BenQ Fp241vw User Manual

  41   How to adjust your monitor
Audio menu
The Audio menu is only available when the HDMI cable is connected to the monitor and HDMI is set to 
be the input signal for the main window.
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select AUDIO 
and then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5....

42  How to adjust your monitor  
System menu
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select SYSTEM 
and then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU key.
ItemFunctionOperationRange
Input Selects the video input for 
the main window. Use this...

  43   How to adjust your monitor
Display Mode This feature is provided to 
allow aspect ratio’s other 
than 16:10 to be displayed 
without geometric 
distortion.
• Full - Scales the input 
image to fill the screen. 
Ideal for 16:10 aspect 
images.
• Aspect - The input image 
is displayed without geo-
metric distortion filling 
as much of the display as 
possible. 16:9 images will 
fill the screen horizon-
tally while 4:3 images 
will fill the screen verti-
cally.
• 1:1- Displays the input 
image in its...

44  How to adjust your monitor  
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics 
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for 
remote diagnostics.
H. Position Adjusts the horizontal 
position of the OSD menu. 
Press the 
t or u keys to 
adjust the value.0 to 100
V. Position Adjusts the vertical 
position of the OSD menu.0 to 100
Display Time Adjusts the display time of 
the OSD menu.• 5 Sec.
•...

  45   Troubleshooting
9. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 20 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 21 section It 
is...

46 Troubleshooting  
If the LED is illuminated in orange, the power management mode is active. Press any key on the 
computer keyboard or move the mouse. If that does not help, check the signal cable connectors. If 
any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the 
How to adjust...

  47   Supported PC Timings
10. Supported PC Timings
•Image disruption may occur as a result of signal frequency differences from graphic cards which 
do not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by manually changing the phase setting and the pixel 
frequency from the “Display” menu.
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming...

48 Specifications  
11. Specifications
ModelFP241VW
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Dynamic contrast ratio
Response time*
Viewing angle (left/right, up/down) 24.0”, active, TFT
611.32 mm
1,920 x 1200
16.7 million
1000:1 / 500 cd/m
2
2000:1 (typical)
16 ms 
  6 ms (GTG*)
12 ms (MPRT*, PerfectMotion* Level 3)
178, 178 (CR>
10)
Line frequency 
Image frequency30 - 81 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image...

  49   Specifications
*Response Time: The time it takes to switch a pixel off and then on and then off again (or from black to 
white and back to black). A low response time is desirable for the display of moving images without 
ghosting. The Response Time quoted for many LCD monitors is specific to transitions from black to white 
and back again, it does not specify the time required to switch between the many gray levels or colors 
that make up an image. 
*Gray to Gray or GTG Response Time: “Real...