Bang & Olufsen Television Beovision10 User Manual

							Installation and setting up 
Audio system 
Connect a Bang & Olufsen audio system with a Master Link socket to your T V. Connect it to the 
Master Link socket on the main connection panel. 
Mains cord and plug  The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains cord is 
damaged, you must buy a new one from your Bang & Olufsen retailer. Connect the ~ socket on the main connection panel 
of your T V to the wall outlet. The IR-receiver lights up in red and the T V is in standby mode and ready to be used.  IR-transmitters:
 To operate non-Bang & Olufsen 
products with a Bang & Olufsen remote control, 
attach a Bang & Olufsen IR-transmitter to each of 
the products. Connect each transmitter to the  corresponding socket marked PUC on the main 
connection panel. 
IR type
In the AV menus you can select how a PUC controlled product is connected. You can choose  between ‘PLUG’ (cable) and ‘IR’ (IR Blaster). Only 
accessible if you have selected an IR socket. 
ML
STB
STB PLUG
IR
31 
						

							Connection panels 
Any equipment you connect to the main connection panel must be registered in the ‘CONNECTIONS’ menu. See p. 29. 
Useful hints 
~ – Mains supply  Connection to the mains supply. 
 
Connect stereo headphones. 
Note: Prolonged listening at high volume levels  can cause hearing damage!  AV 
(1–2 and 4) 
21-pin sockets for connection of additional video equipment, such as a DVD player or set-top box. 
AV 3  (video, L, R) 
For audio connection (right and left sound 
channel respectively) and video signals from an  external source. 
Headphones  To mute speakers press the middle of the volume button. Press the volume up or down to adjust volume in headphones. 
To restore sound in speakers, press the middle of the volume button. 
CAMERA5
32
Mains supply 
						

							Installation and setting up 
Y – Pb – Pr For video signals from an external source, e.g. 
HDT V source. You can use the socket in  conjunction with an AV socket or a digital audio 
socket.
SPDIF (1–2)  
Digital audio input socket, e.g. DVD player. You  can use the socket in conjunction with an AV 
socket. 
PUC (1– 4)  
For IR control signals to external equipment 
connected to an AV socket. 
HDMI IN (A– C)  For High Definition Multimedia Interface video 
source or PC. The sources can be registered to any  of the AV socket groups. To expand the number 
of HDMI sockets, connect an HDMI Expander to 
the HDMI C socket.*
1  VGA
 (AV3) 
For connection of a PC to receive analogue 
graphics.
MASTER LINK  For a compatible Bang & Olufsen audio or video 
system. 
POWER LINK (SUB)  
Use for connection of a Bang & Olufsen  s u b w o o fe r. 
POWER LINK (FRONT – REAR) 
Use for connection of external loudspeakers in a  surround sound setup. See also pp. 36 –37. 
STAND  For connection of a motorised stand. 
CAMERA  (R, L, video, AV5) 
For audio connection (right and left sound 
channel respectively) and video signals from an  external source. 
1*The ‘AV6’ menu  The ‘AV6’ menu becomes available in the ‘CONNECTIONS’ menu when an HDMI Expander is 
connected. See p. 30. 
33 
						

							First-time setup of your television 
Connections Select the type of equipment connected to each socket, the sockets 
used, the product name, and the source name. 
Information 
This first-time setup procedure is activated when the T V is connected to the mains 
and switched on for the first time. If you want to change your setup at a later date, 
you can access the same menus and update your settings. 
Switch on the TV 
Select settings 
You are led through the following settings only  when you switch on the T V for the first time.*1 
It takes the T V approx. 20 seconds to start up and 
become ready for use.  Switch on  
Select setting  Accept and go to next menu item 
Set the on-screen menu language  Calibrate the stand, see p. 35 
Set stand positions, see pp. 35 and 38  Register connected equipment, see p. 29 
1*NOTE! When you have selected the preferred 
settings in a menu, you may have to press the 
green button to continue to the next menu in the 
first-time setup procedure. Follow on-screen  instructions. 
T V 
MENU L ANGUAGE 
STAND ADJUSTMENT
STAND POSITIONS
CONNECTIONS 
34 
						

							Installation and setting up 
Calibrate the speakers 
Set up the speakers to optimise sound from your listening position. 
Calibrate the stand 
Set the maximum angle the T V will turn – left and right. The motorised movement of the T V will not 
work until the calibration process has been  completed. You can only tilt the T V manually.  First-time setup of loudspeakers applies only to speakers for T V viewing.  
See also ‘Loudspeaker setup’ on pp. 36 –37 and ‘Surround sound’ on  p. 14. 
Adjust volume, bass, treble and loudness and preset two default speaker  combinations. Select a different speaker combination at any time. See pp. 14 –15. 
At ‘SET LEFTMOST  POSITION’ turn left to the point you wish to restrict 
the movement to  At ‘SET RIGHTMOST 
POSITION’ turn right to the point you wish to restrict the 
movement to  Accept 
Set preferred preset position for the T V to turn to, when it is switched  on and off. See p. 38. 
NOTE! You need to calibrate the stand before you 
can use the motorised movement of the stand. 
STAND POSITIONS 
SPEAKER T YPE 
SPEAKER DISTANCE 
SPEAKER LEVEL 
SOUND ADJUSTMENT 
STAND ADJUSTMENT 
35 
						

							Switch on the T V to adjust speaker settings. 
Select speaker setup Select ‘OPTIONS’ to bring up 
‘SOUND’ menu 
Switch on T V and bring up ‘T V 
SETUP’ menu 
Sound during setup   During the setup process, a sound is sometimes produced by a speaker. Check if the highlighted 
speaker matches the name of the speaker making the sound. 
Set speaker type 
Register the type of each speaker in the menu. 
Loudspeaker setup 
Enter the straight-line distances in metres  between your favourite viewing position and 
the individual speakers. 
Set speaker distance 
Select speaker and reveal  speaker type 
Select ‘SPEAKER T YPE’ menu 
Add Power Link speakers and a BeoLab subwoofer to your TV and you have a 
surround sound system. 
Select speaker and select  distance 
Select ‘SPEAKER DISTANCE’ 
menu  Accept 
Accept 
Select menu 
Information 
Set speaker distance 
CENTRELEFT 
FRONT RIGHT 
FRONT
RIGHT 
REARLEFT 
REAR
36 
						

							Installation and setting up 
Calibrate the sound level 
A calibration sound is produced alternately in each speaker. Adjust the speakers to match the 
centre speaker’s sound level. This will ensure an  optimal surround sound. 
 . 
NOTE! Once you have performed the speaker 
calibration, you will only need to re-calibrate the 
speaker sound if you make changes to the setup. 
Select ‘AUTOMATIC’ 
or ‘MANUAL’ in 
‘SEQUENCE’ 
Select ‘SPEAKER LEVEL’ 
menu  Accept 
See active sound system 
See the name of the active sound system for a 
source or programme on the screen.  Select ‘SOUND SYSTEM’ menu If ‘MANUAL’ is 
selected, select 
speaker and adjust  level 
Select ‘OPTIONS’ to  bring up ‘SOUND’ 
menu 
Bring up ‘T V SETUP’ 
menu 
37 
						

							Additional settings 
Set a position for when you watch T V, listen to music, and when the T V is switched off. See p. 35 about first-time installation of the stand. 
Positions of the TV Select ‘VIDEO‘, 
‘A U D I O ‘,  
‘STANDBY’ or 
‘STAND  ADJUSTMENT’
Bring up ‘T V 
SETUP‘ menu and  select ‘OPTIONS’ menu  Accept*
1 
Turn T V as 
desired 
Useful hints
You can make the T V switch off after a specific period of time. It is set to four hours 
from the factory. You can also set positions for the T V to turn to. 
1*First-time setup  During first-time setup, when you have set the T V positions, press the green button to continue first-
time setup. 
Set the T V to switch off after a specific period 
of time without operation. Only in video mode. 
Activate auto standby
You can deactivate the auto standby at any  time. 
Deactivate auto standby
Select ‘OPTIONS’ menu 
Bring up ‘T V 
SETUP‘ menu 
Select ‘AUTO STANDBY‘ and then ‘OFF’
Bring up ‘T V 
SETUP‘ menu Select ‘AUTO STANDBY‘ and make your selection
Select ‘OPTIONS’  menu 
Select ‘STAND  POSITIONS’ menu 
ST AND POSITIONS
VIDEO
A UDIO
ST ANDBY
ST AND  ADJUSTMENT
 
  select
38  
						

							On-screen menus 
General settings: Select TV and MENU. 
Maintenance 
Screen  
Cabinet and controls  Never alcohol  Regular maintenance, such as cleaning, is the responsibility of the user. 
Use a mild window cleaning fluid and lightly clean the screen without leaving streaks or traces. Some micro-fibre cloths may  harm the optical coating due to their strong abrasive effect. See also p. 27. 
Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and a solution of water  and mild detergent, such as washing-up liquid. Never use alcohol or other solvents to clean any parts of the T V. 
Cleaning 
SLEEP TIMER  p. 17 
PL AY TIMER 
OPTIONS
TIMER  p. 17 
CONNECTIONS
SOUND 
PICTURE
STAND POSITIONS 
AUTO STANDBY  p. 38
BEO4 SETTING  p. 6
MENU L ANGUAGE 
AV1–AV6   p. 29
HDMI EXPANDER    p. 29
SOUND ADJUSTMENT    p. 15
SPEAKER T YPE    p. 36
SPEAKER DISTANCE    p. 36
SPEAKER LEVEL   p. 37
SOUND SYSTEM   p. 37
BRIGHTNESS    p. 15
CONTRAST  p. 15
COLOUR    p. 15
TINT  p. 15
SIZE  p. 15
HOR. SIZE  p. 15
VERT. SIZE  p. 15
HOR. POSITION  p. 15
VERT. POSITION  p. 15
GAME MODE  p. 16
VIDEO   p. 38
AUDIO   p. 38 
STANDBY   p. 38 
STAND ADJUSTMENT   p. 38
NAVIGATION BUTTON
NO NAVIGATION BUTTON
1. 2.Select settings 3.
39 
						

							This product is in conformity with the provisions of the Directives 
2004/108/EC and 2006/95/EC. 
This product incorporates copyright protection  technology that is protected by U.S. patents and other intellectual property rights. Use of this copy -
right protection technology must be authorized by 
Rovi, and is intended for home and other limited  viewing uses only unless otherwise authorized by 
Rovi. Reverse engineering or disassembly is  prohibited. 
HDMI, the HDMI logo and High-Definition Multi -
media Interface are trademarks or registered 
trade  
marks of HDMI Licensing LLC.  For the US-market only! 
NOTE: This equipment has been tested and found 
to comply with the limits for a class B digital  device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable  protection against harm  
ful interference in a 
residential   installation. 
This equipment generates, uses and can radiate   radio frequency energy and, if not installed and 
used in   accordance with the instructions, may 
cause harmful interference to radio 
communications. However, there is no guarantee 
that interference will not occur in a particular  installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equip   ment off 
and on, the user is   encouraged to try to correct 
the   interference by one or more of the following 
measures: 
–  Reorient or relocate the receiving antenna. 
–  Increase the separation between the equipment 
and receiver. 
–  Connect the equipment into an outlet on a 
circuit different from that to which the receiver 
is connected. 
–  Consult the retailer or an experienced radio/ T V 
technician for help. 
For the Canadian market only! 
This class B digital apparatus meets all require -
ments of the Canadian Interference-Causing 
Equipment Regulations. Manufactured under license from Dolby 
Laboratories. Dolby, Pro Logic, and the 
double-D symbol are registered trademarks of  Dolby Laboratories. 
Confidential unpublished works. 
Copyright 1992–2003 Dolby Laboratories.  All rights reserved. 
Manufactured under 
license under U.S. Patent #’s: 5,451,942; 
5,956,674; 5,974,380; 5,978,762; 6,487,535;  7,003,467; 7,212,872 & other U.S. and worldwide patents issued & pending. 
DTS, DTS Digital Surround, ES, and Neo:6 are 
registered trademarks and the DTS logos, and  Symbol are trademarks of DTS, Inc.  © 1996 -2008 DTS, Inc. All Rights Reserved. 
40