Asus Router WL-500gp V2 User Manual

WL-500gP V2 Wireless Router User Manual
8

PPTP user
If you are using PPTP services, select ADSL c o n n e c t i o n  t h a t  r e q u i r e s  u s e r n a m e , p a s s w o r d  a n d  I P  a d d r e s s . F i l l  i n  t h e u s e r n a m e ,  p a s s w o r d  a n d  I P  a d d r e s s provided  by  your  ISP  into  the  fields.  Click Next to continue.
Static IP user
If  you  are  using  ADSL  or  other  connection type that uses static IP address, select ADSL or  other  connection  type  that  uses...

WL-500gP V2 Wireless Router User Manual
9

4. Input four sets of WEP keys in the WEP Key  fields  (10  hexadecimal  digits  for W E P  6 4 b i t s ,  2 6  h e x a d e c i m a l  d i g i t s for  WEP  128bits).  You  can  also  let  the system  generate  the  keys  by  inputting a  Passphrase.  Record  the  Passphrase and  the  WEP  keys  in  your  notebook, then click Finish.
  For  example,  if  we  select  WEP  64bits 
encryption  mode  and  input  11111  as the  Passphrase,  the  WEP  Keys  are...

WL-500gP V2 Wireless Router User Manual
0

3)  Set  the  authentication  and  encryption  of your  WLAN  card  the  same  with  those  at WL-500gP  V2.  In  the  previous  steps  the Key  Length  is 64  bits, Passphrase  is 11111 Click Next to continue.
1)  Select Connect  to  an  existing  wireless L A N  ( S t a t i o n )  r a d i o  b u t t o n  a n d  c l i c k Next to continue.2)  
One Touch Wizard searches and displays t h e  a v a i l a b l e  A P s  i n  t h e A v a i l a b l e Networks...

WL-500gP V2 Wireless Router User Manual


7. Configuring advanced features
To view and adjust other settings of the wireless router, enter  the  Web  configuration  page  of  WL-500gP  V2. Click  on  items  on  the  menu  to  open  a  submenu  and follow the instructions to setup the router. Tips show up when you move your cursor over each item.
Configuring WLAN card with Windows® WZC service
If  you  use  non-ASUS  wireless  card,  you  can  set  up  the  wireless  connection  with  Windows®...

WL-500gP V2 Wireless Router User Manual
2

4. Wireless router features
This chapter provides setup examples of some frequently used router features. You 
can setup these features via your Web browser.
1) Choosing an appropriate operation mode
A S U S  W L - 5 0 0 g P  V 2  W i r e l e s s  R o u t e r  s u p p o r t s  t h r e e 
operation  modes:  home  gateway,  router,  and  access  point. 
C l i c k S y s t e m  S e t u p  - >  O p e r a t i o n  m o d e  t o  o p e n  t h e 
configuration...

WL-500gP V2 Wireless Router User Manual
3

2) Setting up wireless encryption 
W L - 5 0 0 g P  V 2   p r o v i d e s   a   s e t   o f   e n c r y p t i o n   a n d 
authentication  methods  to  meet  the  different  demands 
of  home,  SOHO,  and  enterprise  users.  Before  setting  up 
encryption  and  authentication  for  WL-500gP  V2,  contact 
your network administrator for advice.
Click Wireless -> Interface to open the configuration page.
Encryption
The  encryption  modes  supported  by...

WL-500gP V2 Wireless Router User Manual
4

2. Select Yes  to  enable  virtual server.  For  example,  if  host 192.168.1.100 is FTP server which  is  to  be  accessed  by Internet  user,  it  means  all packets  from  Internet  with destination port as 21 are to be  directed  to  the  host.  Set Well-known  Application  to FTP. Port range to 21, Local IP  to  the  host  IP,  Local  Port to 21, Protocol to TCP.
3.  Click 
Finish.
4.  C l i c k 
S a v e  &  R e s t a r t  t o restart  the  wireless...

WL-500gP V2 Wireless Router User Manual
5

1. Click Virtual DMZ in the NAT Setting menu.
2.  Enter  the  IP  address  of  the 
host and click Finish.
3.  Click 
Save  &  Restart  to restart  the  wireless  router and activate the settings.
5) Setting up DDNS
DNS  enables  host  who  uses  static  IP  address  to  associate  with  a  domain  name; 
for  dynamic  IP  user,  they  can  also  associate  with  a  domain  name  via  dynamic 
DNS  (DDNS).  DDNS  requires  registering  and...

WL-500gP V2 Wireless Router User Manual
6

3. Select  WWW.ASUS.COM  for  detail  setting. You  are  not  necessary  to  key  in User  Name  or E-mail  Address  and Password or  DDNS  Key  if  you  select  this  server.  Or  you  can  select another  website  to  register  and  apply  for  DDNS  service.  Please  refer  to  Page  18  to  see another service setting.
4. Enter  the  host  name  then  click Query. The  format  should  be  xxx.asuscomm.com.  (xxx  is what you want to set up a host...

WL-500gP V2 Wireless Router User Manual
7

6. If host name’s format does not follow xxx.asuscomm.com, you will see this message. Please re-enter your host name again.
7. If you want to change host name, please enter new host name and click Query. You can see this message when your host name is successfully updated.
8.  If  the  host  name  had  been  registered,  you  will  see  this  message.  Please  re-enter  your  host name again.