Bang & Olufsen Television Beovision10 User Manual

							Installation and setting up 
NOTE! Not all Bang & Olufsen audio systems 
support integration with the T V. For more  information, contact your Bang & Olufsen retailer. 
Options  
For information about Option 4, 5 and 6, see pp. 23–24. 
Your audio/video system can be placed together in one room or in two rooms with 
the T V in one and the audio system with a set of speakers in another. 
Select Options 
This page provides an overview of the Options  available when using the Beo4 remote control.  
To set the correct Options with Beo5,  select the  zone in which your product is placed, see p. 25. 
The T V with or without additional speakers and an audio system with a connected set of speakers are set up in one room. 
Set the T V to Option 1 and the audio system to  Option 1. 
The T V and audio system are set up in one room 
with all speakers connected to the T V. 
Set the T V to Option 2 and the audio system to  Option 0. 
The audio system is set up in one room and the T V  with or without additional speakers in another. 
Set the T V to Option 2 and the audio system to  Option 2. Option 0
Option 2
Option 1
Option 1
Option 2
Option 2
21 
						

							Useful hints 
NOTE! HDMI signals cannot be distributed from a main room T V to the link room system. 1*Connected equipment If an audio system is already connected to the MASTER LINK socket 
and you wish to connect more equipment, the Master Link cable  must be split in two and joined with the cable from the link room 
using a special junction box. Contact your Bang & Olufsen retailer for 
assistance. 
Connect and set up a BeoLink system 
Connect and set up a BeoLink system to see pictures and hear sound in link rooms. 
You can, for example, connect the living room T V to another video system or to a  set of speakers in another room. 
To distribute video signals to link rooms, it is necessary to connect a non-Bang & Olufsen link 
tuner to the link room T V.*
1 
Connect a link tuner
MASTER LINK AV
2
MASTER
LINK
RF OUT
Option 6*
22
Main room
Link room
Link tuner 
						

							Installation and setting up 
1*NOTE! If you have a Beo4 and you connect the T V 
for use in a link room where other link systems are  already connected, such as speakers, you must set 
the T V to Option 5 instead. 
Your television in a link room 
If you have a BeoLink system, operate all connected systems through the T V in a 
link room. 
Follow the procedure described here when you 
connect your T V for use in a link room. 
Connect link room TV 
For your entire system to function properly, it is  essential that the T V in the link room is set to the 
correct Option before you connect it to the 
system in the main room. Stand in front of the link  room T V. 
Set Option for a link room TV 
Press Select zone in which T V is placed 
Select 
OPTION?  
and accept  Select 
V.O P T Select Option 
6*
1 
Hold  and
Press 
and
Hold  Press 
Option 
pgm 
LIST 
… 
LIST LIST 6 
23
1  Connect the link room T V to the mains 
supply. 
2  Use your remote control to program the 
link room T V to the correct Option. 
3  Disconnect the link room T V from the 
mains. 
4  Make the necessary connections. 
5  Reconnect the link room T V to the mains 
supply.  
						

							Useful hints Two televisions in the same room 
If you have two T Vs in the same room and one remote control for both T Vs, it is 
essential that the T Vs are set to the correct Options for them to function properly. 
If you place a second T V in a main room where 
you already have a Bang & Olufsen T V and  commands from your remote control can be received by both T Vs, you must change the 
Option of the secondary T V to prevent  simultaneous activation of both T Vs. Stand in 
front of the secondary T V. 
Select the correct Option 
Select  LINK  Select source 
Activate a source simply by pressing the relevant 
source button. However, if your T V is set to 
Option 4 and you are using a Beo4, follow the  instructions to activate a source. If you wish to dedicate a remote control to your 
secondary T V, contact your Bang & Olufsen  retailer. 
Beo4 – operate TV in Option 4 
LINK on Beo4  In order to display LINK
 on Beo4, you must first add it to the Beo4 
list of functions. See your Beo4 guide for more information.  Press
Select zone in which T V is placed*
1 
Select 
OPTION?  
and accept  Select 
V.O P T Select Option 4 
Hold  and
Press 
and
Hold  Press 
LIST TV
LIST 
… 
LIST LIST 4 
BeoVision 10
Option 4
TV
LIST
LINK TV
Option pgm 
24 
						

							Installation and setting up 
1*NOTE! For information about choice of zone, 
contact your Bang & Olufsen retailer. 
Select zone for the T V you 
wish to use  Select source 
Normally, if you have a Beo5, you can activate a 
source simply by pressing the relevant source  button. But if you have two T Vs in the same room, 
you must remember first to select the zone of the 
T V you wish to use. 
Beo5 – operate the TVs … BeoV ision 10
Zone ‘A ’
Zone ‘B’
TV
Zone
 ‘A’
TV
BeoV ision 10
Zone ‘B’
T V 
25 
						

							Set up your television 
Important 
Ventilation
Follow the guidelines for placement and connection described on this and the 
following pages. 
Handling 
We recommend that you place the T V in the  packaging while you fasten the hinges for the wall 
bracket or the bracket for the stand. 
Wall bracket and motorised stand 
Set the maximum angle the T V will turn on the  stand. See p. 35. The wall bracket can manually be 
turned 45˚ left or right depending on your setup.  Remember to leave enough space around the T V 
to allow it to turn and tilt freely. 
Placement options 
The T V can be placed on a motorised stand or  mounted on a wall bracket. 
To ensure proper ventilation, allow enough space around the screen. Do not cover the fans. At over   heating (flashing 
standby indicator and an on-screen warning), switch the T V to standby, not off, in order for the T V to cool down.  
You cannot operate the T V during this time.  Due to the heavy weight of the T V, any moving or
lifting of the T V should be performed by qualified
personnel – using the proper equipment.
Three protection profiles have been enclosed with  the T V. Use these when moving the T V to avoid scratching the frame. 
26 
						

							Installation and setting up 
Run cables
You can fasten the cables to either side or in the middle, depending on wall bracket or stand placement. 
Overview 
If you have a motorised stand make sure that 
there is enough slack in the cables to allow the 
T V to turn to either side before you fasten the  cables with cable strips to make a neat bundle. 
Fasten the front cloth cover
NOTE! If the front screen glass should crack or chip, or if it should be damaged in any way, it must be replaced immediately, as it could otherwise cause injury. You can order replacement front screen glass 
from your Bang & Olufsen retailer. 
Locate the connection panel and other important 
items. 
When the T V is placed on a wall bracket or stand  you can attach the front cloth cover.
Hold the front cover with both hands and attach it  at the bottom first. Then carefully attach it to the 
top and adjust its position before letting go.  During cleaning it is recommended to remove the 
front cover. Avoid spraying liquid directly on the  screen as this may damage the speakers, use a 
soft cloth instead. See p. 39 also. 
Carefully remove the front cover by supporting it  in the side and at the bottom. 
1 
Mounting bracket for wall bracket. 
2  Mounting bracket for stand. 
3  Cover for the connection panel. Here you also 
find the mains supply connection. Pull out at  the bottom to remove the cover. 
4  Depending on your setup, lead the cables 
through one of the three holes. Remove the  part of the cover using a pair of tongs. 
27 
						

							Expand your setup 
Information 
Your T V supports a wide range of additional equipment. 
‘STANDBY OPTIONS’  Set the set-top box to switch off when you change source or when you switch off the T V. You can also choose that the 
set-top box should always be switched on or that it should be switched on and off manually by means of the remote control. 
Disconnect from the mains 
While expanding your setup, the T V must be  disconnected from the mains.  Disconnect T V from mains 
Switch off T V 
Connect additional equipment 
To operate non-Bang & Olufsen products with 
Beo4, attach a Bang & Olufsen IR-transmitter to each product. See also p. 31.  Select settings in the 
‘CONNECTIONS’ menu 
Make the connections 
Switch on the TV 
Always attach covers before you connect the T V 
to the mains.  Connect T V to mains supply 
Attach all connection covers  Switch on T V 
Connect external set-top box 
To get access to any channels you must connect 
an external set-top box. Make sure you have a 21-pin cable, an adaptor and other required 
equipment.  Select settings in the 
‘CONNECTIONS’ menu
Connect set-top box 
28 
						

							Installation and setting up 
Register additional equipment 
If not detected automatically by the T V, register 
the equipment you have connected to the T V.  Repeat the procedure for each socket group.  Select ‘OPTIONS’ 
to bring up 
‘CONNECTIONS’  menu 
Bring up ‘T V 
SETUP’ menu  Select sockets in 
a socket group 
and register 
VGA 
Y – Pb – Pr  HDMI Equipment connected via VGA socket (AV3). 
Equipment connected via Y – Pb – Pr socket (AV2–AV4 and AV6). 
Equipment connected via an HDMI socket. If you have set the ‘HDMI EXPANDER’ in the ‘CONNECTIONS’ menu to ‘YES’, the 
‘C’ option in the ‘AV’ menus is replaced with ‘C1’, ‘C2’, ‘C3’, and ‘C4’. Then the ‘A6’ menu also becomes available.  Follow on-screen 
instructions 
Source options in  the ‘AV1–AV4’ 
and ‘AV6’ menus
  
Contents of the  
‘CONNECTIONS’  menu 
The above are only examples of registrations; you can register available equipment to any source option. You may also have to register additional 
equipment in the Master Link system.  Select ‘STANDBY 
OPTIONS’ menu
29
NONE 
V. M EM  DVD
DVD2
DT V2 (V.AUX) 
DT V 
V. AU X 2 
T V  PC 
LINK  Nothing connected 
Connected set-top box (only AV2- 4 and AV6)
Connected DVD player or recorder 
Connected DVD player or recorder Equipment, such as a set-top box 
Equipment, such as a set-top box 
Equipment, such as a video game console 
Equipment, such as a set-top box 
Connected PC or BeoMaster (only AV3) 
Connected link tuner (AV2) 
AV1– AV6  HDMI EXPANDER  Register connected equipment 
Enable or disable an HDMI Expander connected 
to the HDMI C socket  
						

							Set up the T V with video sources and loudspeakers. 
Loudspeakers 
Use Bang & Olufsen Power Link speakers. Use the cables enclosed with the speakers. Cables are 
available from your Bang & Olufsen retailer. 
Equipment with HDMI output  Equipment with HDMI output such as a set-top box can be connected to any available HDMI socket in the T V, regardless of 
the particular AV socket group to which you have connected the equipment. To distribute the source to another room you  must also connect the equipment to a 21-pin socket or AV3 video input socket on the connection panel. For more 
information on how to set up connected equipment for use, see p. 32. 
Useful hints  Set up additional equipment 
Additional video equipment 
Connect many different types of video equip
 
ment 
at the same time. Here you can see examples of  source names you can select for the equipment in 
the ‘CONNECTIONS’ menu. 
Note: If an HDMI Expander is connected the ‘AV6’ menu is also available. 
HDMI  CHDMI Expander
AV 1–5
PUC 1–4 PUC 1–4STB
AV  1–5DVD
AV 2Link T unerPOWER LINK 
SUB
POWE R LINK  
RE AR
PO WE R LINK  
FR ON T
30