BenQ Fp241vw User Manual

  21
  How to adjust the screen refresh rate
6. How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh  rate on an LCD display, because it is not 
technically possible for an LCD display to flicker.  The best results are obtained by using the factory 
modes already set in your computer. There is a  table with the factory modes in the specification 
section of this User Manual: 
Supported PC Timings on page 47
You can choose 60, 70 and 75 Hert z, (but not 72Hz) for...

22  Picture optimization  
7. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the  i key 
function. Press the  i
 key to optimize the currently displayed image to the screen. 
When you connect a digital video output using a digital (DVI) cable to your monitor, the  i key and the  Auto 
Adjustment  function will be disabled, be cause the monitor will automatica lly display the best image. 
Please ensure that the connected graphic card on your...

  23
  How to adjust your monitor
8. How to adjust your monitor
The control panel
1. “Power”: Turn the power on or off.
2. “ENTER/PIP” key: Enter sub menus and select item s. The key is also the hot key for activating 
the PIP (Picture-in-Picture) function and select ing a video input source for the PIP window.
3.
t (Up) key: For Up/Increase adjustment. The key is also the hot key for  Brightness.
4.
u (Down) key: For Down/Decrease adjustment. The key is also the hot key for  Contrast.
5. “MENU/EXIT”...

24  How to adjust your monitor  
On Screen Display (OSD) menu structure 
DISPLAYAuto Adjustment
H. Position
V.  P o s i t i o n
Pixel Clock
Phase
Red
PICTURE Brightness
Normal Green
Contrast
Bluish Blue
Sharpness
Reddish
Color
User Mode YES
DynamicContrast
Reset Color NO
Hue
Saturation ON OFF
Hue  and  Saturation  are not available for use when the input source is D-Sub or DVI-D.
PICTURE
ADVANCED Picture Mode
Standard
Senseye Demo
Movie
Overscan
Dynamics
PerfectMotion
Photo
Action Game
Racing Game
ON...

  25
  How to adjust your monitor
 SYSTEM
InputD-sub English
Display Mode
DVI French
OSD Settings
HDMI German
DDC/CI
Component Italian
Information Composite Spanish
Reset All  S-Video Polish/Japanese
Czech/Traditional 
Chinese
Full Hungarian/Simplified 
Chinese
Aspect Serbo-croatian
1: 1 Romanian
Dutch
Language Russian
H. Position Swedish
V. Position Portuguese
Display Time
OSD Lock 5 Sec. 10 Sec.
ON 15 Sec.
OFF 20 Sec. 25 Sec.
YES 30 Sec.
NO ON
OFF
 

26  How to adjust your monitor  
Hot key mode
The monitor keys perform as hot keys to provide direct access to particular functions whenever 
the menu isnt currently displaying on-screen.
Brightness hot key
Contrast hot key 
PIP hot key  Press the 
t key to display the 
Brightness 
indicator. Further press the 
t key to 
increase or the 
u key to decrease the screen 
brightness, and press the  MENU key to exit. 
Press the 
u key to display the  Contrast 
indicator. Further press the 
t key to 
increase...

  27
  How to adjust your monitor
Mode hot key •
If the input source of the main window is  from the computer graphic/PC video signals 
(D-sub, DVI, HDMI, or Component), you will cycle through the following messages 
indicating the video input sources for the PIP window.
• If the input source of the main window is from the video signals (Composite or S-video), 
you will cycle through the following messages indicating the computer graphic/PC video 
signals for the PIP window.
Press the key continually to...

28  How to adjust your monitor  
Game Mode hot key
Input /Swap hot keyPress the key continually to switch between 
the 3 modes for the main window, including 
Standard
, Action Game , and Racing Game . 
The setting will take effect immediately.
See also  
Picture Mode on page 36. 
Press the  Input/Swap  key continually to 
select an input source for the main window 
or swap the input sig nals between the main 
window and the PIP window when the PIP 
function is activated.
To specify the input source,...

  29
  How to adjust your monitor
The  PIP  function will not allow for 2 com puter graphic/PC video sources or  2 video sources to perform 
PIP.
To specify an input video source for the PIP window, press  Enter to make a selection. See also  PIP hot 
key on page 26 .
PerfectMotion hot key •
When the  PIP function is  ON, select between various input sources of the current video 
type (Computer Graphic/PC video or Video)  for the main window. The cycle will be 
performed in a specific sequence. Keeping...

30  How to adjust your monitor  
Main menu mode
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor. 
Press the  MENU key to display the following main OSD menu. 
The OSD menu languages may differ from the product supplied to your region, see “ Language on page 
43 ” under “OSD Settings” for more details. 
For more information on each menu, please refer to the following pages:
• Display menu on page 31
• Picture menu on page 33
• Picture Advanced menu on page 36
• PIP...