Asus Router WL-500gp V2 User Manual

WL-500gP V2 Wireless Router User Manual
38

3. Click Set up a connection or network. 

WL-500gP V2 Wireless Router User Manual
39

4. Choose Set up a wireless router or access point, then click Next.
5. Click Next. 

WL-500gP V2 Wireless Router User Manual
40

6.  In the screen that appears, type a network name in the Network name box, then click 
Next. A passphrase is generated for the WPA security.
7.  Click Next. If you want to use security methods other than WPA-Personal, click Show 
advanced network security options.  

WL-500gP V2 Wireless Router User Manual
4

8.  Choose a security method and click Next.
9.  A screen prompts you to enter the PIN for the device. Enter the PIN, whic\
h is located on 
the sticker posted on the device, then click Next.  

WL-500gP V2 Wireless Router User Manual
42

10.  Choose a file and printer sharing option and click Next.
 A screen appears showing that the set up is complete as shown below. 

WL-500gP V2 Wireless Router User Manual
43

11. From the above screen you can choose to View settings or, Save settings to a USB 
flash drive. The respective screens are shown below.
View settings screen
Save settings to a USB flash drive screen 

WL-500gP V2 Wireless Router User Manual
44

12. When Save settings to a USB flash drive screen appears, plug a USB flash drive into 
your computer, then select the drive from the Save settings to box and click Next. The 
settings start to be saved into the USB drive. 
  After the saving process is completed, a screen appears to instruct you \
to add computer 
or other devices into the network. Follow the instructions to add comput\
ers and devices 
into your network. 

WL-500gP V2 Wireless Router User Manual
45

8. Troubleshooting
Cannot access to web browser for router configuration
1 .   O p e n   a   w e b   b r o w s e r   a n d   o p e n "Internet Options" dialog box.
2.  Click  on  "Delete  Cookies"  and  "Delete Files".
Cannot Establish Connection via Wireless
 Out of Range:
 •  Put the router closer to the wireless client.
  •  Try to change the channel setting.
  Authentication:
 •  Use wired connection to connect to router. 
  •...

WL-500gP V2 Wireless Router User Manual
46

Internet is not accessible
• Check the lights on ADSL modem and the Wireless Router
•   Check whether the "WAN" LED on the Wireless Router is ON. If the LED is not ON, 
change the cable and try again.
When  ADSL  Modem  "Link"  light  is  ON  (not  blinking),  this  means  Internet 
Access is Possible.
• Restart your computer.
• Refer to the Quick Setup Guide of the wireless router and reconfigu\
re the settings.
• Check whether the WAN LED on...

WL-500gP V2 Wireless Router User Manual
47

9. Appendix
FCC Warning Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference that    may cause undesired operation.
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  class  B  digital device, pursuant to part 15 of the FCC Rules....