BenQ Mk2442 Users Manual

English
Table of Contents     i
Table of Contents
 
 Section 1: Quick Start Guide  ....................................1
   1.  Please read these instructions  .......................................2
       What's in the Quick Start Guide?  ............................................2
        What's in the User Manual?  ..................................................... 2
   2.  Package contents  ............................................................ 2
    3.  Select and prepare the...

English
ii Table of Contents
        Connecting the Composite Video input  .................................25
        Connecting the SCART input  .................................................. 26
        Connecting the Component Video input   ..............................26
        Connecting the S-Video input   ................................................27
        Connecting the PC input  ......................................................... 27
        Connecting the DVI input...

English
MK2442 LCD TV
Section 1: Quick Start Guide
Welcome
 

English
2  Section 1: Quick Start Guide
1. Please read these instructions
Congratulations. You have a state-of-the-art flat widescreen digital LCD TV which should 
provide you with years of viewing pleasure. Please take a few minutes to read these quick 
start instructions through before installing and using the TV.
What's in the Quick Start Guide?
Section 1 contains the Quick Start Guide which provides you with enough information to 
setup the TV. This is section 1.
What's in the User Manual?...

English
Section 1: Quick Start Guide     3
3. Select and prepare the installation location
In order to prevent potential dangers and prolong the service life of the TV, please observe 
the following points when installing, operating and cleaning the TV.Do NOT place the display on an
uneven, sloping or unstable surface 
where it may fall and cause damage to 
itself or others. 
Have a qualified technician secure the 
display where it is placed in case there 
is an earthquake.
Do NOT place the display near...

English
4  Section 1: Quick Start Guide
4. Installing the Base
Important safety notes
 Please pay attention to the following before installing:
	 	 •		 For	safety	reasons, 	it	is	recommended	that	the	installation	be	carried	out	by	at	
least two adult persons.
	 	 •	 The	LCD	panel	of 	the	display	is	extremely	fragile	and	subject	to	damages	easily. 	
Avoid touching the LCD panel when installing or moving the display, and 
take precautions not be let any objects come into contact with the panel. It is...

English
Section 1: Quick Start Guide     5
5. Disconnecting the base and arm
1. Cover an even stable surface with a soft cloth. Place the LCD Display unit face down on the cloth. Fit the stand onto the bottom of the LCD Display unit as shown:
2.  Push  inward  the  two  inserts  located  under  the  stand  base  of  the  LCD  Display,  as  shown above by (2), to take the inserts apart from the base. 
3. Remove the base from the arm, as shown above by (3).
4. Pull the hinge cover on the arm upward to...

English
6  Section 1: Quick Start Guide
7. Connect the antenna cable
Connect a TV antenna cable fly-lead from your TV antenna system or Cable TV (CATV) to 
the TV input on the TV. Check to make sure that the cable connection is firmly in place.
•		 A	poor	quality	TV	signal	will	produce	a	poor	picture	and/or	sound	on	your	TV. 	For	
high quality picture and sound ,you will need a high quality TV signal.
  Depending upon your location, for best TV signal reception, you should have a 
properly aligned...

English
Section 1: Quick Start Guide     7
8. Connect the power cable
1. Locate the power cable from the packaging, and plug the appropriate end into the AC IN socket on the rear of the TV (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, the TV will enter  standby mode and the power indicator (on the front lower center) will light up 
orange.
	 	 •	 The	type	of
	power	cable	plug	and	socket	illustrated	may	differ	from	the	type	used	in	your	region.
	 	 •	 Only	use	an...