BEKO WMB 51041 User Manual
Have a look at the manual BEKO WMB 51041 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 187 Beko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Washing Machine Plně automatická pračka Automatická pračka Pralka automatycznaWMB 51241 PT WMB 51041 PT
2 - EN 1 Warnings General Safety• Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorized Service for repair. • Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned. • Your washing machine is designed to continue operating when the power restores after a power interruption. The machine will resume its program when the power restores. Press the “Start/Pause/Cancel” button for 3 seconds to cancel the program (See, Canceling a Program) • There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine. • Some problems you may encounter may be caused by the infrastructure. Press “Start/ Pause/Cancel” button for 3 seconds to cancel the program set in your machine before calling the authorized service. First Use• Carry out your first washing process without loading your machine and with detergent under “Cottons 90°C” program. • Ensure that the cold and hot water connections are made correctly when installing your machine. • If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker. • While using with or without a transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding. • Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives. Intended use• This product has been designed for home use. • The appliance may only be used for washing and rinsing of textiles that are marked accordingly. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Safety instructions• This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. • The supply and draining hoses must always be securely fastened and remain in an undamaged state. • Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! • Never open the loading door or remove the filter while there is still water in the drum. • Unplug the machine when it is not in use. • Never wash down the appliance with a water hose! There is the risk of electric shock! • Never touch the plug with wet hands. Do not operate the machine if the power cord or plug is damaged. • For malfunctions that cannot be solved by information in the operating manual: • Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent. You may refer to your local agent or solid waste collection center in your municipality to learn how to dispose of your machine. If there are children in your house...• Keep children away from the machine when it is operating. Do not let them tamper with the machine. • Close the loading door when you leave the area where the machine is located. 2 Installation Removing packaging reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all the bolts with a spanner until they rotate freely (“C”) 2. Remove transportation safety bolts by turning them gently. 3. Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)
3 - EN C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future. C Never move the appliance without the transportation safety bolts properly fixed in place! Adjusting the feet A Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged. 1. Manually (by hand) loosen the lock nuts on the feet. 2. Adjust them until the machine stands level and firmly. 3. Important: Tighten all lock nuts up again. Connecting to the water supply.Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1 MPa). • Connect the special hoses supplied with the machine to the water intake valves on the machine. • If you are going to use your double water-inlet machine as a single (cold) water-inlet unit, you must install the stopper*, supplied with your machine to the hot water valve. • If you want to use both water inlets of the product, you can connect the hot water hose after removing the stopper and gasket group from the hot water valve. * Applies for the products supplied with a blind stopper group. • Models with a single water inlet should not be connected to the hot water tap. When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses. Connecting to the drainThe water discharge hose can be attached to the edge of a washbasin or bathtub. The drain hose should be firmly fitted into the drain as to not get out of its housing. Important: • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. • The hose should be attached to a height of at least 40 cm, and 100 cm at most. • In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out wet. • The hose should be pushed into the drainage for more than 15 cm. If it is too long you may have it shortened. • The maximum length of the combined hoses must not be longer than 3.2 m. Electrical connectionConnect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations. • The voltage and the allowed fuse protection are specified in the section “Technical Specifications”. • The specified voltage must be equal to your mains voltage. • Connection via extension cords or multi-plugs should not be made. B A damaged power cable must be replaced by a qualified electrician. B The appliance must not be operated unless it is repaired! There is the risk of electric shock!
4 - EN 3 Initial preparations for washing Preparing clothes for washingLaundry items with metal attachments such as, bras, belt buckles and metal buttons will damage the machine. Remove metal attachments or place the items in a clothing bag, pillow case, or something similar. • Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. • Place small items like infants’ socks and nylon stockings, etc. in a laundry bag, pillow case or something similar. This will also save your laundry from getting lost. • Wash “machine washable” or “hand washable” labeled products only with an appropriate program. • Do not wash colors and whites together. New, dark colored cottons may release a lot of dye. Wash them separately. • Use only dyes/color changers and lime removers suitable for machine wash. Always follow the instructions on the packaging. • Wash trousers and delicate clothes turned inside out. Correct load capacity C Please follow the information in the "Program Selection Table". Washing results will degrade when the machine is overloaded. Loading doorThe door locks during program operation and the Door Locked Symbol lights up. The door can be opened when the symbol fades out. Detergents and softenersDetergent Drawer The detergent dra wer is composed of three compartments: The detergent dispenser may be in two different types according to the model of your machine. – (I) for prewash – (II) for main wash - (III) siphon – ( ) for softener Detergent, softener and other cleaning agents Add detergent and softener before starting the washing program. Never open the detergent dispenser drawer while the washing program is running! When using a program without pre-wash, no detergent should be put into the pre-wash compartment (Compartment no. I). Detergent quantity The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness. • Do not use amounts exceeding the quantities recommended on the package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection. • Never exceed the (> max
5 - EN Display symbols a - Spin Symbol b - Spin Speed Indicator c – Water cut-off symbol (According to your machine’s model) d - Economy Symbol e - Temperature Indicator f - Temperature Symbol g - Door Locked Symbol h - Standby Symbol i - Start Symbol j - Auxiliary Function Symbols k - Remaining Time and Delaying Time Indicator l - Program Indicator Symbols (pre-wash/main wash/rinse/softener/spin) m - Time Delaying Symbol F1F2F3F4 a b c de f g h i j k l m Turning the machine on Plug in your machine. Turn the tap on completely. Check if the hoses are connected tightly. Place the laundry in the machine. Add detergent and softener. Press the “On/Off” button. Program selection Select the appropriate program from the program table according to type, amount and degree of soiling of the laundry and washing temperatures. Turn the Program Selection Knob to the program mode that you wish to wash your laundry. The recommended temperature and spin speed for the selected program appear. Press "Start/ Pause/Cancel" button to start the program. Main programs Depending on the type of textile, the following main programs are available: • Cottons You can wash your durable clothes with this program. Your laundry will be washed with vigorous washing movements during a longer washing cycle. It is recommended for your cotton items (such as bed sheets, duvet and pillowcase sets, bathrobes, underclothing, etc.). • Synthetics You can wash your less durable clothes on this program. Gentler washing movements and a shorter washing cycle is used compared to the “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, 4 Selecting a Program and Operating Your Machine 1 - Spin Speed Adjustment Button 2 - Display 3 - Temperature Adjustment Button 4 - Program Selection Knob 5 - On/Off Button 6 - Time Delaying Button (+/-) 7 - Auxiliary Function Buttons 8 - Start/Pause/Cancel Button 1 6 78 2 3 45 Control panel
6 - EN synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended. Detergent should not be put in the pre-wash compartment. Less detergent should be put in the main wash compartment as loose knit fabrics (lace) foam too much due to its meshed structure. • Woollens You can wash your machine-washable woolen garments on this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. Additional programs For special cases, there are also extra programs available: C Additional programs may differ according to the model of your machine. • Cotton Economic You may wash your laundry to be washed in cottons program in longer periods which ensure very good washing performance. C Cottons economy program consumes less energy compared to other cottons programs. • Babycare Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people. • Hand wash You can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes. • Daily express You can use this program to quickly wash a small number of lightly soiled and unstained cotton garments. E.g.: bathrobes, duvet covers, sport wear, daily clothes and etc. used only once. • Express 14 You can use this program to quickly wash a small number of lightly soiled and unstained cotton garments. E.g.: bathrobes, duvet covers, sport wear, daily clothes and etc. used only once. • Darkcare Use this programme to wash your dark coloured laundry, or the coloured laundry that you do not want them get faded. This programme washes your laundry with low mechanical movements and at low temperature. We recommend you to use liquid detergent or woolen shampoo for dark coloured laundry. • Mix You can use this program to wash cottons and synthetics together. There is no need to sort them. • Shirts You can use this program to wash the shirts made of cotton, synthetic and synthetic blended fabrics. • Freshen Up You can use “Refreshing” program to remove odors from laundry that are used only for once and do not have any spots or dirt on them. • Eco clean 20 (Eco Clean) You can use this program, which is more sensitive to environment and natural resources, to wash lightly soiled and unspotted cotton laundry (max 3.5 kg) in a short time and economical way. It is suggested to use liquid or gel washing detergents. • Self Clean It is suggested to run this program with certain intervals (e.g. once in 1 or 2 months) for the self-cleaning of your machine. This program must certainly be run without any laundry in the machine. Make sure that the machine is empty before starting the program. For more effective cleaning, you can run the program by adding powder lime remover for washing machines into compartment II of the detergent drawer. After the program is completed, leave the door ajar to allow the inside of the machine get dry. C This is not a program for washing laundry. This is a maintenance program for the machine. C Never use this program if there is something in your machine. C When this feature is started your machine senses the load inside of it automatically, if any, and interrupts the program. Economy Symbol Shows energy saving programs and temperature selections. As "Intensive" and "Hygiene" programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up. Special programs For specific applications, select any of the following programs: • Rinse This program is used when you want to rinse or starch separately. • Spin + Drain This program spins with maximum possible rpm in the default setting after the water drains from the machine. C Use a lower spin speed for delicate laundries. Temperature selection Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator. To change the temperature, press the temperature button. Temperature decreases in 10° increments. Cold selection is shown with “-” symbol.
7 - EN 90˚C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets) 60˚C Normally soiled, fade proof colored linens, cottons or synthetic clothes (Ex.: shirts, nightgowns, pajamas) and lightly soiled white linen clothes (Ex.: underwear) 40˚C 30˚C Cold Blended clothes including synthetics and woolens as well as delicates. Spin Speed selection Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator. To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively. Rinse hold is shown with “ ” and no spin is shown with “ ” symbols. If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes become wrinkled when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function: - Adjust the spin speed. - Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the program.
8 - EN Program and consumption table • : Selectable * : Automatically selected, not cancellable. ** : Energy Label program (EN 60456) *** If maximum spin speed of your machine is lower, selection may be made until maximum spin speed. - : See program description for maximum load. C The auxiliary functions in the table vary according to the model of your machine. C Water and power consumption and program duration differ from the table subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and changes in supply voltage. C Program duration will be displayed on the screen of your machine according to your selection. EN 2 Auxiliary functions Programme (°C) Max. Load (kg) Water Consumption (l) Energy Consumption (kWh) Max. Speed*** Prewash Quick Wash Rinse Plus Anti-Creasing Rinse Hold Pet hair removal Selectable temperature range °C Cottons 90555 1.90 1600 •••••• 90-Cold Cottons 60553 1.35 1600 •••••• 90-Cold Cottons 40553 0.70 1600 •••••• 90-Cold Babycare 90540 1.80 1600 *• 90-30 Cotton Economic 60**545 0.85 1600 •••••• 60-Cold Cotton Economic 40550 0.60 1600 •••••• 60-Cold Synthetics 602.5 400.90 1000 •••••• 60-Cold Synthetics 402.5 650.40 1000 •••••• 60-Cold Eco Clean 203.5 350.16 1600 •20 Mix 40340 0.40 1000 •••••• 40-Cold Shirts 402.5 400.45 800 ••• *• 60-Cold Express 14 30235 0.10 1400 •• 30-Cold Daily Express 90550 1.60 1400 •• 90-Cold Daily Express 60550 1.00 1400 •• 90-Cold Daily Express 30560 0.20 1400 •• 90-Cold Woollens 401.5 400.20 1000 •• 40-Cold Hand wash 30130 0.15 1000 30-Cold Darkcare 402.5 300.40 1000 *• 40-Cold Self Clean 70-80 1.80 800 * 70 Freshen Up -2 20 0.03 1000 •-
9 - EN Auxiliary functionsAuxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. Ex.: If you want to select pre-wash first and then quick wash, pre-wash will be cancelled and quick wash will remain active. Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”) • Prewash When you select this function, the display will indicate "F1" symbol. • A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent and time. • Pre-wash without detergent is recommended for lace and curtains. • Quick Wash With this function, the wash time is shortened. "F2” symbol lights up on the display. • Use this function for smaller amounts or slightly soiled laundries. • Rinse Plus When this function is selected, washing and rinsing is performed with plenty of water. "F3” symbol lights up on the display. • Anti-Creasing With this function, drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. "F4” symbol lights up on the display. • Use this function for delicate laundries that crease easily. C Whenever you select this auxiliary function, load your machine with half of the maximum laundry specified in the program table. • Pet hair removal This function helps you to remove the pet hairs that remain on your clothes. When this function is selected, your machine adds pre-wash and additional rinsing steps to the normal program cycle. Thus, pet hairs are removed more effectively by performing the washing with more water (30%). A Never wash your pets in your washing machine. Time display The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”. Time delay With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes. Open the loading door, place the laundry inside and fill detergent drawer. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. Press “Time delaying” buttons “+” and “-” to set your desired time delay. The Time delaying symbol will flash. Press “Start/ Pause/Cancel” button. Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light up. The “:” in the middle of the displayed time delay will start to flash. • More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol fades and the washing starts as the program duration is displayed. Changing the delay time If you want to change the time during the countdown: Press “Start/Pause/Cancel” button. “ : “ in the middle of the screen will stop flashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade. Press “Time delaying” buttons “+” or “-” to set your desired time delay. Press “Start/Pause/Cancel” button. The Time delaying symbol will light up. The Standby symbol will fade. The Start symbol will light up.The “:” in the middle of the displayed time delay will start to flash. Canceling the time delay If you want to cancel the time delay countdown and start the program immediately: Press “Start/Pause/Cancel” button. The “:” in the middle of the displayed time delay will stop flashing. Start symbol will fade. The standby symbol and the time delaying symbol will flash. Press time delaying button “-” to decrease the desired time delay. Program duration after 30 minutes shall be displayed. Press Start/Pause/ Cancel Button to start the program. Starting the Program Press Start/Pause/Cancel button to start the program. The start symbol which indicates that the program has started will light up. The door locks and the door locked symbol will light up. The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program has started from will light up. Changing the selections after the program has started The selected spin speed and program temperature fade out. An empty frame appears. When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear. Switching the machine to standby mode The machine is switched to standby mode by pressing “Start/Pause/Cancel” button momentarily.
10 - EN The Standby symbol which indicates the machine is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out. Selecting or canceling an auxiliary function in pause mode Auxiliary functions can be cancelled or selected in accordance with the step the program is at. Adding/removing laundry in pause mode The door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door. Door lock The Door Locked Symbol lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out. Child-proof lock Protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program. C Your machine can be turned on and off with On/Off button while the child-proof lock is activated. In this case, your machine will resume its program with child-proof lock activated. The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child-proof lock is activated) label appears on the display. The same symbol will also be displayed whenever any button is pressed while the machine is child- locked. To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec. “C:OFF” (Child-proof lock is deactivated) label appears on the screen. Ending the program through canceling “Start/Pause/Cancel” button is pressed for 3 seconds to cancel the program. Start symbol will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End” will appear on the screen. End of program When the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the start-up of the program will remain selected. “End” will appear on the display. 5 Maintenance and cleaning Detergent DrawerRemove any powder residue buildup in the drawer. To do this; 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. C If more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. 2. Wash the dispenser drawer and the siphon with plenty of lukewarm water in a washbasin. 3. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location. Inlet water filtersThere is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty. • Close the taps. • Remove the nuts of the water intake hoses to clean the surfaces of the filters on the water intake valves with an appropriate brush. • If the filters are very dirty, you can pull them out by means of pliers and clean them. • Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water. • Replace the gaskets and filters carefully to their places and tighten the hose nuts by hand. Draining any remaining water and cleaning the pump filter Your product is equipped with a filter system which ensures a cleaner water discharge that extends