Asus Router WL-500gp V2 User Manual

WL-500gP V2 Wireless Router User Manual
8

2. After clicking Free Trial, you are directed to the homepage of www.DynDNS.org, where you can register and apply for DDNS service.
  Read  the  policy  and  select 
"I have read...".
3.  Enter your user name, 
e-mail address, password, then click Create Account.
4.  A message prompts 
out informing that your account has been created. An E-mail is sent to your mailbox. Open your mailbox and read the mail.
9. 
Click 
Apply then click Finish.
10....

WL-500gP V2 Wireless Router User Manual
9

5. You  can  find  the  activation l e t t e r  i n  y o u r  E - m a i l  b o x . Click the hyperlink.
6. T h e  l i n k  d i r e c t s  y o u  t o  a login page. Click login.
7. E n t e r  t h e  u s e r  n a m e  a n d password then click Login.
8.    A f t e r  l o g g i n g  i n ,  y o u  c a n see this welcome message.
9.  Select 
Services tab.
10.  Click 
Add  Dynamic  DNS Host . 

WL-500gP V2 Wireless Router User Manual
20

11. Enter  the  host  name  then click Add Host.
12.  You  can  see  this  message 
w h e n  y o u r  h o s t n a m e  i s successfully created.
13. Fill  the  account  information into the DDNS setting fields of your wireless router. 
14.  Click 
Finish.
15.  C l i c k 
S a v e  &  R e s t a r t  t o restart  the  wireless  router and activate the settings.
16.  Verify whether DDNS is working. Click 
Start menu and select Run....Type  cmd and click OK to open...

WL-500gP V2 Wireless Router User Manual
2

6) Setting up Bandwidth Management
Bandwidth  Management  provides  a  mechanism  that  controls  the  traffic  of  you 
network. To set up bandwidth management:
1. Click Basic Config page in Bandwidth Management folder. In this page you can see four buttons including Gaming Blaster, Internet Application, WL-500gP V2 FTP Server, and VOIP/Video Streaming . In this page, you can click each item to set its priority higher. After  you  click  each  item,  the...

WL-500gP V2 Wireless Router User Manual
22

WL-500gP V2 FTP Server
After you applying the WL-500gP V2 FTP Server settings, a screen appears 
asking you to do further configuration: 

WL-500gP V2 Wireless Router User Manual
23

2.  You can also configure the bandwidth manually by clicking "User Specify Services". Input 
the IP address, destination port and choose the priority status from the drop-down list.
VOIP/Video Streaming 

WL-500gP V2 Wireless Router User Manual
24

ASUS  WL-500gP  V2  Wireless  Router  provides  two  USB2.0  ports  for  connecting 
USB  storage,  USB  camera,  and  USB  printer,  therefore,  you  can  monitor  the 
working  environment,  share  data  and  printer  with  both  wired  and  wireless  users  in 
your network. 
Warning: Before  unplugging  the  USB  storage  disk  from  WL-500gP  V2,  you  must eject the disk in Status & Log -> USB page to prevent data corruption.
Note: Before  applying...

WL-500gP V2 Wireless Router User Manual
25

2. Click Add  to  add  a  share folder.
3. Select the folder you want to share from Folder Manager and click Ok. To  create  a  share  folder,  input  the folder  name  in Add  Folder  field and press Add.
4. Define  the  access  right  for the  share  folder  by  appoint U s e r  N a m e  a n d A c c e s s R i g h t.  C l i c k A d d  t o  a d d the access right rule. When f i n i s h e d ,  c l i c k A p p l y  t o save the configuration.
6.  Click 
Finish....

WL-500gP V2 Wireless Router User Manual
26

2) Setting up FTP site
WL-500gP V2 can also serve as an FTP site. You can make your FTP site accessible 
by  all  users,  or  set  up  access  policy  to  restrict  anonymous  login. To  use  this  feature, 
you  need  to  plug  a  USB  storage  disk  to  the  USB2.0  port  on  the  rear  panel  of  WL-
500gP V2. Make sure the hard disk is formatted and partitioned properly.
1. To  allow  anonymous  login:  Set Network  Neighbourhood  Mode to Share all...

WL-500gP V2 Wireless Router User Manual
27

3) Sharing USB printer
You  can  connect  a  compatible  USB  printer  to  the  USB2.0  port  of  WL-500gP  V2  to 
share  the  printer  with  your  LAN  users.  Follow  the  procedures  below  to  setup  your 
computers to utilize the printer server function of WL-500gP V2.
Installing USB printer
Plug  your  USB  printer  to  the  USB2.0  port  on  WL-500gP  V2  rear panel.  To  verify  whether  your  printer  is  properly  installed  and  to WL-500gP  V2...