Barco Projector Cineversum 80 User Manual

3. OVERVIEW USER’s CONTROLS
3. OVERVIEW USER’S CONTROLS
Overview
 Cine VERSUM Master
 Cine VERSUM 80
 Cine VERSUM 50
 Remote Control
 Remote Control operation
3.1 Cine VERSUM Master
Front View
The front side of theCine VERSUM Master is provided with the following controls:
Image 3-1
Front side Cine VERSUM Master
Controls function description
Ref.FunctionDescription
1Infra Red Reception LED indicatorLights up when a valid Infra Red signal from the Remote Control has
been captured.
2Infra Red...

3. OVERVIEW USER’s CONTROLS
Image 3-2
Cine VERSUM 80 controls
Controls function description
Ref.FunctionDescription
1Infra Red ReceiverReception diode for the IR signals from the Remote Control. Allows
switching On/Off (Standby) of the projector separately and controlling
theCineVERSUMMaster.
2Infra Red Reception LED indicatorLights up when a valid IR signal from the Remote Control has been
captured.
3Standby LEDLights up continuously: projector in the operation mode.
Lights up repeatedly 2 times short,...

3. OVERVIEW USER’s CONTROLS
Image 3-3
Cine VERSUM 50 controls
Controls function description
Ref.FunctionDescription
1Main Power SwitchSwitches the Cine VERSUM 50 in the Standby mode. Operation mode is controlled
by the Cine VERSUM Master.
2Infra Red ReceiverReception diode for the IR signals from the Remote Control to control the Cine
VERSUM Master.
3Standby LEDIndicates the status of the Cine VERSUM 50, lights up in standby and operation
mode.
Ta b l e 3 - 3
3.4 Remote Control
To p s i d e
The Infra Red...

3. OVERVIEW USER’s CONTROLS
Image 3-4
Remote Control
Controls function description
Ref.FunctionDescription
1Address buttonTo match the Remote Control with the unit that you are addressing (number between
0 and 9).
2Standby buttonTo power up/down the Cine VERSUM Master and the displays in the link.
3Digit buttonsAllows to directly select sources.
4RC operation indicationLights up when a button on the remote control is pressed (Visual indication of remote
control operation – Battery check).
5TEXTPress to...

3. OVERVIEW USER’s CONTROLS
Digit ButtonStored source
4
5
6
7
8
3.5 Remote Control operation
Overview
 General
 Battery Insertion in the Remote Control
 Visualization of commands
3.5.1 General
How to use
The Remote Control allows you to control your Cine VERSUM Master, even when it is built into a cabinet. Indeed, the SL/XL cable
allows for 2–way communication. This means you can point the Remote Control to a display unit and still change the settings of the
Cine VERSUM Master.
Image 3-5
Master...

3. OVERVIEW USER’s CONTROLS
Factory address setting of the modules
The factory address setting of the modules is as follows:
ModuleIndividual AddressCommon Address
Cine VERSUM 80address no common address
Cine VERSUM 50address no common address
Cine VERSUM Masteraddress common address 
Common address: is a fixed address, stored in the module. The module will execute the commands sent by
a Remote Control, programmed with thecommon address .
3.5.2 Battery Insertion in the Remote Control
Where to find the...

3. OVERVIEW USER’s CONTROLS
How to reinstall the address
By removing the batteries, the address in the Remote Control will be set to 0. In case the different modules are controlled separately
(own address), the respective address of the module you desire to control has to be set. To reinstall an address, follow procedure
below:
1. Point the Remote Control to the module of which you want to know the address and press the address button (use a pencil).
(image 3-9)
On the screen appears a message box (image...

3. OVERVIEW USER’s CONTROLS
Image 3-14
On-screen message
Image 3-15
Message on Master display
Image 3-16
On-screen bar scale
Image 3-17
Bar scale on Master display
14R5976490 CINE VERSUM SYSTEM 17012003 

4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
Overview
 Brief introduction
 Upon first startup
 Switching the system between OPERATION and STANDBY
 Switching the system between STANDBY and ECONOMIC Standby
 Switching the system OFF completely and BACK to Operation mode
 Turning ON the system from total OFF mode
4.1 Brief introduction
About the handled system in this manual
The Cine VERSUM is a modular system that provides you the possibility to connect more...

4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
Image 4-2
Cine VERSUM 80
Image 4-3
Cine VERSUM Master jog dial
Image 4-4
Power up selection
4.3 Switching the system between OPERATION and STANDBY
Overview
 From OPERATION mode to STANDBY mode
 From STANDBY mode to OPERATION mode
4.3.1 From OPERATION mode to STANDBY mode
Using the Jog dial on the Cine VERSUM Master
1. Press the jog dial once to enter the main menu. (image 4-5)
2. Rotate the jog dial until “Shut down” in the menu is pointed to. (image 4-6)
3....