BenQ Fp202w User Manual

31 How to adjust your monitor   
Input Select:
Press the 
t or u keys to select D-sub 
(analog) or DVI (digital) input to activate the 
new settings.
Press the  Exit key to return to previous menu.
 
Sharpness:
Press the 
t or u keys to adjust the degree of 
Sharpness .
Press the  Exit key to return to previous menu.
 
Display Information:
Select  Display Information  to display the 
current monitor property settings. 
Press the  Exit key to return to previous menu.
 
 

  32
   Troubleshooting
Troubleshooting
Frequently Asked Questions (FAQ)
The image is blurred:
Read the  How to adjust the screen resolution on page18  section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the imag e now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page19 section It 
is...

33 Troubleshooting   
The image is distorted, flashes or flickers:
Read the How to adjust the screen resolution on page18  section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displace d in one direction:
Read the  How to adjust the screen resolution on page18  section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
Need More Help?
If your problems remain after checking this ma...

  34
   Supported PC Timings
Supported PC Timings
• Image disruption may occur as a result of signal  frequency differences from graphics cards which 
do not correspond with the usual standard. This is  not, however, an error. You may improve this 
situation by altering an automatic setting or by  manually changing the phase setting and the pixel 
frequency from the “Geometry” menu. 
• To extend the service life of the product, we  recommend that you use your computers power 
management function. 
1 1...

35 Specifications   
Specifications
BenQ FP202W
11
111
ModelFP202W
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down)  20.1 , active, TFT
51.1 cm
1,680 x 1,050 @ 60 Hz *
16.7
 million
600:1 / 300 cd/m
2
8 ms
140, 130 (CR=10)
Line frequency 
Image frequency 31 - 81 kHz Multi- 
frequency monitor
56 - 76 Hz, exception: 1680 x 1050 @ 60 Hz 
(Max.) only
Image diagnostics
Controls 
Functions Digital, OSD Technology,
 i...

  36
   Specifications
   *   Please note that not all graphics cards will  support the video resolution of 1680 x 1050. To obtain 
the optimal display performance, please inqu ire with the system manufacturer to confirm 
resolution support, or you may consider buying a graphics card supporting the resolution of 1680 
x 1050. 
Operating voltage 
Dimensions (H x W x D) 
Weight Automatic switched mode power supply, 
100-260 V, 50-60 Hz
396.7 x 479.6 x 169.9 mm
5.7 kg