ATT DEFINITY Communications System Generic 3 For Single-Carrier Cabinets Instructions Manual

Septemb er 1995 Issue 1 I-1 
I
References
The following is a list of DEFI NI TY Generic 3 documents including a brief 
description of each document.
To order copies, refer to the a d dress on the inside front cover. For additional 
DEFINITY d o cuments, refer to the 
GBCS Publications Catalog, 555-000-010 
available from the AT&T Customer Information Center.
Basic
The following are basic documents for anyone using DEFINITY .
Provides a detailed overview of the system including descriptions of many of the...

References
I-2September 1995 Issue 1  
block diagrams. This d ocument reflects Generic 3 Version 2 software, but still 
contains relevant information.
Provides comprehensive technical descriptions of system features and 
parameters. Includes the applications and benefits, feature interactions, 
administration requirements, hard ware and software requirements, and a brief 
discussion of data communications and private networking configurations.
Provides step-by-step procedures for preparing the hardcopy...

Basic
September 1995 Issue 1 
I-3
Provides detailed descriptions of all the measurement, status, and security 
reports available in the system and is intend e d for administrators who validate 
traffic reports and evaluate system performance. This document was titled 
System Reports for earlier systems. Includes corrective actions for potential 
problems.
Provides descriptions of the procedures for installing and testing the system’s 
common equipment and adjuncts. Includes set up procedures for the...

References
I-4September 1995 Issue 1  
Provides procedures for an installation technician to convert an existing 
DEFI NI TY Generic 1, Generic 2, Generic 3 Version 1, Generic 3 Version 2, 
Generic 3 Version 4, or System 75 R1V3 to Generic 3 Version 4. Included are 
upgrade considerations, lists of required hardware, and step-by-step upgrade 
procedures. Also included are procedures to add control carriers, switch node 
carriers, port carriers, circuit packs, auxiliary c a binets, and other equipment....

Call Center
September 1995 Issue 1 
I-5
Provides detailed operating instructions for the system features on each type of 
voice terminal. Included are definitions of the voice features and user 
requirements.
Provides operating procedures for the Generic 1 Management Terminal and the 
G3 Management Terminal for Generic 3 Version 1 systems. This document is 
intended for the System Ad ministrator. Also included is information on 
administrative tasks and system b ackup procedures.
Provides cap a bility to...

References
I-6September 1995 Issue 1  
The reference includes detailed desc riptions of the call vectoring features, vector 
management, vector administration, adjunct routing, troubleshooting, and 
interactions with management information systems (including the Call 
Management System).
Provides detailed instructions on how to g enerate reports and manage the 
system and is intended for telecommunications managers wishing to use BCMS 
reports and system managers responsible for maintaining the system....

Application Specific
September 1995 Issue 1 
I-7
Application Specific
The following list of documents are application sp ecific. Refer also to the Basic 
DEFI NI TY d o c uments.
Provides detailed descriptions of the difference between features and 
administrative forms for systems Generic 2 to Generic 3 Version 4 and is 
intended for AT&T personnel and customers involved in planning u p grades and 
migrations from an older system. Includes descriptions of new administrative 
commands. 
Provides...

References
I-8September 1995 Issue 1  
Provides procedures for installation, administration, and maintenance of the 
CallVisor LAN Gateway application and is intended for system administrators, 
telecommunications managers, Management Information System (MIS) 
managers, LAN managers, and AT&T personnel. The LAN Gateway application 
provides ASAI functionality using 10Base-T Ethernet rather than BRI as a 
transport media.
Provides information for use by agents after they have completed Automatic Call...

Application Specific
September 1995 Issue 1 
I-9
Provides operating instructions for the attendant console. Included are 
descriptions of the console control keys and functions, call handling, basic 
system troubleshooting information, and routine maintenance procedures.
Provides an overview of the features available for use by the lod ging and health 
industries to improve their property management and to provide assistance to 
their emp loyees and clients. Included are brief d efinitions of many of the...

 Issue 1   September 1995ABB-1 
ABBAbbreviations
A
AC
Alternating  Current
ADU
Asynchronous Data Unit
AMI
Alternate Mark Inversion
ANSI
American National Standard s Institute (U.S.A.)
AWG
American Wire Gauge
B
BCMS
Basic Call Management System
BRI
Basic Rate Interface
C
CAS
Centralized Attendant Service or Call A c counting  Sys-
tem
CBC
Coupled Bonding Conductor
CCITT
 Consultative Committee for International Telephone and 
Telegraph
CC
Country Code
CEPT1
European Conference of Postal and Telecommunic...