Bang & Olufsen Television Beovision10 User Manual

Installation and setting up 
NOTE! Not all Bang & Olufsen audio systems 
support integration with the T V. For more  information, contact your Bang & Olufsen retailer. 
Options  
For information about Option 4, 5 and 6, see pp. 23–24. 
Your audio/video system can be placed together in one room or in two rooms with 
the T V in one and the audio system with a set of speakers in another. 
Select Options 
This page provides an overview of the Options  available when using the Beo4 remote control.  
To set...

Useful hints 
NOTE! HDMI signals cannot be distributed from a main room T V to the link room system. 1*Connected equipment If an audio system is already connected to the MASTER LINK socket 
and you wish to connect more equipment, the Master Link cable  must be split in two and joined with the cable from the link room 
using a special junction box. Contact your Bang & Olufsen retailer for 
assistance. 
Connect and set up a BeoLink system 
Connect and set up a BeoLink system to see pictures and hear sound...

Installation and setting up 
1*NOTE! If you have a Beo4 and you connect the T V 
for use in a link room where other link systems are  already connected, such as speakers, you must set 
the T V to Option 5 instead. 
Your television in a link room 
If you have a BeoLink system, operate all connected systems through the T V in a 
link room. 
Follow the procedure described here when you 
connect your T V for use in a link room. 
Connect link room TV 
For your entire system to function properly, it is...

Useful hints Two televisions in the same room 
If you have two T Vs in the same room and one remote control for both T Vs, it is 
essential that the T Vs are set to the correct Options for them to function properly. 
If you place a second T V in a main room where 
you already have a Bang & Olufsen T V and  commands from your remote control can be received by both T Vs, you must change the 
Option of the secondary T V to prevent  simultaneous activation of both T Vs. Stand in 
front of the secondary T V....

Installation and setting up 
1*NOTE! For information about choice of zone, 
contact your Bang & Olufsen retailer. 
Select zone for the T V you 
wish to use  Select source 
Normally, if you have a Beo5, you can activate a 
source simply by pressing the relevant source  button. But if you have two T Vs in the same room, 
you must remember first to select the zone of the 
T V you wish to use. 
Beo5 – operate the TVs … BeoV ision 10
Zone ‘A ’
Zone ‘B’
TV
Zone
 ‘A’
TV
BeoV ision 10
Zone ‘B’
T V 
25 

Set up your television 
Important 
Ventilation
Follow the guidelines for placement and connection described on this and the 
following pages. 
Handling 
We recommend that you place the T V in the  packaging while you fasten the hinges for the wall 
bracket or the bracket for the stand. 
Wall bracket and motorised stand 
Set the maximum angle the T V will turn on the  stand. See p. 35. The wall bracket can manually be 
turned 45˚ left or right depending on your setup.  Remember to leave enough space...

Installation and setting up 
Run cables
You can fasten the cables to either side or in the middle, depending on wall bracket or stand placement. 
Overview 
If you have a motorised stand make sure that 
there is enough slack in the cables to allow the 
T V to turn to either side before you fasten the  cables with cable strips to make a neat bundle. 
Fasten the front cloth cover
NOTE! If the front screen glass should crack or chip, or if it should be damaged in any way, it must be replaced immediately, as...

Expand your setup 
Information 
Your T V supports a wide range of additional equipment. 
‘STANDBY OPTIONS’  Set the set-top box to switch off when you change source or when you switch off the T V. You can also choose that the 
set-top box should always be switched on or that it should be switched on and off manually by means of the remote control. 
Disconnect from the mains 
While expanding your setup, the T V must be  disconnected from the mains.  Disconnect T V from mains 
Switch off T V 
Connect...

Installation and setting up 
Register additional equipment 
If not detected automatically by the T V, register 
the equipment you have connected to the T V.  Repeat the procedure for each socket group.  Select ‘OPTIONS’ 
to bring up 
‘CONNECTIONS’  menu 
Bring up ‘T V 
SETUP’ menu  Select sockets in 
a socket group 
and register 
VGA 
Y – Pb – Pr  HDMI Equipment connected via VGA socket (AV3). 
Equipment connected via Y – Pb – Pr socket (AV2–AV4 and AV6). 
Equipment connected via an HDMI socket. If you...

Set up the T V with video sources and loudspeakers. 
Loudspeakers 
Use Bang & Olufsen Power Link speakers. Use the cables enclosed with the speakers. Cables are 
available from your Bang & Olufsen retailer. 
Equipment with HDMI output  Equipment with HDMI output such as a set-top box can be connected to any available HDMI socket in the T V, regardless of 
the particular AV socket group to which you have connected the equipment. To distribute the source to another room you  must also connect the equipment...