AT&T Htc Tilt 2 User Manual

Using Phone Features  61

7. When the first call is connected, tap the photo of the second participant to dial the second call. The first call is automatically put on hold.
8. When the second call is connected, tap the Join button (  ) to add it to the conference call and then dial the next participant.
Repeat this same process until all participants are added and connected to the conference call.
Tip If you prefer to do the conference call in portrait view, do not slide open the hardware keyboard. When...

6  Using Phone Features

Managing the conference callWhile a conference call is in progress, you can do the following:
To manage the conference call in landscape viewTo talk in private with a participant and put the others in the conference call on hold, tap the participant’s photo and then tap Private.
To swap between a private call and the conference call, tap the dim area or tap Swap.
Tap Join to add a private call back to the conference call.
Tap End Call to end a private call and return to the...

Using Phone Features  6

To manage the conference call in portrait view
View contact details.
Talk in private to this participant only and put the others in the conference call on hold.
End the call with this participant.
Tap a participant from the conference call and then tap one of these buttons:
To swap between a private call and the conference call, tap the dim area that shows “On Hold” or tap Menu > Swap. 

64  Using Phone Features

To turn on the speakerphone during a conference callWhile a call or conference call is in progress, you can turn on the speakerphone by simply placing your device face down.
Your device provides crystal-clear sound quality and voice reception during conference calls. When the speakerphone is on, your device also enables the dual microphone to enhance your voice quality and reduce noise.
When you are using the speakerphone and you  need to temporarily mute the dual microphone so...

Using Phone Features  65

4. Select the check boxes of the sender and recipients who you want to join in your conference call and then tap Conference.
Tap Conference when you are ready to start the conference call.
Select the check boxes of the participants.
Tap here to close or expand the “To” or “Cc” recipient list.
5. Do steps 5 to 7 in “To select participants and start a conference call” to dial  each participant and add each connected call to your conference call.
6. To manage your conference call,...

66  Using Phone Features

2.7 Turning the Phone Function On and Off
In many countries, you are required by law to turn off the phone while on board an aircraft.
To enable or disable the phone function1. On the Home screen, slide to the Settings tab, and then tap Communications.
2. Tap the OFF/ON slider at the right side of the Phone option to enable or disable the phone function.
To enable or disable Airplane ModeAnother way to turn off the phone function is to switch your device to Airplane Mode. When...

Using Phone Features  67

2. When prompted to initialize PTT, tap Yes.
3. Enter your register name (up to 0 characters), and then tap OK.
A PTT initialization in process message appears. After the initialization process is completed, you receive a notification that the PTT service is successfully initialized. The Available icon (  ) appears on the Title bar.
Opening PTTTap Start > Apps > Push to Talk. The PTT main screen appears.
Open the PTT Contact screen.Add a new PTT contact.
Set your screen...

68  Using Phone Features

An invitation is sent to the PTT contact and the “Invitation in Progress” icon appears on the screen.
When the PTT contact accepts the invitation, they are automatically added to your PTT contacts list. The contact’s icon shows their status. See “PTT status” later in this chapter.
To create a group1. On the PTT main screen, tap Add Group.
2. On the PTT New Group screen, enter the group name and tap OK.
3. Select the members of the group from the list. Selected members are...

Using Phone Features  69

To make a group call1. On the PTT Contacts screen, select the group you want to call.
2. Press and hold the PTT button and after the sound, begin talking with your group.
3. Release the PTT button when you are finished speaking.
4. To end the call, press the END button.
To make a Quick Group call1. On the PTT Contacts screen, select an available contact.
2. Tap Menu > Quick Group.
3. Select the contacts that you want to add to the quick group call.
4. Press and hold the PTT...

70  Using Phone Features

Changing the PTT settings
PTT statusThe following icons indicate your PTT status as well as the PTT status of your contacts and groups.
IconDescription
Available You can send and receive PTT calls instantly.
Silent/Vibrate You will be alerted of the incoming PTT call and you can choose to accept or reject the call.
Do Not Disturb  Blocks all incoming PTT calls. You can, however, still make an outgoing PTT call.
Unavailable Appears when you are out of the PTT coverage area, or...