BenQ Fp202w User Manual

							
Welcome
FP202W
20.1 (51.1cm) Wide-Screen LCD Monitor
User’s Manual
 
						

							
2   
Copyright
Copyright © 2006 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any me ans, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the pr ior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or  warranties, either expressed or implied, with 
respect to the contents hereof and specifically  disclaims any warranties, merchantability or fitness 
for any particular purpose. Further, BenQ Corporat ion reserves the right to revise this publication 
and to make changes from time to time in the  contents hereof without obligation of BenQ 
Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best 
performance, and long life for your monitor
Power Safet y
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect  device for pluggable equipment. The socket 
outlet should be instal led near the equipment  and be easily accessible.
• This product should be operated  from the type of power indicated on the marked label. If you are 
not sure of the type of power available, consult your dealer or local power company.
Care And Cleaning
• Cleaning. Always unplug your monitor from th e wall outlet before cleaning. Clean the LCD 
monitor surface with a lint-free, non-abrasive cl oth. Avoid using any liquid, aerosol or glass 
cleaners.
• Slots and openings on the back or  top of the cabinet are for ventilation. They must not be blocked 
or covered. Your monitor should never be placed ne ar or over a radiator or heat source, or in a 
built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Servicing
•Do not attempt to service this product yourself,  as opening or removing covers may expose you to 
dangerous voltages or other risks. If any of the ab ove mentioned misuse or other accident such as 
dropping or mishandling occurs, contact qual ified service personnel for servicing.
i
ii
iii
iv
v
 
						

							
3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  .. .......................................................................................... 6
Front View  ........................................................................\
........................................... 6
Back View ........................................................................\
............................................. 6
How to assemble your monitor hardwa re ........................................................................... 7
How to detach the stand base  ........................................................................\
........... 10
Getting the most from your BenQ mo nitor ...................................................................... 11
How to install the monitor on a new computer  ...................................................... 12
How to upgrade the monitor on an existing computer  .......................................... 13
How to install on Windows XP systems ................................................................... 14
How to install on Windows 2000, ME, & 98 systems  .............................................. 15
How to complete the Windows Upgr ade Device Driver Wizard  ........................... 16
How to adjust the screen resolution  .................................................................................. 18
How to adjust the screen refresh ra te ................................................................................ 19
How to set the picture optimization  .................................................................................. 20
How to adjust your monitor  ........... ................................................................................... 21
A Look at the Control Panel  ........................................................................\
............. 21
Hot Key Mode  ........................................................................\
................................... 22
Main Menu Mode .........................................................\
............................................. 24
Troubleshooting ....... ...................................................................................... .................... 32
Frequently Asked Questions (FAQ)  ........................................................................\
. 32
Need More Help? ........................................................................\
............................... 33
Supported PC Timings  ...................................................... ............................. .................... 34
Specifications ....... ......................................................... ...................................................... 35
i
 
						

							
  4
   Getting started
Getting started
Your FP202W will provide the optimal display performance of the video resolution standard of 
1680 x 1050. Please ensure that your graphic  card supports the resolution of 1680 x 1050. 
When unpacking please check you have the follow ing items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
  
1 1
11
BenQ LCD Monitor
Quick Start Guide
  
CD-ROM
Power Cord
Signal Cable: D-Sub
 
						

							
5 Getting started   
Consider keeping the box and packaging in storage for use in the future when you may need to 
transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Signal Cable: DVI-D (optional)
 
						

							
  6
   Getting to know your monitor
Getting to know your monitor
Front View
Back View 
1. DVI-D Connector
2. D-Sub Connector
3. Power AC input jack
1 1
12
 
						

							
7 How to assemble your monitor hardware   
How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler 
or a mouse will crack the glass or damage the LCD 
substrate voiding your warranty. Sliding or scraping 
the monitor around on your desk will scratch or 
damage the monitor surround and controls. 
Protect the monitor and screen by clearing a flat open area 
on your desk and placing a soft item like the monitor 
packaging bag on the desk for padding.
Lay the screen face down on a flat clean padded surface.
While holding the monitor firmly against the desk, pull 
the monitor stand arm upwards clear of the monitor. 
Orient and align the stand base socket with the end of the 
stand arm, then push them together until they click and 
lock into place. 
Gently attempt to pull them back apart to check that they 
have properly engaged.
Carefully lift the monitor, turn it over and place it upright 
on its stand on a flat even surface.
You should position the monitor and angle the screen 
to minimize unwanted reflections from other light 
sources.  
11
13
-2  ~+20
 
						

							
  8
   How to assemble your monitor hardware
2. Connect the PC video cable.   
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs 
with appropriate video systems. 
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the other and to the DVI-D port on 
your computer. (optional)
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or 
projectors. The digital video signals produce a 
superior quality picture  than analog video signals.
If you don’t have an appropriate DVI-D port on your 
computer, you can use the standard video D-Sub cable. 
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor D-Sub socket. Connect 
the other plug of the D-Sub cable (at the end with the 
ferrite filter) to the computer video D-Sub socket. 
Tighten all finger screws to prevent the plugs from 
accidently falling out during use.
Either
Or
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
’POWER IN’ on the rear of the monitor. Do not connect 
the other end to a power point just yet. 
 
						

							
9 How to install your monitor hardware   
4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip 
inwards as illustrated. Position the cables together and 
reinsert the clip over them to retain the cables neatly in 
place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point 
and turn it on.
Turn on the monitor by pressing the power button located 
at the top of the row of buttons on the right edge  of the 
monitor.
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from your BenQ monitor 
on page11
 to install the monitor software.
 
 
						

							
  10
   How to install your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the 
power cable. Turn off the computer before unplugging the 
monitor signal cable.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler 
or a mouse will crack the glass or damage the LCD 
substrate voiding your warranty. Sliding or scraping 
the monitor around on your desk will scratch or 
damage the monitor surround and controls. 
Protect the monitor and screen by clearing a flat open area 
on your desk and placing a so ft item like a towel on the 
desk for padding, before laying the screen face down on a 
flat clean padded surface.
2. Release the locking clip on one side of the stand base 
whilst pulling the edge of the base away from the 
stand arm.
3. Release the other locking clip  to detach the stand base 
from the monitor stand arm.