AT&T Rugby 2 User Manual

Call Functions       26 3.
The recipient receives a Video Share pop-up to either 
Accept or Reject the Video Share call. They should press 
Accept to continue or Reject to reject the invitation.
4.If the Auto Record option is On, REC displays on the upper 
right of the screen.
Note: The Auto Record option must be enabled for this popup to display. For more information, refer to “Video Share Settings”  on page 144.
5.To end the video share call, press Stop.
6.A pop-up message displays Video Share has...

27
Save to Address Book: allows you to save the number to your 
Address Book on either the phone or SIM card.
Send Message: allows you to send a Text or Multimedia message to 
the caller.
Delete: allows you to delete the Selected call or All calls.
Add to Reject List: allows you to add the sending number to your 
Reject List.
Viewing Missed Calls
The number of missed calls displays on both the Idle screen and 
the front panel LCD. To view the number details:
1.If the phone is closed, open the phone and...

Call Functions       28 3.
At the Create Message screen, use the Alphanumeric keys 
to type in a message or press the Insert soft key to add 
items such as Picture, Video, Sound, Templates, Emoticon, 
Take Picture, Record Video, Record Sound, Favorites URL, 
or Contact Info.
4.Press the Send to soft key when you are done with your 
message
5.At the Recipient List screen, use the numeric keypad to 
add additional contact phone numbers, if necessary.
6.Press the Send soft key to initiate delivery.
Note:...

29–
hh:mm:ss: shows the duration of the call in hours, minutes, and 
seconds. 
Call Back 
To call back a missed call number:
1.Press the View soft key. The most recently missed call 
displays. 
2.Scroll through the list of missed calls.
3.Highlight the number to call back and press the Options 
soft key. Select Call and press the Select soft key or the 
 key.
– or –
Highlight the number and press the  key.
Options During a Call
Your phone provides a number of control functions that you can 
use during a...

Call Functions       30
Press Options soft key, highlight New Call and press the 
Select soft key or the   key. Once connected, both 
calls display on the screen.
Note: The caller currently on hold displays as greyed text on the screen.
When you are engaged in an active call and also have a call on 
hold, you may switch between the two calls. Switching calls 
automatically places the second call on hold.
To switch between the two calls:
1.Press Options soft key. Use the Navigation keys to 
highlight Swap...

31–
Calendar: Temporarily accesses your calendar while maintaining the 
active call.
–Notes: Temporarily accesses your notes while maintaining the 
active call.
–Whisper Mode On/Off: Increases the microphone sensitivity level. 
Used in quiet environments such as theaters, meetings, etc.
–Key tone on/off: Silences/mutes the key tones when on the call.–Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the 
selected contacts. You can send these DTMF tones as a group, only if 
the network supports...

Call Functions       32
Example: You wish to say something to person in the room, but do not want the person on the phone to hear you.
To switch the microphone off temporarily with a single active call:
1.Press the Mute soft key.
2.Press the Unmute soft key to switch the microphone back 
on.
To switch the microphone off temporarily with one active call and 
one on hold, or, one active call with Video Share enabled.
1.Press the Options soft key, then select Mute. 
2.Press the Options soft key, then select...

331.
Press the Options soft key. Highlight End and press the 
Right Navigation key.
2.Highlight Active Call, Held Call, or All Calls and press the 
Select soft key or the   key.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of 
incoming calls and place them on hold. If this service is 
supported by the network, all calls can be joined together. You 
are notified of an incoming call by a call waiting tone.
Note: The Join option combines all of the...

Entering Text       34
Section 5: Entering Text
This section outlines how to select the desired text input mode 
when entering characters into your phone. This section also 
describes how to use the T9 predictive text entry system to 
reduce the amount of key strokes associated with entering text.
Using the Text Input Methods
The Input Method option switches the key entry functions from 
ABC (Alphabetic), T9 Alphabetic (predictive text mode), 123 
(Numeric Mode), and Symbols Mode.
ABC (Alphabetic) Input...

35
Changing the Text Input Mode
When you are in a field that holds characters (such as in a text 
message), the text input mode indicator displays. Use the 
following steps to change the text input mode:
1.To change the text input mode, press the   key.
– or –
If you prefer the T9 Input Method, press the Options soft 
key and select Te x t  M o d e. Choose your preferred text 
input mode.
2.After you have selected an input method, keep pressing 
the   key to choose from the following options:
If in...