BenQ Mk2442 Users Manual

English
8  Section 1: Quick Start Guide
9. Activate the remote control
Installing batteries
    1.  Turn the remote control to reveal its back side, 
and open the lid of the battery compartment.
    2.  Insert the batteries (supplied) ensuring that the 
positive and negative marked battery terminals 
match the (+) and (-) marks in the battery 
compartment. Note that these batteries are 
provided for your convenience so that you can 
operate the display straight away. You should 
replace them as soon as...

English
Section 1: Quick Start Guide     9
Using the remote control
 
1.   Point and aim the top front of the remote 
control directly at the display when pressing the 
buttons.  
  2.  The remote control must be held at an angle 
within 30 degrees of the display's remote control 
sensor window to function correctly. The 
distance between the remote control and the 
sensors should not exceed 5 meters.
  3.  Do not cover the sensor window on the front of 
the display (below the power indicator lamp),...

English
10  Section 1: Quick Start Guide
Before you can use your TV to view TV programs, you need to let it search for and tune 
TV station programs appropriate to your region. This process only needs to be done when 
the TV is newly installed, or whenever you install it in OSD menu for convenience of 
operation.
  1.  When Language  is highlighted, use the 
◄ or 
► buttons to select the language dis-
played on the menu.
  2.  Press 
▼ button to select Auto Tuning and press the OK
 button.
  3.  Press 
◄...

English
Section 1: Quick Start Guide     11
Care and cleaning information
•		 Always	turn	off	the	display	and	disconnect	it	from	the	mains	power	before	cleaning.
•		 Do	NOT	use	cream, 	liquid,	aerosol	or	spray	cleaners. 	Use	only	a	slightly	damp	well	
wrung-out (drip-free) and lint-free, clean soft cloth and lightly wipe the display.
  If necessary, use a pH-neutral liquid dish-washing detergent diluted with water on a 
separate clean lint-free cloth to remove oil or grease marks. Wipe over again with a...

English
MK2442 LCD TV
Section 2: User Manual
Welcome
 

English
Getting to know your TV     13
Getting to know your TV
 
Front view
No.Name Description
1 VOL +/- button • Adjusts the volume level of the speakers.
• In the OSD menu, moves the selection highlight left or right or 
changes settings.
2 MENU button Displays the OSD (On-Screen Display) menu if not visible, or 
exits the current menu if displayed.
3 Power/Standby 
button Toggles the display between standby mode and on.
4 CH +/- button • Press these buttons to sequentially change channels.
• In the...

English
14 Getting to know your TV
Rear view
No. Name Description
A AC Power Input Connect to a AC power source.
B Headphone Jack Connect to your headphones.
C HDMI Input Terminal Connect to the HDMI digital audio/video output or DVI 
digital video output on digital video devices.
D VGA (PC Video Input) Connect to the RGB video (D-sub) output of PCs. 
E PC/DVI Audio In Connect to the audio output of PCs. This jack is used for 
PC Audio input, when the picture input is connected to 
VGA or DVI (via HDMI...

English
Getting to know your TV     15
No.Name Description
K RF Antenna / Cable TV 
Input Connect to RF Cable or CATV cable.
L CAM Card Slot Plug the CAM Card into this slot.
 

English
16 Getting to know the remote control
1
22
23
25
24
26
2
3
4
8
6
7
12
11
10
13
15
21
5
9
20
18
14
19
27
30
29
28
31
16
17
1.  POWER
Press this button to power the TV on or put it to the 
standby mode.
2. DTV/RADIO
Digital TV function. Switch between DTV/R ADIO 
programs.
3. INFO
Press this button to display the input source 
4. SLEEP
Press this button to set the automatic shut-off timer.
5. SOUND
To select sound mode from Standard, Music, Movie, 
Sports, and User.
6. FREEZE
Press this button to...

English
Getting to know the remote control     17
1
22
23
25
24
26
2
3
4
8
6
7
12
11
10
13
15
21
5
9
20
18
14
19
27
30
29
28
31
16
17
14.  Red 
Function key for teletext, program edit, or electric 
program guide.
15. 
 Green
Function key for teletext, program edit, or electric 
program guide. 
16. 
  Ye l l o w
Function key for teletext, program edit, or electric 
program guide. 
17. 
 Blue
Function key for teletext, program edit, or electric 
program guide. 
18 .  Senseye
 
Press this button to display...