AT&T Htc Tilt 2 User Manual

Using Phone Features  51

Tip You can also start a conference call from the Select Contacts to Call screen. See “Starting a conference call from an email“ later in this chapter for details.
4. If you made a call to the sender or the phone number contained in the email message, you can directly view the email message on the Phone screen while the call is in progress.
 
When the call is made from an email message, an email indicator is shown on the Keypad button. Tap this button to view the message...

5  Using Phone Features

If you made a call from a meeting request email, you can view the meeting details in the email directly on the Phone screen while the call is in progress. An email indicator is shown on the Keypad button (  ). Tap this button to view the meeting details.
Making an emergency callEnter the international emergency number for your locale, and press the TALK/SEND button on your device.
Tip  Additional emergency numbers may be included in your SIM card. Contact your wireless...

Using Phone Features  5

2.2  Answering and Ending Calls
When you receive a phone call, the Incoming Voice Call screen will appear, allowing you to either answer or ignore the call.
Accepting or rejecting an incoming voice callTo answer a callDo any of the following:
Fully slide the center button to the left of the Answer/Ignore bar.
Press the TALK/SEND button.
To reject a callDo any of the following:
Fully slide the center button to the right of the Answer/Ignore bar.
Press the END button.
•
•
•...

54  Using Phone Features

Using the call functionsWhen a call is in progress, use the call function buttons to put a call on hold, dial another contact for a phone conference, enter notes about the conversation, and more.
Call functions
Contact details. See “The Contact Details screen” in 
Chapter .
To swap between two callsYour device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call,...

Using Phone Features  55

To use the speakerphoneDuring a call, do one of the following to turn the speakerphone on or off:
Tap  to turn the speakerphone on. Tap this button again to turn the speakerphone off.
Placing your device face down automatically turns on the speakerphone. To turn the speakerphone off, place your device face up.
You can also press and hold the TALK/SEND button during a call to turn the speakerphone on or off.
Note The speakerphone icon (  ) appears in the title bar when the...

56  Using Phone Features

Always. Always reduces ambient noise during the entire course of your phone call.
Never. Turns off noise reduction.
Notes • If you want to change the noise reduction setting to Automatically, make sure to do this before starting a call.
 • Noise reduction is not used when you have a wired or Bluetooth headset connected.
To open Notes while in a callTap Menu > Create Note, or pull out the stylus.
To view or create appointments during a callTap  to open the Calendar and browse...

Using Phone Features  57

2.3 Using Call History
The missed call icon  icon appears in the title bar when you missed a call. Use the Call History tab to check who the caller was, or view all your dialed numbers and received calls. To open the Call History tab, tap Call History or Missed Call on the TouchFLO D Home tab.
Received call
Dialed number
Missed call
Filter or clear the Call History tab.
Open the Call History tab of the Contact Details screen and view all calls you exchanged with the...

58  Using Phone Features

2.4 Speed Dial
Use Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 4 in Speed Dial, you can tap and hold the number 4 key on the Phone screen keypad to dial the contact’s number.
To create a Speed Dial entry1. On the Phone screen, tap Menu > Speed Dial.
2. Tap Menu > New.
3. Tap a contact, and then select the phone number of the contact that you want to the speed dial key.
4. In Location, select an available key...

Using Phone Features  59

4. When the called party accepts the invitation, point the device’s camera at your subject. The called party receives the streaming live video.
2.6 Straight Talk™
Your device features Straight Talk™, a technology that integrates messaging, voice, and conference calling, allowing you to seamlessly transition from a message to a single call or multi-party conference call. With dual microphone and speaker that enhance voice quality and reduce noise, Straight Talk turns your device...

60  Using Phone Features

4. Select conference call participants by selecting the check boxes of contacts or phone numbers, and then tap Conference. 
The participants list is then displayed.
Tap these buttons if you want to choose from other stored phone numbers and use them to call the participants.
Tip To remove a participant before starting the conference call, tap Keypad and clear the check box of this participant.
5. Slide open the hardware keyboard so that your device will display the Conference...