Barco Projector Cineversum 120 User Manual

4. Switching On/Off the Cine Versum System
Image 4-5
Main menu
Image 4-6
Shutdown selection
Image 4-7
Power down messageImage 4-8
Enter menu screen
Using the Remote Control
1. Point the Remote Control to the front of the Cine VERSUM Master or to the Cine VERSUM 120.
2. Press the standby button
.(image4-9)
The Cine VERSUM Master and the Cine VERSUM 120 go from OPERATION to STANDBY.
Image 4-9
4.3.2 From STANDBY mode to OPERATION mode
Using the Jog dial on the Cine VERSUM Master
1. Rotate the jog dial until...

4. Switching On/Off the Cine Versum System
4.4.1 From STANDBY mode to Economic STANDBY
Using the Jog dial on the Cine VERSUM Master
1. Press the jog dial once to enter the Power up menu. (image 4-10)
2. Rotate the jog dial until “Economic” in the menu on the Cine VERSUM Master is pointed to. (image 4-11)
3. Press jog dial to activate the selection
The Cine VERSUM Master and the Cine VERSUM 120 go fromSTANDBY to Economic STANDBY. The economic standby is
visualized in the Master display with a...

4. Switching On/Off the Cine Versum System
4.5.1 Turning OFF the system from Operation mode
How to turn OFF the system totally
1. First, switch the system in the standby mode (see From OPERATION mode to STANDBY mode, page 16).
2. Press the power switch on the Cine VERSUM 120.
The Cine VERSUM 120 goes from standby to OFF.
3. Press the power switch on the Cine VERSUM Master (image 4-1).
The Cine VERSUM Master goes from standby to OFF.
4.6 Turning ON the system from total OFF mode
How to turn ON the system...

4. Switching On/Off the Cine Versum System
20R5976667 CINEVERSUM SYSTEM 01102003 

5. Direct source selection
5. DIRECT SOURCE SELECTION
5.1 From standby mode
Using the digit buttons on the Remote Control
1. Make sure that the connected sources to the Cine VERSUM Master are turned on.
2. Using the digit button on the Remote Control, key in the corresponding slot number (from 1 to 8). (image 5-1)
The Cine VERSUM Master powers up and starts on its turn powering up the connected displays. Image of the selected source
appears on the display.
Image 5-1
Digit buttons on Remote Control
Using...

5. Direct source selection
5.2 Return to standby mode
How to return to standby remotely
1. Point the Remote Control to the front of the Cine VERSUM Master or the Cine VERSUM 120.
2. Press the standby button on the Remote Control again. (image 5-2)
The Cine VERSUM Master switches to the standby mode and switches on its turn the connected display into the standby mode.
When switching the Cine VERSUM 120 into the standby mode, a cool down period for the lamp of about 1
minute is activated. As a result,...

6. Image Control
6. IMAGE CONTROL
Image controls
The Brightness, Contrast, Color and Tint functions are directly accessible with the Remote Control.
The adjustment functions, when selected, display a slide bar overlayed on the source image.
It is useful to adjust the Brightness, whenever the ambient room lightning changes. The same is true for
Contrast. Please note that for the best result, it is advised to first change the Brightness, then the Contrast.
6.1 Brightness Control
How to adjust the...

6. Image Control
Image 6-3
Image 6-4
6.3 Color (Saturation) Control
How to adjust the Color (Saturation)
The Color function is used to adjust color saturationlevels and is only active for Video and S-Video sources.
To adjust Color, press the(+)or(-)side of the button ’COLOR’ (image 6-5). The following barscale is overlayed on the source image,
image 6-6.
Press the(+)or(-)button until the desired color saturation level is displayed. If color is set to a 0% level, the result will be black and
white...

6. Image Control
6.4 Tint control
How to adjust Tint (Hue)
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when using
the NTSC4.43 or NTSC 3.58 color system. For PAL and SECAM sources, Tint is not adjustable.
To adjust Tint, press the(+)or(-)side of the button ’TINT’ (image 6-7). The following barscale is overlayed on the source image,im-
age 6-8.
Press the(+)or(-)button until an optimal display is obtained. It is best to adjust...

6. Image Control
26R5976667 CINEVERSUM SYSTEM 01102003