Barco Projector Cineversum 120 User Manual

							9. Aspect Ratio
9. ASPECT RATIO
9.1 About Aspect Ratios
Overview
Aspect RatioDescription
FitForces format of all input signals into the native panel resolution.
16:9Wide screen television format/Anamorf format.
4:3Standard television format.
5:4Workstations format.
2.35Panavision or Cinemascope format, frequently used by Hollywood films.
1.88Film format used by a lot of non-action films.
1.78Wide screen television format/Anamorf format.
LetterboxForces the letter format of the input signal into the native panel resolution.
Select the desired ASPECT RATIO (depending the image format of the input source) item by pushing the * button on the Remote
Control.
This setting, obtained via the * button will not be saved for later use. Aspect ratios set via the adjustment menus are saved and will
be used again next time an equal source is selected.
Example : input signal 4 by 3 video input coming from off air signal.
R5976667 CINEVERSUM SYSTEM 01102003
37 
						

							9. Aspect Ratio
The following images will be seen on the seen for the different aspect ratios. The black square indicates the maximum projection
area according the DMD inside the projector.
Image 9-1
9.2 Selecting an Aspect Ratio
Steps to be taken
1. Press * button on the remote control to scroll through the possible aspect ratios.
Note:The selected aspect ratio will not be saved when switching to another source.
38
R5976667 CINEVERSUM SYSTEM 01102003 
						

							Index
INDEX
A
Aspect Ratio 37–38
Introduction 37
Selection 38
C
Cine VERSUM System 15
Switching On/Off the system 15
F
First startup 15
I
Image control 23–25
Brightness 23
Color (Saturation) 24
Contrast 23
Tint 25
Introduction 15
On/Off 15
L
Lamp 34–36
Access to the controls 35
Lamp mode 35
Lamp power 36
Lamp actions 31
Lens 31–34
Access to controls 31
Focus adjustment 32
Horizontal shift 32
Vertical shift 33
Zoom 34
Lens actions 31
Location of User controls 8, 10
Remote control operation 10
Location of User’s controls 7
Cine VERSUM 120 7
Cine VERSUM Master 7
O
On/Off 15
Introduction 15
P
Picture in Picture 27–28
Function keys 28
Turning On/Off 27
PiP 28
Function keys 28
Selecting input source 28
PIP 27
Turning On/Off 27
R
Remote control 10–11, 13
Battery insertion 11
General 10
Visualization of commands 13
Return 22
To standby 22
S
Safety instructions 4
Cine VERSUM Master 4
Safety Instructions 3
Cine VERSUM 120 3
General 3
Module related 3
Source 21
Direct selection 21
Source selection 21
From standby mode 21
Switching 16–19
Economic standby to standby 18
Off completely 19
Operation to standby 16
Standby to Economic standby 18
Standby to Operation 17
Standby/Economic standby 17
Turning on to operation 19
Switching system 16, 18
Off/Operation mode 18
Operation/Standby 16
System 5
Overview 5
System Configuration 5
V
Video distribution solution 5
R5976667 CINEVERSUM SYSTEM 01102003
39