Home > Barco > Projector > Barco Projector Cineversum 120 User Manual

Barco Projector Cineversum 120 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Barco Projector Cineversum 120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 183 Barco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							7. Picture in Picture
    7. PICTURE IN PICTURE
    Overview
    • Turning On/Off the Picture in Picture
    • Selecting Input Source for PIP Window
    • Function keys for Picture in Picture
    7.1 Turning On/Off the Picture in Picture
    How to turn On/Off the PIP
    1. PressENTERto enter the adjustment menu. (image 7-1)
    2. Select theAdvance Settingsmenu. (menu 7-1)
    3. Select itemPiP Configurationby rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control.
    (menu 7-2)
    4. Press the selection wheel on the Master or pushENTERon the Remote Control to confirm.
    The sub menuPiP Configurationappears on-screen and in the graphical display. This menu contains the itemsPIPtoggle
    function Yes/No, Vertical and Horizontal shift and size alignment. (menu 7-3)
    5. Select itemPIP [yes]orPIP[No]by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control
    to confirm.
    6. Press theENTERkey on the Remote Control or the selection wheel on the Master to toggle the PIP function On (Yes) or Off (No).
    7. PressEXITkey on the Remote Control or select itemBACKto return.
    Cine VERSUM System
    Image Settings
    Advanced Settings
    Installation
    Service
    1 NO MODULE
    2 NO MODULE
    3 VIDEO [VIDEO]
    4 NO MODULE
    5 NO MODULE
    6 NO MODULE
    7 RGB-YUV [RGB]
    8 NO MODULE
    Shutdown
    Back
    Menu 7-1
    Advanced Settings
    Aspect Ratio
    Position
    Pip Configuration
    Blanking
    Phase
    Input Balance
    Back
    Menu 7-2
    PIP Configuration
    PIP [Yes]
    Horizontal Shift
    Horizontal Size
    Vertical Shift
    Vertical Size
    Back
    Menu 7-3
    Image 7-1
    When the PiP window is on the screen, and there is a switch between PiP [Yes]and PiP [No] , the PiP window
    remains on the screen until another source is selected.
    R5976667 CINEVERSUM SYSTEM 0110200327 
    						
    							7. Picture in Picture
    7.2 Selecting Input Source for PIP Window
    How to select input source for PIP window
    The procedure below supposes an already selected input source (main image) and the PIP function set to ’Yes’.
    1. Select the input source, remotely accessible with the digit keys on the Remote Control, you desire to be displayed into the PIP
    window.
    If no valid source is connected to the input of the selected input module, no PiP window appears.
    If a valid source is connected to the input, the selected input appears as PiP window on the screen. (image 7-2)
    2. If the same input source (PIP image) is selected again, then, the main image is replaced by the PIP image and the PiP window
    disappears.
    Image 7-2
    Picture in Picture
    When a PiP window is on the screen, zapping over inputs change only the PiP window. When the same source
    is pressed twice, the selected source becomes the main window and the PiP window disappears.
    7.3 Function keys for Picture in Picture
    Available keys
    F1PiP in left top corner
    F1 second timePiP in left top corner, bigger image
    F2PiP in left bottom corner
    F2 second timePiP in left bottom corner, bigger image
    F3Swap between main image and PiP
    F4PiP in right bottom corner
    F4 second timePiP in right bottom corner, bigger image
    F5PiP is right top corner
    F5 second timePiP in right top corner, bigger image
    How to use
    If second source is selected:
    1. press a function key to direct the PiP window to the desired corner. (image 7-3)
    2. press a second time on the same functionkey to enlarge the PiP window. (image 7-4)
    3. press F3 to swap between main source and PiP source.
    The main source will be displayed in the PiP window and the PiP window source will be displayed on the full screen. (image 7-5)
    28
    R5976667 CINEVERSUM SYSTEM 01102003 
    						
    							7. Picture in Picture
    Image 7-3
    PiP position
    A F1, left corner top
    B F2, left corner bottom
    C F4, right corner top
    D F5, right corner bottom
    Image 7-4
    PiP window enlarged
    A PiP normal format
    B Enlarged format
    R5976667 CINEVERSUM SYSTEM 01102003
    29 
    						
    							7. Picture in Picture
    Image 7-5
    PiP swap
    A Start image
    B Swapped image after pressing F3
    30
    R5976667 CINEVERSUM SYSTEM 01102003 
    						
    							8. Lens and Lamp manipulations
    8. LENS AND LAMP MANIPULATIONS
    Overview
    • Lens adjustment
    • Lamp
    8.1 Lens adjustment
    Lens
    Your projector is equipped with a zoom lens which is remote controlled. Also the focus of the lens can be adjusted via remote control.
    Shifting the image up - down or left - right is possible.
    The installation menu can be password protected. Consult the installation manual for further instructions.
    Overview
    • Access to controls
    • Focus adjustment
    • Horizontal shift
    • Vertical shift
    •Zoom
    8.1.1 Access to controls
    Access to the Lens adjustments via the Remote control
    1. Enter the adjustment menus by pressingENTERorADJ.
    The general menu will be displayed. (menu 8-1)
    2. Use the up or down arrow keys to selectInstallationand pressENTERto select.
    TheInstallationmenu will be displayed. (menu 8-2)
    3. Use the up or down arrow keys to selectDisplay listand pressENTERto select.
    TheDisplay listmenu will be displayed. (menu 8-3)
    4. Use the up or down arrow keys to select the display you want to adjust. E.g. projector 1. PressENTERto select.
    The selected display menu will be displayed. (menu 8-4)
    5. Use the up or down arrow keys to selectLens.PressENTERto select.
    TheLensmenu will be displayed. (menu 8-5)
    Cine VERSUM System
    Image Settings
    Advanced Settings
    Installation
    Service
    1 NO MODULE
    2 NO MODULE
    3 VIDEO [VIDEO]
    4 NO MODULE
    5 NO MODULE
    6 NO MODULE
    7 RGB-YUV [RGB]
    8 NO MODULE
    Shutdown
    Back
    Menu 8-1
    Installation
    Input slots
    File service
    Display list
    Internal pattern
    When no signal
    Source transition
    OSD Configuration
    Language
    Keystone
    Global keystone: Yes
    Output: [Largest]
    Default input balance
    Back
    Menu 8-2
    Display List
    Plasma 1
    Plasma 2
    Projector 1
    Projector 2
    Back
    Menu 8-3
    Display settings
    Switch OFF
    Display Info
    Rename
    IR address: 9
    Diagnosis
    Orientation
    Test Patterns
    Lens
    Lamp
    Back
    Menu 8-4
    R5976667 CINEVERSUM SYSTEM 0110200331 
    						
    							8. Lens and Lamp manipulations
    Lens
    Focus
    Horizontal shift
    Vertical shift
    Zoom
    Back
    Menu 8-5
    8.1.2 Focus adjustment
    Steps to be taken
    1. Use the up or down arrow keys to selectFocus.PressENTERto select. (menu 8-6)
    A message will be displayed to use the arrow keys to control the lens.
    2. Adjust with the arrow keys until sharp picture is obtained.
    Lens
    Focus
    Horizontal shift
    Vertical shift
    Zoom
    Back
    Menu 8-6
    8.1.3 Horizontal shift
    Steps to be taken
    1. Use the up or down arrow keys to selectHorizontal shift.PressENTERto select. (menu 8-7)
    A message will be displayed to use the arrow keys to control the lens.
    2. Use the arrow keys to shift the image horizontally. (image 8-1)
    Lens
    Focus
    Horizontal shift
    Vertical shift
    Zoom
    Back
    Menu 8-7
    32R5976667 CINEVERSUM SYSTEM 01102003 
    						
    							8. Lens and Lamp manipulations
    A
    BC
    Image 8-1
    Horizontal shift
    A Normal image
    B Image shifted to the right
    C Image shifted to the left
    8.1.4 Vertical shift
    Steps to be taken
    1. Use the up or down arrow keys to selectVertical shift.PressENTERto select. (menu 8-8)
    A message will be displayed to use the arrow keys to control the lens.
    2. Use the arrow keys to shift the image vertically. (image 8-2)
    Lens
    Focus
    Horizontal shift
    Vertical shift
    Zoom
    Back
    Menu 8-8
    ABC
    Image 8-2
    Ver ti cal shift
    A Normal image
    B Image shifted upwards
    C Image shifted downwards
    R5976667 CINEVERSUM SYSTEM 01102003
    33 
    						
    							8. Lens and Lamp manipulations
    8.1.5 Zoom
    Steps to be taken
    1. Use the up or down arrow keys to selectZoom.PressENTERto select. (menu 8-9)
    A message will be displayed to use the arrow keys to control the lens.
    2. Use the arrow keys to zoom in or out until the desired screen size is obtained. (image 8-3)
    Lens
    Focus
    Horizontal shift
    Vertical shift
    Zoom
    Back
    Menu 8-9
    A
    BC
    Image 8-3
    Zoom
    8.2 Lamp
    Lamp
    Your projector can work with a single lamp or with a dual lamp. The ignited lamp or lamps can be boosted in power between a low
    (200W) or a high power (250W).
    Overview
    • Access controls
    • Lamp mode
    • Lamp power
    34
    R5976667 CINEVERSUM SYSTEM 01102003 
    						
    							8. Lens and Lamp manipulations
    8.2.1 Access controls
    Access to the control with the Remote control
    1. Enter the adjustment menus by pressingENTERorADJ.
    The general menu will be displayed. (menu 8-10)
    2. Use the up or down arrow keys to selectImage Settingsand pressENTERto select.
    If you shoot with your remote control directly to the projector, theImage Settingsmenu for the projector will be displayed.
    (menu 8-11)
    If you shoot with your remote control to the master, theImage Settingsmenu for the master will be displayed. (menu 8-12)
    3. Use the up or down arrow keys to selectDisplayand pressENTERto select.
    TheDisplay listmenu will be displayed. (menu 8-13)
    4. Use the up or down arrow keys to select the display you want to adjust. E.g. projector 1. PressENTERto select.
    The Image settings for the selected display will be displayed.
    Cine VERSUM System
    Image Settings
    Advanced Settings
    Installation
    Service
    1 NO MODULE
    2 NO MODULE
    3 VIDEO [VIDEO]
    4 NO MODULE
    5 NO MODULE
    6 NO MODULE
    7 RGB-YUV [RGB]
    8 NO MODULE
    Shutdown
    Back
    Menu 8-10
    Image Settings
    Display
    Brightness
    Contrast
    Gamma
    Color Temperature
    Primary [Projector]
    Lamp mode [Single]
    Lamp power [Normal]
    Master
    Back
    Menu 8-11
    Image Settings
    Master
    Brightness
    Contrast
    Saturation
    Tint
    Display
    Back
    Menu 8-12
    Display List
    Plasma 1
    Plasma 2
    Projector 1
    Projector 2
    Back
    Menu 8-13
    8.2.2 Lamp mode
    Different modes
    As the projector is equipped with 2 lamps it can play in different modes.
    When both lamps are ignited, the light output is high, this mode is called “dual”. When one lamp fails in dual mode, the projector
    continues the projection using the remaining lamp.
    In stead of dual mode, it is possible to ignite the least used lamp by selectingSingle.
    Lamp mode selection is only possible if the projector is not forced to use a specific lamp (lamp 1 or lamp 2)
    Changing the mode
    1. Use the up or down arrow keys to selectLamp Mode. (menu 8-14)
    2. PressENTERto toggle betweenSingleandDual.
    Note:Switching from single to dual will take a some time as the second lamp has to be ignited.
    Image Settings
    Display
    Brightness
    Contrast
    Gamma
    Color Temperature
    Primary [Projector]
    Lamp mode [Single]
    Lamp power [Normal]
    Master
    Back
    Menu 8-14
    R5976667 CINEVERSUM SYSTEM 0110200335 
    						
    							8. Lens and Lamp manipulations
    Switching on / off the lamps all time, reduces the lifetime of the lamps
    8.2.3 Lamp power
    Overview
    The lamp can be powered in economic mode (200W) or normal mode (250W).
    How to switch
    1. Use the up or down arrow keys to selectLamp Power. (menu 8-15)
    2. PressENTERto toggle betweenNormalandEconomic.
    Note:Lamp life time will be extended in Economic mode.
    Image Settings
    Display
    Brightness
    Contrast
    Gamma
    Color Temperature
    Primary [Projector]
    Lamp mode [Single]
    Lamp power [Normal]
    Master
    Back
    Menu 8-15
    36R5976667 CINEVERSUM SYSTEM 01102003 
    						
    All Barco manuals Comments (0)

    Related Manuals for Barco Projector Cineversum 120 User Manual