Beko Wmd 25100 Ts Users Manual

							11
Control Panel
1
1- Program progress display
2- Time delay selection button 
3- Time display
4- Program selection knob
5- Auxiliary function buttons
6- On / Off button5
42
3
6
 
						

							12
Auxiliary Functions
Express
Shortens washing time for lightly soiled fabrics.  This func-
tion can be used for cotton and synthetic programs for 
temperatures below 60°C. 
Rinse plus
By using this function your machine will add another rinse 
process to the three rinse processes that it has already 
done. This additional rinse will reduce any affects on sensi-
tive skin by washing leftover detergent. 
Easy-iron
To avoid wrinkling of your clothes, select this function. 
When Easy-iron is chosen please load less cloth, this way a 
special washing and spinning profile will reduce the wrin-
kles and your clothes will be easy to iron. 
Spin speed selection button
When you want to reduce the spin speed to 500 rpm, 
press this button.
   
 
 
						

							13
      Program Selection and Starting Machine4
Plug you machine to outlet. Turn on the machine by press-
ing “On / Off” key. Open the door by pulling the handle and 
load the machine without exceeding loading capacity and 
close the door. Specify the appropriate program by looking 
at program selection table according to type of laundry, 
degree of soiledness and washing temperature. Position 
program selection key to desired washing program-tem-perature.  Select convenient spin speed related to selected 
program. If you are using auxiliary function press desired 
auxiliary function key.
Afterwards place appropriate detergent and softener to 
your machine’s detergent drawer. Start your machine by 
pressing Start/Pause/Cancel button. Start/Pause/Cancel 
key’s led will be on. After your machine starts, you can fol-
 
						

							14
Program selection table
Programme
Max. Load (kg)
Programme Duration (~min)
Water Consumption (l)
Energy Consumption (kWh)
Quick Wash
Rinse Plus
Anti-Creasing
Rinse Hold
Spin speed reduction
No Spin
Cottons905150 501.70 ••••••
Cottons 60**5140 470.95 ••••••
Cottons 405125 470.65 ••••••
Intensive 605160 551.00 ••••
Babycare 655170 601.00 *•••
Synthetics 602.5115 500.95 ••••••
Synthetics 402.5105 500.55 ••••••
Mix 403.5 95450.50 ••••••
Delicate 40270 550.35 •••••
Woollens 401.5 55500.30 ••••
Hand wash 30140 350.15 ••
Mini 302.5 30450.25 •• • : Selectable
* : Automatically selected, not cancel-
lable.
**: Energy Label programme (EN 60456)
Water and power consumption and 
program duration may differ from the 
table subject to changes in water pres-
sure, water hardness and temperature, 
ambient temperature, type and amount 
of laundry, selection of auxiliary functions, 
and changes in electric voltage.
C The auxiliary functions in the table 
may differ according to the model of your 
machine.
 
						

							15
Pressing “On/Off”
By pressing “On/Off” button you can make your machine 
ready for selecting program. When “On/Off” key is pressed 
“door” led will light on meaning “door can open”. Press 
“On/Off” key again for turning your machine off. 
Pressing “On/Off” does not mean program started opera-
tion. You must press “Start/Pause/Cancel” for starting the 
program. 
Child-proof lock
During washing laundry in order to maintain that program 
progress is not affected by pressing keys by children there 
is child-proof lock. To enable child-proof lock, after wash-
ing begins, press Express and Rinse Plus function buttons 
together simultaneously for three seconds. Pre-wash ad-
ditional function led will always blink. 
After program ends in order to start a new program or alter 
the program you have to disable child-proof lock. To do 
this press same buttons for three seconds and Child-proof 
lock led will be off.
Function Selection
Additional functions selectable according to selected 
program can be selected by pressing related key. Led of 
selected function will be on.
If not selected together some additional functions go off 
when it is not selected with other one. For example; when 
using cotton program, exspress and rinse plus auxillary 
functions can not be selected together. After selecting 
express program, if rinse plus key is pressed fast program 
will be on and express function led will go off.
Program Progress
After machine starts operation relevant program led on 
program progress display will be on. When a step is com-
pleted that step’s led is off and next step’s led is on. When 
“On/Off button is pressed “door” led will be on. After wash-
ing program is selected when “Start/Pause/Cancel” key is 
pressed “Washing” led on program progress display will be 
on. At the final step “Spin cycle” led is on. When program 
 
						

							16
is completed “Ready” led will be on again. 
During machine operation you can press “Start/Pause/
Cancel” key for getting machine to “Pause” position. In this 
case “Start/Pause/Cancel” led will blink. 
Changing Program 
You can use this feature for washing laundry in the same 
textile group for washing at lower or higher temperatures. 
For example, instead of Cotton60, Cotton40 can be used. 
For selecting Cotton40 instead of Cotton60 by pressing 
“Start/Pause/Cancel” key machine is switched to pause 
position. Program knob is turned for selecting Cotton40 
program. 
Even when the program selection button is changed during 
the program initially selected program will be executed. For 
changing washing program continuing program must be 
cancelled. (See Cancelling a program)
For selecting auxillary functions or spin speed necessary 
changes can be performed after pressing Start/Pause/
Cancel button. Although selected auxillary functions must 
be compatible with washing program. For example when 
your machine is intensive program you can select additional 
rinse plus function but you can not select express.
Adding laundry
If you want to add laundry to your machine after program 
begins press Start/Pause key for switching machine to 
pause mode. If water level in the machine is appropriate “door” led on program progress display is on and laundry 
can be added to the machine. If “door” led is not on after 
one minute than water level in the machine is not appropri-
ate and laundry can not be added. You can press “Start/
Pause/Cancel” key for continuing program. 
Time delay for program start
Using time delay key you can delay the starting of the se-
lected program for 3 hours, 6 hours or 9 hours. 
When time delay key is pressed once 3hours delay is 
adjusted and led will light on. If same key is pressed once 
more delay is 6hours, and if it is pressed once more 9 
hours delay is selected. If time delay key is pressed again 
delay is cancelled. After the selection of time delay when 
“Start/Pause/Cancel” is pressed program can be started 
with delay. During delay period door can be opened or 
laundry can be added 
After time delay is initiated by pressing “Start/Pause/Can-
cel” you can switch machine to “Pause” mode and change 
delay time. 
 
						

							17
Canceling a Program 
For canceling a program “Start/Pause/Cancel”  key is 
pressed for three seconds. After this period “Start/Pause/
Cancel”  and all other leds will be off .You can select a new 
program and start washing.
If cancel task is performed during washing “Spin” led on 
display will light on, machine will pump and when “Spin” led 
is off “door” led will be on, door can be opened and new 
program can be selected. 
Even program selection button is changed during the 
program initially selected program will be executed. For 
changing washing program “Canceling a program” must be 
performed afterwards new program can be selected and 
started 
After machine starts operation even if spin speed or wash-
ing temperature is changed, initial speed and temperature 
is valid. In order to change spin speed or temperature after 
pressing “Start/Pause/Cancel”  new cycle or temperature 
can be selected. 
End of Program
When program ends “ door” led will light on and door can 
be opened and machine is ready for next washing. Press 
“On/Off” for turning machine off. 
Emptying Laundry 
After program ends machine automatically stops. Turn off 
tap water. Pull the handle and open loading door. Turn off 
your machine by pressing “On/Off”. After taking laundry 
out keep the loading door open and let the drum ventilate. 
Check the bellow and clean. 
 
						

							18
Detergent Dispenser
Powder detergent residue may accumulate in drawer 
after a while. In order to clean detergent drawer press the 
marked point of the siphon on softener compartment and 
push the drawer towards yourself. Wash the drawer with 
water 
Siphon
Do not neglect cleaning suction cup when it becomes 
soiled. In order take suction cup out first take detergent 
drawer out. Clean it in order to eliminate blocking by soft-
ener residue. After cleaning place suction cup to its place 
and make sure it is placed properly. 
Water Entrance Filters
There is a filter at each flat end where water inlet hose is 
connected to tap and at each of water inlet valve placed 
behind the machine. These filters blocks entrance of 
foreign objects and dirts to the machine. Filters must be cleaned regularly to avoid clogging. For doing this, turn off 
tap water. Pull out water inlet hoses. Clean the top of the 
water inlet valve filter with a brush. If filters are extremely 
clogged you can pull it out with a pincer. You can take out 
the flat side of water inlet hoses with its seal and clean with 
tap water. (2 filters in Single water inlet machines, 4 filters 
in double water inlet machines)
Hose
There is risk of freezing in cold region, if your machine is 
placed in a cold place remaining water in hoses must be 
drained with pump filter when machine is not used. Water 
inlet hoses can be drained by taking it out from tap. 
5Care and maintanence
 
						

							19
Cleaning Pump Filter 
There is filter system maintaning long lifetime of pump by 
blocking foreign objects like button, cloth fiber enter to the 
pump during drain of washing water. It is useful to clean 
the filter when it is soiled. 
In order to do this:
Unplug your machine. Open the filter at bottom right cor-
ner by pressing marked space on the lid.
Hot water risk: There might be 15 lt., 90°C hot water in the 
drum. Open the filter carefully.
Before opening the filter drain the water with drain hose. 
Pull out the drain hose from its place. Prepare a suitable 
container and open the tap of hose. After water is drained 
place the tap properly. Open the filter by turning and drain the remaining water (max30ml) to filter tap.  Clean remain-
ing foreign object in the filter. When finished turn in clock-
wise direction and close. Close the filter tap by pushing.
Caution!
If the filter and hose tap does not fit, it leaks water.
 
						

							20
      Installation
If your system is not ready, let a certified plumber make it 
ready.  
1.  Removing the transportation safety bolts
Before the washing machine is operated, the transit bars 
must be removed! In order to do this:
1. Loosen “C” bolts by rotating them counter clockwise 
with a suitable spanner 
2. Remove transportation safety bolts by turning. 
3. Place “P” plastic covers onto the openings of transpor-
tation locks by rotating in direction of arrow and pushing. 
Attention please! Keep the transit bars for using when 
machine is to be transported again. Always transport your 
machine with transportation locks. 
2. Leveling the feet
In order to operate your machine without noise and vibra-
tion it must be properly on balance. Four feet of your ma-
chine can be adjusted. First loosen the plastic counter bolt. 
Tighten the counter bolt after adjusting the feet for leveling 
your machine.
3. Water Connections 
a) Water Inlet Hose 
Your machine is connected to water supply by special 
hoses supplied by the machine. Red hose or hose 
written red on it is hot water inlet, blue hose or hose 
written blue on it is cold water inlet.
There are plastic seals (4 for double water inlet mod-
els, 2 for single water inlet models) on hose or plastic 
bag for eliminating any leakage in connections points. 
These seals must be used on each side of the connec-
6