BenQ Fp241w User Manual

  11   How to assemble your monitor hardware
6. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear of the monitor. Do not connect 
the other end to an electric outlet just yet. 
7. Rotate the monitor back.
Rotate the monitor 90 degrees clockwise (from the rear 
side) as illustrated, and adjust the monitor to a desired 
angle.
You should position the monitor and angle the screen to 
minimize unwanted reflections from other light...

12  How to assemble your monitor hardware  
Adjusting the monitor height and angle
To adjust the monitor height
Gently lift the display up and extend the stand to the desired height. The stand can be extended 
vertically up to 130mm.
If the monitor is locked in the down position, press the Lock down / release button on the bottom 
rear of stand to extend the monitor to a preferred height.  9. Turn on the power.
Connect the other end of power cable to the nearby elec-
tric outlet. 
Picture may differ from...

  13   How to assemble your monitor hardware
To adjust the monitor angle
For comfortable viewing of images on the screen, you may not only tilt the monitor upward to 20 
degrees and downward to -5 degrees, but also swivel the monitor to 45 degrees on either left or 
right direction.
Rotating the monitor (optional)
Your LCD monitor also supports portrait viewing orientation, allowing you to fit your specific 
desktop application without needing to scroll down.
Before rotating the display with a portrait...

14  How to assemble your monitor hardware  
To rotate the display
1. Fully extend the monitor and tilt it.
Gently lift the display up and extend the stand to the maxi-
mum extended position.
If the monitor is locked at the lowest position, you have to 
press Lock down / release button on the bottom rear of 
stand to extend the stand to the maximum extended posi-
tion. 
The stand should be vertically extended to allow the 
monitor to rotate from landscape to portrait mode. 
Then tilt the monitor. 
2....

  15   How to assemble your monitor hardware
3. Adjust the monitor to the desired viewing angle.
 

16  Getting the most from your BenQ monitor  
4. Getting the most from your BenQ monitor
Monitors and USB hubs
Your BenQ FP241W
 LCD Monitor is a modern state-of-the-art device. It not only utilizes the 
latest LCD display technology currently available – it contains a built-in 2 port USB 2.0 hub. Using 
only one USB 2.0 port on your computer (freeing the others up for other uses), the built-in hub 
provides close, handy, easy-to-use access for your USB devices. You could use the USB hub to 
plug-in your...

  17   Getting the most from your BenQ monitor
Furthermore, if your computer is connected to a network which has security access requirements, network 
policy settings may prevent you from installing software on your computer. 
 

18  Getting the most from your BenQ monitor  
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that...

  19   Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible (and recommended 
only) for Windows XP and Windows Vista Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no...

20  Getting the most from your BenQ monitor  
How to install on Windows Vista system
1. Open Display Settings.
Right-click the desktop and select Personalize from the popup menu.
Select Display Settings from the Personalize appearance and sounds window. 
The Display Settings window will display.
2. Click the Advanced Settings button. 
The Generic PnP Monitor Properties window will display.
3. Click the Monitor tab and the Properties button.
4. Click Continue in the prompted User Account Control window....