OSD (On-Screen Display) menu
OSD structure
Input signal type
DTV AT VSCARTYPbPrHDMI  AVS-Video VGA
PICTURE •	Picture	Mode
•	Contrast
•	Brightness
•	Colour
•	Tint
•	Sharpness
•	Colour	Temperature
•	Red
•	Green
•	Blue
•	
Aspect	Ratio
•	Backlight
•	Senseye •	Picture	Mode
•	Contrast
•	Brightness
•	Colour
•	Tint
•	Sharpness
•	Colour	
Temperature
•	Red
•	Green
•	Blue
•	 Aspect	Ratio
•	Backlight
•	 Auto	 Adjust
•	H-Pos
•	 V-Pos
•	Size
•	Phase
SOUND •	Sound	Mode
•	Balance...

English
OSD (On-Screen Display) menu    31
Input signal type
DTV AT VSCARTYPbPrHDMI  AVS-Video VGA
OPTION •	HDMI	RGB	Range
•	Over	Scan
•	Memory	Recall
LOCK •	Lock	System
•	Set	Password
•	Block	Program
•	Parental	Guidance not available
CHANNEL •	Select
•	
Auto	Tuning
•	DTV	Manual	Tuning
•	 ATV	Manual	Tuning
•	Programme	Edit
•	CI	Information not available
  
The available menu items are dependent on the input source being selected. Unavailable items 
will be greyed out or not displayed.
 

English
32 OSD (On-Screen Display) menu
Navigating the OSD menu
 You can use the On-Screen Display (OSD) menu to adjust the settings on your 
display. To display the OSD menu, press MENU  on the display:
Operations in the OSD menu
For example, to adjust picture sharpness:
1. Press MENU to display the OSD menu on-screen.
2. Press  ◄ or 
► to select your main menu.
3. Press OK to enter the submenu.
4. Press  ▲ or 
▼ to make selection.
5. Press  ◄ or 
► to make adjustment.
6. Press MENU  to close the OSD...

English
OSD (On-Screen Display) menu    33
PICTURE menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference
only.
ItemFunction OperationRange
Picture
Mode Provides complete preferred setups adjusted for 
colour, contrast, brightness, tint, and sharpness to 
suit various viewing situations. 
If User is selected, you can customize individual 
picture setting to your satisfaction: Contrast, 
Brightness, Colour, Sharpness, and Tint.

When DCR is ON,...

English
34 OSD (On-Screen Display) menu
Item Function OperationRange
Aspect 
Ratio Selects through Wide mode settings. Press 
◄ or 
► to 
change selection. •	Full
•	Zoom1
•	Zoom2
•	Panorama
•	
Auto
•	4:3
•	Under	Scan	 or 16:9
Backlight Adjusting the backlight brightness. Press 
◄ or 
►  to make 
adjustment. 0 to 5
Senseye To set ACE, Noise Reduction, and Skin Tone.
ACE Advance contrast enhance. (Standard, Low, Off, 
High)
Press ◄ or 
► to 
change selection 
or make 
adjustment. •	Standard
•	Low
•	Off
•...

English
OSD (On-Screen Display) menu    35
Setting up User Picture mode
You can adjust the settings in the Picture menu and save them as your
Personal Picture Mode. You can press PICTURE on the remote control to select these 
modes directly.
  1.  Press MENU  to display the OSD menu on-screen.
  2.  Press 
◄ or 
► to select PICTURE, and then press OK to enter the PICTURE menu.
  3.  Press 
▼ to select Picture Mode, and then press 
◄ or 
► to select User
.
  4.  Press 
▲ or 
▼to select Contrast,...

English
36 OSD (On-Screen Display) menu
SOUND menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference
only.
Item Function OperationRange
Sound 
Mode Selects a sound type when viewing programs or 
videos that support multiple sounds.

If you select the User mode, you can individually 
set the Bass and Treble.
Press  ◄ or 
► to 
change selection or 
make adjustment. •	Standard
•	Music
•	Movie
•	Sports
•	User
Balance Adjusts the volume balance of...

English
OSD (On-Screen Display) menu    37
TIME menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference
only.
ItemFunction OperationRange
Clock Selects to set the current clock.

When in DTV input source, Clock cannot be 
adjusted. The clock will be synchronized with 
TV broadcasting.Press OK, use  ◄ 
or  ► to change 
selection. •	Date
•	Month
•	
Year
•	Hour
•	Minute
Off Time Allows to set the Off timers that the TV will 
switch off automatically...