BEKO WMB 51021 User Manual

							Washing Machine
Plně automatická pračka
Automatická pračkaWMB 51221 CS PT
WMB 51021 CS PT
 
						

							2EN
1  Important safety instructions
This section contains safety instructions that 
will help protect from risk of personal injury 
or property damage. Failure to follow these 
instructions shall void any warranty.
General safety
•	 This 	product 	should 	not 	be 	used 	by 	persons	
with physical, sensory or mental disorders 
or unlearned or inexperienced people 
(including children) unless they are attended 
by 	a 	person 	who 	will 	be 	responsible 	for 	their	
safety or who will instruct them accordingly 
for use of the product.
•	 Never 	place 	the 	product 	on 	a 	carpet-
covered floor; otherwise, lack of airflow 
beneath 	the 	machine 	will 	cause 	electrical	
parts 	to 	overheat. 	This 	will 	cause 	problems	
with your product.
•	 Do 	not 	operate 	the 	product 	if 	the 	power	
cable 	/ 	plug 	is 	damaged. 	Call 	the 	Authorized	
Service 	Agent.
•	 Have 	a 	qualified 	electrician 	connect 	a	
16-Ampere 	fuse 	to 	the 	installation 	location 	of	
the product.
•	 If 	the 	product 	has 	a 	failure, 	it 	should 	not	
be 	operated 	unless 	it 	is 	repaired 	by 	the	
Authorized 	Service 	Agent. 	There 	is 	the 	risk 	of	
electric shock!
•	 This 	product 	is 	designed 	to 	resume	
operating in the event of powering on 
after 	a 	power 	interruption. 	If 	you 	wish 	to	
cancel 	the 	programme, 	see 	"Cancelling 	the	
programme" section.
•	 Connect 	the 	product 	to 	a 	grounded 	outlet	
protected 	by 	a 	fuse 	complying 	with 	the	
values in the "Technical specifications" 
table. 	Do 	not 	neglect 	to 	have 	the 	grounding	
installation 	made 	by 	a 	qualified 	electrician.	
Our 	company 	shall 	not 	be 	liable 	for 	any	
damages that will arise when the product is 
used without grounding in accordance with 
the local regulations.
•	 The 	water 	supply 	and 	draining 	hoses	
must 	be 	securely 	fastened 	and 	remain	
undamaged. Otherwise, there is the risk of 
water leakage.
•	 Never 	open 	the 	loading 	door 	or 	remove 	the	
filter while there is still water in the drum. 
Otherwise, risk of flooding and injury from 
hot water will occur.
•	 Do 	not 	force 	open 	the 	locked 	loading 	door.	
The 	loading 	door 	will 	be 	ready 	to 	open 	just 	a	
few minutes after the washing cycle comes 
to 	an 	end. 	In 	case 	of 	forcing 	the 	loading 	door	
to open, the door and the lock mechanism 
may get damaged.
•	 Unplug 	the 	product 	when 	not 	in 	use.
•	 Never 	wash 	the 	product 	by 	spreading 	or	
pouring water onto it! There is the risk of  electric shock!
•	 Never 	touch 	the 	plug 	with 	wet 	hands! 	Never	
unplug 	by 	pulling 	on 	the 	cable, 	always 	pull	
out 	by 	grabbing 	the 	plug.
•	 Use 	detergents, 	softeners 	and 	supplements	
suitable 	for 	washing 	machines 	only.
•	 Follow 	the 	instructions 	on 	the 	textile 	tags	
and on the detergent package.
•	 The 	product 	must 	be 	unplugged 	during	
installation, maintenance, cleaning and 
repairing procedures.
•	 Always 	have 	the 	installation 	and 	repairing	
procedures 	carried 	out 	by 	the 	Authorized	
Service 	Agent. 	Manufacturer 	shall 	not 	be	
held 	liable 	for 	damages 	that 	may 	arise 	from	
procedures 	carried 	out 	by 	unauthorized	
persons.
Intended use
•	 This 	product 	has 	been 	designed 	for	
domestic 	use. 	It 	is 	not 	suitable 	for	
commercial 	use 	and 	it 	must 	not 	be 	used 	out	
of its intended use.
•	 The 	product 	must 	only 	be 	used 	for 	washing	
and rinsing of laundry that are marked 
accordingly.
•	 The 	manufacturer 	waives 	any 	responsibility	
arisen from incorrect usage or transportation.
Children's safety
•	 Electrical 	products 	are 	dangerous 	for 	the	
children. Keep children away from the 
product 	when 	it 	is 	in 	use. 	Do 	not 	let 	them	
to 	tamper 	with 	the 	product. 	Use 	child 	lock	
to prevent children from intervening with the 
product. 
•	 Do 	not 	forget 	to 	close 	the 	loading 	door	
when leaving the room where the product is 
located.
•	 Store 	all 	detergents 	and 	additives 	in 	a 	safe	
place away from the reach of the children.
  
						

							3EN
2  Installation
Refer 	to 	the 	nearest 	Authorised 	Service 	Agent 	for	
installation of the product. To make the product 
ready for use, review the information in the 
user manual and make sure that the electricity, 
tap water supply and water drainage systems 
are 	appropriate 	before 	calling 	the 	Authorized	
Service 	Agent. 	If 	they 	are 	not, 	call 	a 	qualified	
technician 	and 	plumber 	to 	have 	any 	necessary	
arrangements carried out.
C  Preparation of the location and electrical, 
tap water and waste water installations at 
the place of installation is under customer's 
responsibility.	
B	 Installation 	and 	electrical 	connections 	of	
the 	product 	must 	be 	carried 	out 	by 	the	
Authorized 	Service 	Agent. 	Manufacturer 	shall	
not 	be 	held 	liable 	for 	damages 	that 	may 	arise	
from 	procedures 	carried 	out 	by 	unauthorized	
persons.
A  Prior to installation, visually check if the 
product 	has 	any 	defects 	on 	it. 	If 	so, 	do 	not	
have 	it 	installed. 	Damaged 	products 	cause	
risks for your safety.
C	 Make 	sure 	that 	the 	water 	inlet 	and 	discharge	
hoses 	as 	well 	as 	the 	power 	cable 	are 	not	
folded, pinched or crushed while pushing 
the product into its place after installation or 
cleaning procedures.
Appropriate installation location
•	 Place 	the 	machine 	on 	a 	rigid 	floor. 	Do 	not	
place it on a long pile rug or similar surfaces.
•	 Total 	weight 	of 	the 	washing 	machine 	and 	the	
dryer 	-with 	full 	load- 	when 	they 	are 	placed	
on top of each other reaches to approx. 
180 kilograms. Place the product on a solid 
and flat floor that has sufficient load carrying 
capacity!
•	 Do 	not 	place 	the 	product 	on 	the 	power	
cable.
•	 Do 	not 	install 	the 	product 	at 	places 	where	
temperature 	may 	fall 	below 	0ºC.
•	 Place 	the 	product 	at 	least 	1 	cm 	away 	from	
the edges of other furniture.
Removing packaging reinforcement
Tilt 	the 	machine 	backwards 	to 	remove 	the	
packaging reinforcement. Remove the packaging 
reinforcement 	by 	pulling 	the 	ribbon.
Removing the transportation locks
A	 Do 	not 	remove 	the 	transportation	
locks 	before 	taking 	out 	the 	packaging	
reinforcement.
A	 Remove 	the 	transportation 	safety 	bolts	
before 	operating 	the 	washing 	machine,	
otherwise, 	the 	product 	will 	be 	damaged.
1.	 Loosen 	all 	the 	bolts 	with 	a 	spanner 	until 	they	
rotate freely. 2.	 Remove
	transportation 	safety 	bolts 	by	
turning them gently.
3.	 Attach 	the 	covers 	supplied 	in 	the 	User	
Manual 	bag 	into 	the 	holes 	on 	the 	rear 	panel.
C	 Keep 	the 	transportation 	safety 	bolts 	in 	a 	safe	
place to reuse when the washing machine 
needs 	to 	be 	moved 	again 	in 	the 	future.
C  Never move the product without the 
transportation 	safety 	bolts 	properly 	fixed 	in	
place!
Connecting water supply
C	 The 	water 	supply 	pressure 	required 	to 	run	
the 	product 	is 	between 	1 	to 	10 	bars 	(0.1 	– 	1	
MPa). 	It 	is 	necessary 	to 	have 	10 	– 	80 	liters 	of	
water flowing from the fully open tap in one 
minute to have your machine run smoothly. 
Attach 	a 	pressure 	reducing 	valve 	if 	water	
pressure is higher.
C	 If 	you 	are 	going 	to 	use 	the 	double 	water-inlet	
product 	as 	a 	single 	(cold) 	water-inlet 	unit,	
you must install the supplied stopper to the 
hot 	water 	valve 	before 	operating 	the 	product.	
(Applies 	for 	the 	products 	supplied 	with 	a	
blind 	stopper 	group.)
C	 If 	you 	want 	to 	use 	both 	water 	inlets 	of 	the	
product, connect the hot water hose after 
removing the stopper and gasket group from 
the 	hot 	water 	valve. 	(Applies 	for 	the 	products	
supplied 	with 	a 	blind 	stopper 	group.)
A	 Models 	with 	a 	single 	water 	inlet 	should 	not	
be 	connected 	to 	the 	hot 	water 	tap. 	In 	such	
a case the laundry will get damaged or the 
product will switch to protection mode and 
will not operate.
A	 Do 	not 	use 	old 	or 	used 	water 	inlet 	hoses	
on 	the 	new 	product. 	It 	may 	cause 	stains 	on	
your laundry.
1.	 Connect 	the 	special 	hoses 	supplied 	with 	the	
product to the water inlets on the product. 
Red 	hose 	(left) 	(max. 	90 	ºC) 	is 	for 	hot 	water	
inlet, 	blue 	hose 	(right) 	(max. 	25 	ºC) 	is 	for 	cold	
water inlet.
A  Ensure that the cold and hot water 
connections are made correctly when 
installing the product. Otherwise, your 
laundry will come out hot at the end of the 
washing process and wear out.
  
						

							4EN
2.	 Tighten	all 	hose 	nuts 	by 	hand. 	Never 	use 	a	
wrench when tightening the nuts.
3.   Open the taps completely after making 
the hose connection to check for water 
leaks 	at 	the 	connection 	points. 	If 	any 	leaks	
occur, turn off the tap and remove the nut. 
Retighten the nut carefully after checking 
the seal. To prevent water leakages and 
damages 	caused 	by 	them, 	keep 	the 	taps	
closed when the machine is not in use.
Connecting to the drain
•	 The 	end 	of 	the 	drain 	hose 	must 	be 	directly	
connected to the wastewater drain or to the 
washbasin.	
A	 Your 	house 	will 	be 	flooded 	if 	the 	hose 	comes	
out of its housing during water discharge. 
Moreover, 	there 	is 	risk 	of 	scalding 	due 	to	
high washing temperatures! To prevent such 
situations and to ensure smooth water intake 
and discharge of the machine, fix the end of 
the discharge hose tightly so that it cannot 
come out. 
•	 The 	hose 	should 	be 	attached 	to 	a 	height 	of	
at least 40 cm, and 100 cm at most.
•	 In 	case 	the 	hose 	is 	elevated 	after 	laying 	it	
on the floor level or close to the ground 
(less 	than 	40 	cm 	above 	the 	ground), 	water	
discharge 	becomes 	more 	difficult 	and 	the	
laundry may come out excessively wet. 
Therefore, 	follow 	the 	heights 	described 	in 	the	
figure.
•	 To 	prevent 	flowing 	of 	dirty 	water 	back 	into	
the machine and to allow for easy discharge, 
do not immerse the hose end into the dirty 
water 	or 	drive 	it 	in 	the 	drain 	more 	than 	15	
cm. 	If 	it 	is 	too 	long, 	cut 	it 	short.
•	 The 	end 	of 	the 	hose 	should 	not 	be 	bent,	
it 	should 	not 	be 	stepped 	on 	and 	the 	hose	
must 	not 	be 	pinched 	between 	the 	drain 	and	
the machine.
•	 If 	the 	length 	of 	the 	hose 	is 	too 	short, 	use 	it	
by 	adding 	an 	original 	extension 	hose. 	Length	
of 	the 	hose 	may 	not 	be 	longer 	than 	3.2 	m.	
To avoid water leak failures, the connection 
between 	the 	extension 	hose 	and 	the 	drain	
hose 	of 	the 	product 	must 	be 	fitted 	well 	with	 an appropriate clamp as not to come off and 
leak.
Adjusting the feet
A	 In
	order 	to 	ensure 	that 	the 	product 	operates	
more 	silent 	and 	vibration-free, 	it 	must 	stand	
level 	and 	balanced 	on 	its 	feet. 		Balance 	the	
machine 	by 	adjusting 	the 	feet. 	Otherwise,	
the product may move from its place and 
cause 	crushing 	and 	vibration 	problems.
1.	 Loosen 	the 	lock 	nuts 	on 	the 	feet 	by 	hand.
2.	 Adjust 	the 	feet 	until 	the 	product 	stands 	level	
and 	balanced.
3.	 Tighten 	all 	lock 	nuts 	again 	by 	hand.
A	 Do 	not 	use 	any 	tools 	to 	loosen 	the 	lock 	nuts.	
Otherwise, they will get damaged.
Electrical connection
Connect 	the 	product 	to 	a 	grounded 	outlet	
protected 	by 	a 	fuse 	complying 	with 	the 	values 	in	
the 	"Technical 	specifications" 	table. 	Our 	company	
shall 	not 	be 	liable 	for 	any 	damages 	that 	will 	arise	
when the product is used without grounding in 
accordance with the local regulations.
•	 Connection 	must 	comply 	with 	national	
regulations.
•	 The 	voltage 	and 	allowed 	fuse 	or 	breaker	
protection are specified in the “Technical 
specifications” 	section. 	If 	the 	current 	value 	of	
the 	fuse 	or 	breaker 	in 	the 	house 	is 	less 	than	
16 	Amps, 	have 	a 	qualified 	electrician 	install 	a	
16 	Amp 	fuse.
•	 The 	specified 	voltage 	must 	be 	equal 	to 	your	
mains voltage.
•	 Do 	not 	make 	connections 	via 	extension	
cables 	or 	multi-plugs.
B	 Damaged 	power 	cables 	must 	be 	replaced	
by 	the 	Authorized 	Service 	Agents.
First use
Before 	starting 	to 	use 	the 	product, 	make 	sure	
that all preparations are made in accordance 
with 	the 	instructions 	in 	sections 	"Important 	safety	
instructions" 	and 	"Installation".
To prepare the product for washing laundry, 
perform 	first 	operation 	in 	Drum 	Cleaning	
   
						

							5EN
programme.	If 	your 	machine 	is 	not 	featured 	with	
Drum 	Cleaning 	programme, 	use 	Cottons-90	
programme 	and 	select 	Additional 	Water 	or 	Extra	
Rinse 	auxiliary 	functions 	as 	well. 	Before 	starting	
the programme, put max. 100 g of powder 
anti-limescale 	into 	the 	main 	wash 	detergent	
compartment 	(compartment 	nr. 	II). 	If 	the 	anti-
limescale 	is 	in 	tablet 	form, 	put 	only 	one 	tablet 	into	
compartment 	nr. 	II. 	Dry 	the 	inside 	of 	the 	bellow	
with a clean piece of cloth after the programme 
has come to an end. 
C	 Use 	an 	anti-limescale 	suitable 	for 	the	
washing machines.
C  Some water might have remained in the 
product 	due 	to 	the 	quality 	control 	processes	
in 	the 	production. 	It 	is 	not 	harmful 	for 	the	
product.
Disposing of packaging material
Packaging materials are dangerous to children. 
Keep packaging materials in a safe place away 
from reach of the children.
Packaging materials of the product are 
manufactured 	from 	recyclable 	materials. 	Dispose	
of them properly and sort in accordance with 
recycled 	waste 	instructions. 	Do 	not 	dispose 	of	
them with normal domestic waste.
Transportation of the product
Unplug 	the 	product 	before 	transporting	
it. Remove water drain and water supply 
connections. 	Drain 	the 	remaining 	water 	in 	the	
product 	completely; 	see, 	"Draining 	remaining	
water 	and 	cleaning 	the 	pump 	filter". 	Install	
transportation 	safety 	bolts 	in 	the 	reverse 	order	
of removal procedure; see, "Removing the 
transportation locks".
C  Never move the product without the 
transportation 	safety 	bolts 	properly 	fixed 	in	
place!
3   Preparation
Things to be done for energy saving
Following information will help you use the 
product 	in 	an 	ecological 	and 	energy-efficient	
manner.
•	 Operate 	the 	product 	in 	the 	highest	
capacity 	allowed 	by 	the 	programme 	you	
have 	selected, 	but 	do 	not 	overload; 	see,	
"Programme 	and 	consumption 	table".
•	 Always 	follow 	the 	instructions 	on 	the	
detergent packaging.
•	 Wash 	slightly 	soiled 	laundry 	at 	low	
temperatures.
•	 Use 	faster 	programmes 	for 	small 	quantities	
of lightly soiled laundry.
•	 Do 	not 	use 	prewash 	and 	high 	temperatures	
for laundry that is not heavily soiled or 
stained.
•	 Do 	not 	use 	detergent 	in 	excess 	of 	the	
amount recommended on the detergent 
package.
Sorting the laundry
•	 Sort 	laundry 	according 	to 	type 	of 	fabric,	
colour, 	and 	degree 	of 	soiling 	and 	allowable	
water temperature.
•	 Always 	obey 	the 	instructions 	given 	on 	the	
garment tags.
Preparing laundry for washing
•	 Laundry 	items 	with 	metal 	attachments 	such	
as, 	underwired 	bras, 	belt 	buckles 	or 	metal	
buttons 	will 	damage 	the 	machine. 	Remove	
the 	metal 	pieces 	or 	wash 	the 	clothes 	by	
putting 	them 	in 	a 	laundry 	bag 	or 	pillow 	case.
• 		 Take 	out 	all 	substances 	in 	the 	pockets 	such	
as coins, pens and paper clips, and turn 
pockets 	inside 	out 	and 	brush. 	Such 	objects	
may damage the product or cause noise 
problem.
•	 Put 	small 	size 	clothes 	such 	as 	infant's 	socks	
and 	nylon 	stockings 	in 	a 	laundry 	bag 	or	
pillow case.
•	 Place 	curtains 	in 	without 	compressing 	them.	
Remove curtain attachment items.
•	 Fasten 	zippers, 	sew 	loose 	buttons 	and	
mend rips and tears.
•	 Wash 	“machine 	washable” 	or 	“hand	
washable” 	labeled 	products 	only 	with 	an	
appropriate programme.
•	 Do 	not 	wash 	colours 	and 	whites 	together.	
New, dark coloured cottons release a lot of 
dye. 	Wash 	them 	separately.
•	 Use 	only 	dyes/colour 	changers 	and	
limescale 	removers 	suitable 	for 	machine	
wash. 	Always 	follow 	the 	instructions 	on 	the	
package.
•	 Laundry 	that 	are 	subjected 	to 	materials 	such	
as flour, lime dust, milk powder, etc. intensely 
  
						

							6EN
must	be 	shaken 	off 	before 	placing 	into 	the	
machine. Such dusts and powders on the 
laundry 	may 	build 	up 	on 	the 	inner 	parts 	of 	the	
machine in time and can cause damage.
Correct load capacity
The maximum load capacity depends on the type 
of laundry, the degree of soiling and the washing 
programme desired.
The machine automatically adjusts the amount 
of water according to the weight of the loaded 
laundry.
A  Follow the information in the “Programme 
and 	consumption 	table”. 	When 	overloaded,	
machine's washing performance will drop. 
Moreover, 	noise 	and 	vibration 	problems 	may	
occur.
Loading the laundry
•	 Open 	the 	loading 	door.
•	 Place 	laundry 	items 	loosely 	into 	the 	machine.
•	 Push 	the 	loading 	door 	to 	close 	until 	you 	hear	
a locking sound. Ensure that no items are 
caught in the door.
C  The loading door is locked while a 
programme 	is 	running. 	The 	door 	can 	only 	be	
opened a while after the programme comes 
to an end.
A	 In 	case 	of 	misplacing 	the 	laundry, 	noise	
and 	vibration 	problems 	may 	occur 	in 	the	
machine.
Using detergent and softener
Detergent Drawer
The detergent drawer is composed of three 
compartments:
- 	(I) 	for 	prewash
- 	(II) 	for 	main 	wash
– 	() 	for 	softener
– 	(*) 	in 	addition, 	there 	is 	siphon 	piece 	in 	the	
softener compartment.
C  The 	detergent 	dispenser 	may 	be 	in 	two	
different types according to the model of your 
machine 	as 	seen 	above.
Detergent, softener and other cleaning 
agents
•	 Add 	detergent 	and 	softener 	before 	starting	
the washing programme. •	 Never
	open 	the 	detergent 	drawer 	while 	the	
washing programme is running!
•	 When 	using 	a 	programme 	without 	prewash,	
do not put any detergent into the prewash 
compartment 	(compartment 	nr. 	I).	
•	 In 	a 	programme 	with 	prewash, 	do 	not	
put 	liquid 	detergent 	into 	the 	prewash	
compartment 	(compartment 	nr. 	I).
•	 Do 	not 	select 	a 	programme 	with 	prewash 	if	
you 	are 	using 	a 	detergent 	bag 	or 	dispensing	
ball. 	Place 	the 	detergent 	bag 	or 	the	
dispensing 	ball 	directly 	among 	the 	laundry 	in	
the machine.
•	 If 	you 	are 	using 	liquid 	detergent, 	do 	not	
forget 	to 	place 	the 	liquid 	detergent 	cup 	into	
the main wash compartment (compartment 
nr. 	II).
Choosing the detergent type
The 	type 	of 	detergent 	to 	be 	used 	depends 	on 	the	
type 	and 	colour 	of 	the 	fabric.
•	 Use 	different 	detergents 	for 	coloured 	and	
white laundry.
•	 Wash 	your 	delicate 	clothes 	only 	with 	special	
detergents 	(liquid 	detergent, 	wool 	shampoo,	
etc.) used solely for delicate clothes. 
•	 Wash 	woolens 	with 	special 	detergent 	made	
specifically for woolens.
A	 Use 	only 	detergents 	manufactured	
specifically for washing machines.
A	 Do 	not 	use 	soap 	powder.
Adjusting detergent amount
The 	amount 	of 	washing 	detergent 	to 	be 	used	
depends on the amount of laundry, the degree 
of soiling and water hardness. Read the 
manufacturer's instructions on the detergent 
package carefully and follow the dosage values.
•	 Do 	not 	use 	amounts 	exceeding 	the 	dosage	
quantities 	recommended 	on 	the 	detergent	
package 	to 	avoid 	problems 	of 	excessive	
foam, poor rinsing, financial savings and 
finally, environmental protection.
•	 Use 	lesser 	detergent 	for 	small 	amounts 	or	
lightly soiled clothes.
•	 Use 	concentrated 	detergents 	in 	the	
recommended dosage.
Using softeners
Pour the softener into the softener compartment 
of the detergent drawer.
• 		 Use 	the 	dosages 	recommended 	on 	the	
package.
• 		 Do 	not 	exceed 	the 	(>max
						

							7EN
Using liquid detergents
If the product contains a liquid detergent 
cup:
•	 Make	sure 	that 	you 	have 	placed 	the 	liquid	
detergent 	cup 	in 	compartment 	nr. 	"II".
•	 Use 	the 	detergent 	manufacturer's 	measuring	
cup and follow the instructions on the 
package.
• 		 Use 	the 	dosages 	recommended 	on 	the	
package.
• 		 If 	the 	liquid 	detergent 	has 	lost 	its 	fluidity, 	dilute	
it 	with 	water 	before 	putting 	in 	the 	detergent	
cup.
 If the product does not contain a liquid 
detergent cup:
•	 Do 	not 	use 	liquid 	detergent 	for 	the 	prewash	
in a programme with prewash.
•	 Use 	the 	detergent 	manufacturer's 	measuring	
cup and follow the instructions on the 
package.
•	 Liquid 	detergent 	stains 	your 	clothes 	when	
used 	with 	Delayed 	Start 	function. 	If 	you 	are	
going 	to 	use 	the 	Delayed 	Start 	function, 	do	
not 	use 	liquid 	detergent.
Using gel and tablet detergent
When 	using 	tablet, 	gel, 	etc. 	detergents, 	read	
the manufacturer's instructions on the detergent 
package 	carefully 	and 	follow 	the 	dosage 	values. 	If	
there is not any instruction on the package, apply 
the following.
•	 If 	the 	gel 	detergent 	thickness 	is 	fluidal 	and	
your machine does not contain a special 
liquid 	detergent 	cup, 	put 	the 	gel 	detergent	
into the main wash detergent compartment 
during 	first 	water 	intake. 	If 	your 	machine	
contains 	a 	liquid 	detergent 	cup, 	fill 	the	
detergent 	into 	this 	cup 	before 	starting 	the	
programme.
•	 If 	the 	gel 	detergent 	thickness 	is 	not 	fluidal 	or	
in 	the 	shape 	of 	capsule 	liquid 	tablet, 	put 	it	
directly 	into 	the 	drum 	before 	washing.
•	 Put 	tablet 	detergents 	into 	the 	detergent	
compartment 	or 	directly 	into 	the 	drum 	before	
washing.
C	 Tablet 	detergents 	may 	leave 	residues 	in 	the	
detergent 	compartment. 	If 	you 	encounter	
such 	a 	case, 	place 	the 	tablet 	detergent	
between 	the 	laundry, 	close 	to 	the 	lower 	part	
of the drum in future washings.
C	 Use 	the 	tablet 	or 	gel 	detergent 	without	
selecting the prewash function. Using bleaches
•	 Select
	a 	programme 	with 	prewash 	and 	add	
the 	bleaching 	agent 	at 	the 	beginning 	of	
the 	prewash. 	Do 	not 	put 	detergent 	in 	the	
prewash 	compartment. 	As 	an 	alternative	
application, select a programme with extra 
rinse 	and 	add 	the 	bleaching 	agent 	while 	the	
machine is taking water from the detergent 
compartment during first rinsing step.
•	 Do 	not 	use 	bleaching 	agent 	and 	detergent 	by	
mixing them.
•	 Use 	just 	a 	little 	amount 	(approx. 	50 	ml) 	of	
bleaching 	agent 	and 	rinse 	the 	clothes 	very	
well 	as 	it 	causes 	skin 	irritation. 	Do 	not 	pour	
the 	bleaching 	agent 	onto 	the 	clothes 	and 	do	
not use it for coloured clothes. 
•	 When 	using 	oxygen 	based 	bleaches,	
follow the instructions on the package and 
select a programme that washes at a lower 
temperature. 
•	 Oxygen 	based 	bleaches 	can 	be 	used	
together with detergents; however, if its 
thickness is not the same with the detergent, 
put the detergent first into the compartment 
nr. 	"II" 	in 	the 	detergent 	drawer 	and 	wait 	until	
the detergent flows while the machine is 
taking 	in 	water. 	Add 	the 	bleaching 	agent 	from	
the same compartment while the machine is 
still taking in water.
Using limescale remover
• 		 When 	required, 	use 	limescale 	removers	
manufactured specifically for washing 
machines only. 
• 		 Always 	follow 	instructions 	on 	the 	package.
  
						

							8EN
4  Operating the product
Control panel
1	- 	Programme 	Selection 	knob 	(Uppermost	
position 	On/Off)
2 	- 	Programe 	Follow-up 	indicator
3 	- 	Temperature 	Adjustment 	button
4 	- 	Spin 	Speed 	adjustment 	button
1 2
7
6
5
4
3
5 	- 	Auxiliary 	Function 	buttons
6 	- 	Delayed 	Start 	button 	(in 	some 	models)
7 	- 	Start/Pause 	button
Preparing the machine
Make 	sure 	that 	the 	hoses 	are 	connected 	tightly.	
Plug in your machine. Turn the tap on completely. 
Place 	the 	laundry 	in 	the 	machine. 	Add 	detergent	
and 	fabric 	softener.
Programme selection
Select 	the 	programme 	suitable 	for 	the 	type,	
quantity 	and 	soiling 	degree 	of 	the 	laundry	
in accordance with the "Programme and 
consumption 	table" 	and 	the 	temperature 	table	
below.
90˚C	 Heavily
	soiled 	white 	cottons	
and 	linens. 	(coffee 	table 	covers,	
tableclothes, 	towels, 	bed 	sheets,	
etc.)
60˚C	 Normally soiled, coloured, fade 
proof cottons or synthetic clothes 
(shirt, nightgown, pajamas, etc.) 
and lightly soiled white linens 
(underwear, etc.)
40˚C-
30˚C-	
Cold	 Blended
	laundry 	including	
delicate textile (veil curtains, etc.), 
synthetics and woolens.
Select the desired programme with the 
Programme 	Selection 	button.
C  Programmes are limited with the highest spin 
speed appropriate for that particular type of 
fabric.
C	 When 	selecting 	a 	programme, 	always	
consider 	the 	type 	of 	fabric, 	colour, 	degree 	of	
soiling 	and 	permissible 	water 	temperature.
C	 Always 	select 	the 	lowest 	required	
temperature. 	Higher 	temperature 	means	
higher power consumption.
C  For further programme details, see 
"Programme 	and 	consumption 	table".
Main programmes 
Depending 	on 	the 	type 	of 	fabric, 	use 	the	
following main programmes.
• Bavlna (Cottons)
Use 	this 	programme 	for 	your 	cotton 	laundry	
(such 	as 	bed 	sheets, 	duvet 	and 	pillowcase 	sets,	
towels, 	bathrobes, 	underwear, 	etc.). 	Your 	laundry	
will 	be 	washed 	with 	vigorous 	washing 	action 	for 	a	
longer washing cycle.
• Syntetika (Synthetics)
Use 	this 	programme 	to 	wash 	your 	synthetic	
clothes 	(shirts, 	blouses, 	synthetic/cotton 	blends,	
etc.). 	It 	washes 	with 	a 	gentle 	action 	and 	has 	a	
shorter 	washing 	cycle 	compared 	to 	the 	Cottons	
programme.
  
						

							9EN
For	curtains 	and 	tulle, 	use 	the 	Synthetic 	40˚C	
programme 	with 	prewash 	and 	anti-creasing	
functions 	selected. 	As 	their 	meshed 	texture	
causes 	excessive 	foaming, 	wash 	the 	veils/tulle	
by 	putting 	little 	amount 	of 	detergent 	into 	the 	main	
wash 	compartment. 	Do 	not 	put 	detergent 	in 	the	
prewash compartment.
• Vlna (Woollens)
Use 	this 	programme 	to 	wash 	your 	woolen	
clothes. Select the appropriate temperature 
complying 	with 	the 	tags 	of 	your 	clothes. 	Use	
appropriate detergents for woolens. 
Additional programmes 
For special cases, additional programmes are 
available 	in 	the 	machine.	
C	 Additional 	programmes 	may 	differ 	according	
to the model of the machine.
• Bavlna Eco (Cotton Economic)
Use 	this 	programme 	to 	wash 	your 	laundry	
washable 	in 	cottons 	programme 	for 	a 	longer	
time, still with a very good performance for saving 
purposes.
C	 Cottons 	Eco 	programme 	consumes	
less energy compared to other cottons 
programmes.
• Babycare
Increased 	hygiene 	is 	provided 	by 	a 	longer	
heating 	period 	and 	an 	additional 	rinse 	cycle. 	It 	is	
recommended 	for 	baby 	clothes 	and 	clothes 	worn	
by 	allergic 	people.
• Ruční (Hand wash)
Use 	this 	programme 	to 	wash 	your 	woolen/
delicate 	clothes 	that 	bear 	“not 	machine-	
washable” 	tags 	and 	for 	which 	hand 	wash 	is	
recommended. 	It 	washes 	laundry 	with 	a 	very	
gentle washing action to not to damage clothes.
• Denní praní ( Quick+Daily)
Use 	this 	programme 	to 	quickly 	wash 	your 	lightly	
soiled cotton clothes.
• Tmavé prádlo (Darkcare)
Use 	this 	programme 	to 	wash 	your 	dark 	coloured	
laundry, or the coloured laundry that you do not 
want them get faded. This programme washes 
your laundry with low mechanical movements 
and 	at 	low 	temperature. 	We 	recommend 	you 	to	
use 	liquid 	detergent 	or 	woolen 	shampoo 	for 	dark	
coloured laundry. 
• Mix 40
Use 	this 	programme 	to 	wash 	your 	cotton 	and	
synthetic clothes together without sorting them.
Special programmes
For specific applications, select any of the 
following programmes.
• Máchání (Rinse)
Use 	this 	programme 	when 	you 	want 	to 	rinse 	or	
starch separately. • Odstřeďování + Vypouštění (Spin + Drain)
Use 	this 	programme 	to 	apply 	an 	additional 	spin	
cycle for your laundry or to drain the water in the 
machine.
Before 	selecting 	this 	programme, 	select 	the	
desired 	spin 	speed 	and 	press 	Start/Pause 	button.	
First, the machine will drain the water inside of 
it. Then, it will spin the laundry with the set spin 
speed and drain the water coming out of them.
If 	you 	wish 	to 	drain 	only 	the 	water 	without	
spinning your laundry, select the Pump+Spin 
programme and then select the No Spin function 
with 	the 	help 	of 	Spin 	Speed 	Adjustment 	button.	
Press 	Start 	/ 	Pause 	button.
C	 Use 	a 	lower 	spin 	speed 	for 	delicate 	laundries.
Temperature selection
Whenever 	a 	new 	programme 	is 	selected, 	the	
recommended temperature for the selected 
programme appears on the temperature indicator.
To decrease the temperature, press the 
Temperature 	Adjustment 	button. 	Temperature 	will	
decrease gradually.
C	 If 	the 	programme 	has 	not 	reached	
the heating step, you can change the 
temperature without switching the machine 
to Pause mode.
Spin speed selection
Whenever 	a 	new 	programme 	is 	selected, 	the	
recommended spin speed of the selected 
programme is displayed on the spin speed 
indicator.
To decrease the spin speed, press the Spin 
Speed 	Adjustment 	button. 	Spin 	speed 	decreases	
gradually. Then, depending on the model of the 
product, 	"Rinse 	Hold" 	and 	"No 	Spin" 	options	
appear 	on 	the 	display. 	See 	"Auxiliary 	function	
selection" section for explanations of these 
options.
C	 If 	the 	programme 	has 	not 	reached 	the	
spinning step, you can change the speed 
without switching the machine to Pause 
mode.
  
						

							10EN
Programme and consumption table
•	 Selectable
*	 Automatically	selected, 	no 	canceling.
**	 Energy 	Label 	programme 	(EN 	60456)
***	 If 	maximum 	spin 	speed 	of 	the 	machine 	is 	lower 	then 	this 	value, 	you 	can 	only 	select 	up 	to 	the	
maximum spin speed.
C	 Water 	and 	power 	consumption 	may 	vary 	subject 	to 	the 	changes 	in 	water 	pressure, 	water	
hardness 	and 	temperature, 	ambient 	temperature, 	type 	and 	amount 	of 	laundry, 	selection 	of	
auxiliary functions and spin speed, and changes in electric voltage.
C  You can see the washing time of the programme you have selected on the display of the machine. 
It	is 	normal 	that 	small 	differences 	may 	occur 	between 	the 	time 	shown 	on 	the 	display 	and 	the 	real	
washing time.
C	 The 	auxiliary 	functions 	in 	the 	table 	may 	vary 	according 	to 	the 	model 	of 	your 	machine.
EN
2 Auxiliary	functions
Programme
Max.	Load	(kg)
Programme	Duration	(~min)
Water	Consumption	(l)
Energy	Consumption	(kWh)
Spin speed (rpm)
Prewash
Rychlé praní
Rinse Plus
Anti-Creasing
Rinse	Hold
Soaking
PET program
Temperature
Bavlna 905147 662.25 max•••••• • Cold-90
Bavlna 605118 661.45 max•••••• • Cold-90
Bavlna 40598 66 0.85 max•••••• • Cold-90
Bavlna	Eco 60**5151 470.85 max•••••• • 40-60
Denní	praní 90588 55 1.9 max*** •• Cold-90
Denní	praní 60558 55 1max*** •• Cold-90
Denní	praní 30528 55 0.2 max*** •• Cold-90
Tmavé prádlo 402.5107 580.45 800 *• Cold-40
Mix40 403115 45 0.5 800•••••• • Cold-40
Ruční 30143 30 0.15 600 Cold-30
Vlna 401.5 6040 0.3 600 •• Cold-40
Babycare 905165 85 1.9 max•*•• 30-90
Syntetika 602.5116 45 0.9 800•••••• • Cold-60
Syntetika 402.5106 450.42 800•••••• • Cold-60