ATT Intercom Speakerphone 955 Users Guide

SET UP SYSTEM FEATURES 
19
Assign the Line Groupfor this Phone
1Press G.
2Press -until the screen displays LINE GROUP,then press >.
3Press -or +to select the desired setting.
4Press Sto store your selection.
Turn Auto-MuteOn or Off
Choose whether sounds at this extension will be heard automatically in
response to a page(Auto-Mute Off) or only when Mis pressed.
Auto-Mute Off permits hands-free conversation and room monitoring;
Auto-Mute On protects privacy.
1Press G.
2Press -until the screen displays AUTO...

SET UP SYSTEM FEATURES
20
Turn Hold ReminderOn or Off
1Press G.
2Press -until the screen displays HOLD REMINDER,then press >.
3Press -or +to select the desired setting.
4Press Sto store your selection.
Program Home and Local Area Codes
One Home and up to five Local Area Codes can be programmed into the
unit.The Home Area Codemust be programmed in order for you to dial
numbers stored in the directoryand the Caller ID Call Listand so that you
can transfer numbers from the Call List to the directory.By...

SET UP SYSTEM FEATURES
21
Program the Centrex Console Delayed Ring Time
NOTE: This feature is for use with Centrex systems only.
Set the length of time the phone will ring before the Centrex Console
phone picks up calls to your phone.One ring is about six seconds.
1Press G.
2Press -until the screen displays CSL DELAY RING,then 
press >.
3Press -or +to select a setting.
4Press Sto confirm your selection.
Erase All Settings and Return the Phone to Default
Settings
1Press G.
2Press -until the screen...

TELEPHONE OPERATION
22
Activatecustom-callingservices
Activatetemporarytonedialing
Activatehands-freecalling forspeakerphone 
Activate hands-freecalling for headset
Redirect an incomingcall to any 955 phone
Initiate a three-partycall
Put a caller on hold
Adjustvolumeofringer,handset,speakerphone,and headset
Line-in-uselights
Linebuttons
Preventsinterruptionsduring a call
Mutethemicrophone
Rediallast number called– OR –Automatically redial anumber when the line you’recalling is busy
955_00_1ATT CIB...

NOTE:When you make a call,the phone selects the Prime Lineyou
programmed.When you answer a call,the phone automatically selects
the ringing line.If you have a private line,the phone automatically
selects that line.
Making or Answering a Call
NOTE: This phone will automatically make and answer calls in the mode
last used (handset,speakerphone or headset).Follow the directions below
to switch modes.
Handset
To make a call,lift the handset.You can dial your call manually or dial a
number from the...

TELEPHONE OPERATION
24
To answer a call,press h.Press hagain to end thecall.
To switch from handset to headsetor speakerphone,press hor
K,then replace the handset (for headset,headset must be pluggedin).
To switch from speakerphone to handset,lift the handset.(Do not
press Kor the call will be disconnected.) 
To switch from headset to speakerphone(when handset is in the
cradle),press K.
To switch from headset to speakerphone (when handset is off-hook),
press Kand replace the handset.
To switch from...

TELEPHONE OPERATION
25
Do Not Disturb
When your phone is off-hook (i.e.,you are on a call) you will hear a low
volume ring when you receive an intercomcall.In order to prevent even
this audible signal,activate the Do Not Disturb feature.When you activate
this feature you will not hear paging tones,voice paging,or incoming call
rings.Instead,the LINE lightflashes and the INTERCOM lightgoes on
tosignal an incoming call or page.If you receive an intercom call,the
INTERCOM light flashes,and the intercom...

TELEPHONE OPERATION
26
Ringer Volume
You can adjust the ringer volume while the phone is ringing.While the
line is ringing,press Volume +orVolume -to reach the desired level.
This phone has four ringer volume levels.Each time you adjust the ringer,
you will hear a sample indicating the volume level.
Turning RingerOff
You may turn the ringer for each line on or off.See “Turn the Ringer
On/Off for Each Line”in SET UP SYSTEM FEATURES.
Redial
The last number dialed on this phone (up to 32 digits) is stored...

TELEPHONE OPERATION
27
Hold
Press and release H.The light of the line on hold flashes,and a
double-beep sounds every 30 seconds to remind you the call is on hold.
(Toturn off the reminder beep,see “Turn Hold Reminder On or Off”in SET
UP SYSTEM FEATURES.)  You can replace the handset in the cradle without
disconnecting the call.The speakerphoneis automatically turned off.
To release Hold,press and release the LINE button of the call on hold.
NOTE: The system automatically disconnects a call on hold after...

TELEPHONE OPERATION
28
Temporary ToneDialing
If you have dial pulse (rotary) service,you can change from dial pulse to
touch tone dialing during a call by pressing t.This is useful if you
need to send touch tone signals for access to telephone banking or long-
distance services.
1Dial the number.
2Press and release t.Buttons pressed after this send touch
tone signals.
3After you hang up,the phone automatically returns to rotary
service.
Conference Calls
This feature lets you set up a three-party call by...