Barco Projector Cineversum 110 User Manual

12. Image Files Menu
Edit custom file
Video625.c01
Video625.c02
Active files:
Video625.c01
Image 12-6
Edit custom file
Name
Horizontal:
Vertical:
680
20
0
560
8 576720
AdvancedVideo625.c01
total
active
start
period
total
active
start
Image 12-7
It is recommended to use the default values.
12.5.2 Correct file parameters
What is already available during start up ?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are
automatically...

12. Image Files Menu
A long AGC hold interval eliminates Macrovision®disturbances since the AGC is hold during a long interval, thus reducing the
probability to encounter a Macrovision®pulse.
Thesync locking settingis recommended for poor video signals (ex: poor TV signals).
Sharpnessadjustment can be chosen to be coarse or fine.
It is recommended to use the default values.
12.5.4 Advanced Data settings
Overview
When a data source is selected, theadvancedbutton enables the advanced settings for a data...

12. Image Files Menu
12.6 Rename file
How to rename a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-12)
3. Press↓to pull down theImage filesmenu.
4. Use↑or↓to selectRename.
5. PressENTER
A dialog box is displayed. (image 12-13)
6. Use↑or↓to select the desired file.
7. PressENTER
A text box is displayed. (image 12-14)
8. PressENTERto activate the input field.
Use←or→to select the characters. Use the↓or↑to change the value.
9. PressENTERto confirm the...

12. Image Files Menu
8. PressENTERto activate the input field.
Use←or→to select the characters. Use the↓or↑to change the value.
9. PressENTERto confirm.
Image 12-15
Copy file
Video625.c01
Video625.c02
Video625.s01
Video525.s02
SDI_625.s03
SDI_525.s04
1600_48v.s05
1600_60v.s06
1600_65v.s07
1600_70v.s08
Image 12-16
Copy file
New name:
Video625.c01
Image 12-17
If the AutoImage function does not succeed in finding a file and no file is loaded (load list is empty), which
means that the source is not...

12. Image Files Menu
Image 12-18
Delete custom file
Active files:
Video625.c01
Video625.c02
All files
Image 12-19
R5976697 CINEVERSUM™ 110 12/05/2004111 

12. Image Files Menu
112R5976697 CINEVERSUM™ 110 12/05/2004 

13. Display Setup
13. DISPLAY SETUP
Overview
• Full screen representation
• Startup screen
•TextBox
• Take screenshot
• Menu bar position
• Status bar position
• Sliderbox position
• Auto Image Setup
13.1 Full screen representation
Purpose of the Full screen representation
TheFull screen representationfunction forces to use the complete native resolution of the DMD panels independently of the native
resolution of the source.
How to enable/disable the full screen representation ?
1. PressMENUto activate...

13. Display Setup
13.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup.
This startup screen can be disabled.
How to enable/disable the Startup screen?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-2)
3. Press↓to pull down theDisplay setupmenu.
4. Use↑or↓to selectStartup screen.
5. Press→to pull down the menu.
6. Use↓or↑to selectOnorOff.
On Start up screen will be...

13. Display Setup
Image 13-3
To enable the menus and dialog boxes again, press the TEXT button on the RCU.
13.4 Take screenshot
What can be done ?
A screen-shot can be taken from the active projected image. This screen-shot is then saved in a 4 MB RAM and can be used as
background (logo).
Each new screenshot erases the previous one, therefore a warning message is displayed asking the user to confirm.
How to take a screenshot ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem....

13. Display Setup
Screenshot
Erasing logo
Saving logo
Image 13-7
13.5 Menu bar position
What can be done ?
The menu bar can be centered vertically. The range is from the top of the screen to the middle of the screen.
This is useful in applications where the top image content is not displayed (e.g. due to blanking).
Image 13-8
Menu bar move
ANormalposition
B New position
How to center the menu ?
1. PressMENUto activate the menu bar.
2. Press→to select theDisplay setupitem. (image 13-9)
3. Press↓to pull...