Barco Projector Cineversum 110 User Manual

10. Signal menu
Image 10-2* Video may be Composite video/ S-Video / SDI
• dark arrow : fade in/out effect possible
• dotted arrow : undetermined case, fade in/out effect may take place or not
• striked out arrow : fade effect impossible
The switching effects are only possible in the full screen mode
10.3 Background
Purpose
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on thebackground
settings.
How to change the background ?
1....

10. Signal menu
6. Use↑or↓to select the desired background.
7. PressENTER.
Image 10-3
The logo display is only possible in the full screen mode, a logo can thus not be displayed (rescaled) in a
window in the PiP mode.
When there is no signal connected, the projector will also start its standby timer countdown (if enabled) and
shuts down after the predetermined time.
98R5976697 CINEVERSUM™ 110 12/05/2004 

11. Lamps Menu
11. LAMPS MENU
Overview
• Overview of the Lamps menu
• Runtimes
• Mode
• Economic ON/OFF
• Runtime warning
11.1 Overview of the Lamps menu
Overview
• Runtimes...
• Mode
- Single...
- Dual...
• Economic
• Runtime warning
11.2 Runtimes
How to display the lamp runtimes ?
1. PressMENUto activate the menu bar.
2. Press→to select theLampitem. (image 11-1)
3. Press↓to pull down theLampsmenu.
4. Use↑or↓to selectRuntimes.
5. PressENTER.
A text box is displayed. (image 11-2)
Image 11-1
Runtime
Lamp...

11. Lamps Menu
11.3 Mode
Single lamp mode
The projector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp 1 and lamp
2 reaches100 hours, switching from one lamp to another happens only at switching on of the projector and not during operation.
When the lamp fails or reaches its maximum runtime the projector switches automatically to the other lamp without interrupting the
projection. The failure is logged and the lamp will never be initialized in...

11. Lamps Menu
Image 11-4
When switching from the dual mode to the single mode the lamp with the longest runtime is switched off.
If the runtimes are equal (if the projector has always been operated in dual mode) then lamp 1 is switched out.
When switching to single mode, returning to the dual mode will not be possible in the first 60 seconds,Dual
in the menu is greyed out and LED3 is flickering, thereby preventing hot restrike which may damage the lamp.
11.4 Economic ON/OFF
What can be done?
The lamp...

11. Lamps Menu
4. Use↑or↓to selectRuntime warning.
5. PressENTERto confirm.
A dialog box is displayed. (image 11-7)
6. PressENTERto activate the input field.
7. Use←or→to change the runtime warning setting.
Or,
enter the desired value with the digit keys on the remote control.
8. PressBackto return.
Image 11-6
Lamp runtime warning
hrs before end of lamp lifetime
30
Image 11-7
WARNING:Lamp replacement should be done by a Barco authorized technician.
102R5976697 CINEVERSUM™ 110 12/05/2004 

12. Image Files Menu
12. IMAGE FILES MENU
Overview
• Overview of the Image Files Menu
• Introduction to image files
• Load file
• Auto Image
• Edit file
• Rename file
• Copy
• Delete
12.1 Overview of the Image Files Menu
Overview
• Load
•Filesort
-name
- index
•Autoimage
- Limited scan
- Full scan
• Edit...
• Rename...
• Copy...
• Delete...
12.2 Introduction to image files
Introduction
An image file contains the main characteristics of a source (number of active lines,...). The projector’s memory...

12. Image Files Menu
4. Use↑or↓to selectLoad.
5. PressENTER.
A dialog box is displayed. (image 12-2)
6. Use↑or↓to select the desired file.
Tip:For more info about the available image files and thespecifications, see Chapter Standard Image Files.
7. PressENTERto confirm.
The file will be loaded and the image is adapted accordingly.
Image 12-1
Load file
Video625.c01
Video625.c02
Video625.s00
Image 12-2
load file dialogbox in case of a video source...

12. Image Files Menu
The measure of the total number of pixels per line can be done through 2 methods
• Limited scan: a windowing is used to allow fast tracking.
The operation takes about 20 seconds (depending on file)
• Full scan: tracking is done over the full range.
The operation takes about 1.5 minutes (depending on file)
How to launch Auto Image?
1. PressMENUto activate the menubar (image 12-3)
2. Press→to select theImage filesitem
3. Press↓to pull down theImage filesmenu
4. Use↑or↓to selectAuto...

12. Image Files Menu
12.5 Edit file
Overview
• Editing a file
• Correct file parameters
• Advanced video settings
• Advanced Data settings
12.5.1 Editing a file
What can be done with the Edit file menu ?
The Edit file menu makes it possible to adapt the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
How to edit a file ?
1. PressMENUto activate the menu bar.
2. Press→to select theImage filesitem. (image 12-5)
3....