Bang & Olufsen Television Beovision10 User Manual

Installation and setting up 
Audio system 
Connect a Bang & Olufsen audio system with a Master Link socket to your T V. Connect it to the 
Master Link socket on the main connection panel. 
Mains cord and plug  The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains cord is 
damaged, you must buy a new one from your Bang & Olufsen retailer. Connect the ~ socket on the main connection panel 
of your T V to the wall outlet. The IR-receiver lights up...

Connection panels 
Any equipment you connect to the main connection panel must be registered in the ‘CONNECTIONS’ menu. See p. 29. 
Useful hints 
~ – Mains supply  Connection to the mains supply. 
 
Connect stereo headphones. 
Note: Prolonged listening at high volume levels  can cause hearing damage!  AV 
(1–2 and 4) 
21-pin sockets for connection of additional video equipment, such as a DVD player or set-top box. 
AV 3  (video, L, R) 
For audio connection (right and left sound 
channel respectively) and...

Installation and setting up 
Y – Pb – Pr For video signals from an external source, e.g. 
HDT V source. You can use the socket in  conjunction with an AV socket or a digital audio 
socket.
SPDIF (1–2)  
Digital audio input socket, e.g. DVD player. You  can use the socket in conjunction with an AV 
socket. 
PUC (1– 4)  
For IR control signals to external equipment 
connected to an AV socket. 
HDMI IN (A– C)  For High Definition Multimedia Interface video 
source or PC. The sources can be registered to any...

First-time setup of your television 
Connections Select the type of equipment connected to each socket, the sockets 
used, the product name, and the source name. 
Information 
This first-time setup procedure is activated when the T V is connected to the mains 
and switched on for the first time. If you want to change your setup at a later date, 
you can access the same menus and update your settings. 
Switch on the TV 
Select settings 
You are led through the following settings only  when you switch on...

Installation and setting up 
Calibrate the speakers 
Set up the speakers to optimise sound from your listening position. 
Calibrate the stand 
Set the maximum angle the T V will turn – left and right. The motorised movement of the T V will not 
work until the calibration process has been  completed. You can only tilt the T V manually.  First-time setup of loudspeakers applies only to speakers for T V viewing.  
See also ‘Loudspeaker setup’ on pp. 36 –37 and ‘Surround sound’ on  p. 14. 
Adjust volume,...

Switch on the T V to adjust speaker settings. 
Select speaker setup Select ‘OPTIONS’ to bring up 
‘SOUND’ menu 
Switch on T V and bring up ‘T V 
SETUP’ menu 
Sound during setup   During the setup process, a sound is sometimes produced by a speaker. Check if the highlighted 
speaker matches the name of the speaker making the sound. 
Set speaker type 
Register the type of each speaker in the menu. 
Loudspeaker setup 
Enter the straight-line distances in metres  between your favourite viewing position and...

Installation and setting up 
Calibrate the sound level 
A calibration sound is produced alternately in each speaker. Adjust the speakers to match the 
centre speaker’s sound level. This will ensure an  optimal surround sound. 
 . 
NOTE! Once you have performed the speaker 
calibration, you will only need to re-calibrate the 
speaker sound if you make changes to the setup. 
Select ‘AUTOMATIC’ 
or ‘MANUAL’ in 
‘SEQUENCE’ 
Select ‘SPEAKER LEVEL’ 
menu  Accept 
See active sound system 
See the name of the...

Additional settings 
Set a position for when you watch T V, listen to music, and when the T V is switched off. See p. 35 about first-time installation of the stand. 
Positions of the TV Select ‘VIDEO‘, 
‘A U D I O ‘,  
‘STANDBY’ or 
‘STAND  ADJUSTMENT’
Bring up ‘T V 
SETUP‘ menu and  select ‘OPTIONS’ menu  Accept*
1 
Turn T V as 
desired 
Useful hints
You can make the T V switch off after a specific period of time. It is set to four hours 
from the factory. You can also set positions for the T V to turn...

On-screen menus 
General settings: Select TV and MENU. 
Maintenance 
Screen  
Cabinet and controls  Never alcohol  Regular maintenance, such as cleaning, is the responsibility of the user. 
Use a mild window cleaning fluid and lightly clean the screen without leaving streaks or traces. Some micro-fibre cloths may  harm the optical coating due to their strong abrasive effect. See also p. 27. 
Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and a...

This product is in conformity with the provisions of the Directives 
2004/108/EC and 2006/95/EC. 
This product incorporates copyright protection  technology that is protected by U.S. patents and other intellectual property rights. Use of this copy -
right protection technology must be authorized by 
Rovi, and is intended for home and other limited  viewing uses only unless otherwise authorized by 
Rovi. Reverse engineering or disassembly is  prohibited. 
HDMI, the HDMI logo and High-Definition Multi -...