BenQ Fp241w User Manual

Welcome
FP241W
24 Wide-Screen LCD Monitor
User Manual
 

2   
Copyright
Copyright © 2007 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 6
Front view  ....................................................................................................................6
Back view (1)...

4  Getting started  
1. Getting started
Your FP241W will provide the optimal display performance of the video resolution standard of 
1920 x 1200. Please ensure that your graphic card supports the resolution of 1920 x 1200. 
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Stand
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region)
 

  5   Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Signal Cable: D-Sub
Signal Cable: DVI-D (optional)
USB cable (optional)
 

6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view (1)
1. USB device port for optional Web cam unit
2. USB device ports for connection to built-in USB hub
3. Cable holder
4. Lock down / release button
 

  7   Getting to know your monitor
Back view (2): locations of plugs & sockets
Right-side view
For more information about these keys, please refer to The control panel on page 25.
1. Power AC input connector 5. Component input connector
2. DVI-D input connector 6. Composite input connector
3. HDMI input connector 7. S-Video input connector
4. D-Sub input connector 8. USB hub socket for connection to 
    computer USB port
1. Power 5. MENU / EXIT
2. ENTER / PIP 6. Mode
3. 
t / Brightness7. Input / Swap
4....

8  How to assemble your monitor hardware  
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Unpack the package and place the monitor stand 
firmly.
2. Attach the monitor to the stand until it locks.
Align the grooves on back of the monitor against the tabs 
on the monitor stand, and then push the monitor forward 
until you hear a clicking sound. 
3. Fully extend...

  9   How to assemble your monitor hardware
Then tilt the monitor. 
To avoid the edge of the LCD display hitting the 
monitor base surface while it is being rotated, do tilt 
and extend the monitor to the highest position before 
you start to rotate the display. 
Rotate the monitor 90 degrees counter-clockwise (from 
the rear side) as illustrated.
To use the monitor in a vertical (portrait) orientation, see 
Rotating the monitor (optional) on page 13 for more 
information.
 

10  How to assemble your monitor hardware  
4. Connect the PC video cable.   
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems. 
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the other end to the DVI-D port on 
your computer. (optional)
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or...