BenQ Fp241w User Manual

  21   Getting the most from your BenQ monitor
How to install on Windows XP system
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. 
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel. 
In Windows XP version, Control Panel is located directly under the main Start menu item. 
The menu options displayed will depend upon which type of view is selected for...

22  How to adjust the screen resolution  
5. How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the screen resolution is always fixed. 
For the best display performance, please set the display resolution to 1920 x 1200 pixels with an 
aspect ratio of 16:10. This is called “Native Resolution” or maximal resolution – that is, the clearest 
picture. Lower resolutions are displayed on a full screen through an interpolation circuit. Image 
blurring across pixel...

  23   How to adjust the screen refresh rate
6. How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LCD display to flicker. The best results are obtained by using the factory 
modes already set in your computer. There is a table with the factory modes in the specification 
section of this User Manual: 
Supported PC Timings on page 46.
You can choose 60 Hertz for the native resolution of 1920 x...

24  Picture optimization  
7. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the i  key 
function. Press the 
i  key to optimize the currently displayed image to the screen. 
When you connect a digital video output using a digital (DVI) cable to your monitor, the i key and the Auto 
Adjustment function will be disabled, because the monitor will automatically display the best image. 
Please ensure that the connected graphic card on your computer...

  25   How to adjust your monitor
8. How to adjust your monitor
The control panel
1. “Power”: Turn the power on or off.
2. “ENTER/PIP” key: Enter sub menus and select items. The key is also the hot key for activating 
the PIP (Picture-in-Picture) function and selecting a video input source for the PIP window.
3.
t (Up) key: For Up/Increase adjustment. The key is also the hot key for Brightness.
4.
u (Down) key: For Down/Decrease adjustment. The key is also the hot key for Contrast.
5. “MENU/EXIT” key:...

26  How to adjust your monitor  
On Screen Display (OSD) menu structure 
DISPLAYAuto Adjustment
H. Position
V.  P o s i t i o n
Pixel Clock
Phase
Red
PICTUREBrightness
Normal Green
Contrast
Bluish Blue
Sharpness
Reddish
Color
User Mode YES
DynamicContrast
Reset Color NO
Hue
Saturation ON
OFF
Hue and Saturation are not available for use when the input source is D-Sub or DVI-D.
PICTURE
ADVANCEDPicture Mode
Standard
Senseye Demo
Movie
Overscan
Dynamics
Photo
sRGB
ON
OFF
ON
OFF
Overscan is not available for...

  27   How to adjust your monitor
 SYSTEM
InputD-sub English
Display Mode
DVI French
OSD Settings
HDMI German
DDC/CI
Component Italian
Information Composite
Spanish
Reset All  S-Video
Polish/Japanese
Czech/Traditional 
Chinese
FullHungarian/Simplified 
Chinese
Aspect
Serbo-croatian
1: 1
Romanian
Dutch
Language
Russian
H. Position Swedish
V. Position Portuguese
Display Time
OSD Lock 5 Sec.
10 Sec.
ON 15 Sec.
OFF 20 Sec.
25 Sec.
YES 30 Sec.
NO
ON
OFF
 

28  How to adjust your monitor  
Hot key mode
The monitor keys perform as hot keys to provide direct access to particular functions whenever 
the menu isnt currently displaying on-screen.
Brightness hot key
Contrast hot key 
PIP hot key Press the 
t key to display the Brightness 
indicator. Further press the 
t key to 
increase or the 
u key to decrease the screen 
brightness, and press the MENU key to exit. 
Press the 
u key to display the Contrast indi-
cator. Further press the 
t key to increase or...

  29   How to adjust your monitor
Mode hot key•If the input source of the main window is from the computer graphic/PC video signals 
(D-sub, DVI, HDMI, or Component), you will cycle through the following messages 
indicating the video input sources for the PIP window.
•If the input source of the main window is from the video signals (Composite or S-video), 
you will cycle through the following messages indicating the computer graphic/PC video 
signals for the PIP window.
Press the key continually to...

30  How to adjust your monitor  
Input /Swap hot key
The PIP function will not allow for 2 computer graphic/PC video sources or 2 video sources to perform 
PIP.
To specify an input video source for the PIP window, press Enter to make a selection. See also PIP hot 
key on page 28.
Press the Input/Swap key continually to 
select an input source for the main window 
or swap the input signals between the main 
window and the PIP window when the PIP 
function is activated.
To specify the input source, release...