Asus Router WL-320gE User Manual

1. Introduction
ASUS 802.11g Access Point11
Chapter 1 - Introduction

1..3  Roaming Between ASUS APs
If there are multiple ASUS APs on the network, then a wireless mobile client 
may seamlessly roam from one ASUS AP to another.
Each  ASUS  AP  creates  its  own  wireless  cell  or  coverage  area.  This  is 
also  known  as  a  Basic  Service  Set  (BSS). Any  wireless  mobile  client  can 
communicate  with  a  particular  ASUS  AP  if  it  is  within  the  ASUS  AP’s 
coverage area.
If the cells...

1. Introduction
Chapter 1 - Introduction
12ASUS 802.11g Access Point

1.  Getting to Know the WL-320gE
1..1   Front panel features
The ASUS WL-320gE Access Point includes LED indicators which show 
the system, LAN, wireless network, and link status.
PWR (Power)
OFF:    No power or performing boot sequence
ON:   System ready
Blinking: Firmware upgrade failed
LAN (Ethernet Network)
OFF:   No power
ON:   Physical connection to an Ethernet network
Blinking: Transmitting or receiving data (through...

1. Introduction
ASUS 802.11g Access Point13
Chapter 1 - Introduction

1..2  Rear panel features
The rear panel contains the Ethernet, the DC port, and the Reset button.\
LabelDescription
ETHERNETThe Ethernet port connects to an Ethernet device such as to a switch or to a router.
RESETPress the Reset button to restore to factory default settings.
DCThe DC port connects to the power adapter.
LINK (Link Status)
Operation ModeAP/Repeater/Bridge/GatewayClient
OFFClient not associatedNot associated to...

Chapter 2 - Hardware Installation
2. Hardware
1ASUS 802.11g Access Point

2.   Installation
This chapter describes the installation procedure for the ASUS 802.11g AP 
and includes a description of the LEDs found on the unit.
2.1  Installation Procedure
Follow these steps to install the ASUS 802.11g WLAN AP.
1.  Determine the best location for the ASUS 802.11g WLAN AP. Keep in 
mind the following considerations:
•  The maximum length of the Ethernet cable that connects the Access 
Point to the...

2. Hardware
Chapter 2 - Hardware Installation
ASUS 802.11g Access Point1

4.  Attach one end of the AC power adapter to the back of the ASUS 802.11g 
AP and the other end to a power outlet.
2.2   Wall Mounting Option
The  ASUS  WL-320gE  Access  Point  is  designed  to  sit  on  a  raised  flat 
surface like a file cabinet or a book shelf. The unit may also be converted 
for mounting to a wall.
To mount the ASUS 802.11g WLAN AP  
to a wall:
1.  Look  on  the  underside  for  the  two 
mounting...

3. Software
16ASUS 802.11g Access Point
Chapter 3 - Software Configuration

3.   Software Configuration
3.1   Configuring the ASUS 802.11g AP
The ASUS 802.11g AP can be configured to meet various usage scenarios. 
Some of the factory default settings may suit your usage; others may need 
changing. Prior to using the ASUS 802.11g AP, you must check the basic 
settings to guarantee it will work in your environment. 
Configuring  the  ASUS  802.11g  AP  is  done  through  a  web  browser.  You 
need a...

3. Software
ASUS 802.11g Access Point17
Chapter 3 - Software Configuration

Advanced IP Settings
If you want to set your IP address manually, the following default settings 
of the ASUS 802.11g AP should be known:
• IP address 192.168.1.1  
• Subnet Mask 255.255.255.0. 
If you set your computer’s IP manually, it needs to be on the same segment.  
For example:
•  IP address 192.168.1.xxx (xxx can be any number between 2 and 254 that is 
not used by another device)
•  Subnet Mask 255.255.255.0 (same as...

3. Software
18ASUS 802.11g Access Point
Chapter 3 - Software Configuration
3.2  ASUS WLAN Utilities
Installing the UtilityTo  install  the ASUS  WLAN  Utilities  in  Microsoft®  Windows,  insert  the  support  CD  in  the  CD 
drive. If Autorun is disabled, run setup.exe from the root directory of the suppor\
t CD.
(2) Click Next.
(3)  Click Next to  accept  the  default 
destination folder or click Browse to 
specify another path.
(4)  Click Next to  accept  the  default 
program  folder  or  enter...

3. Software
ASUS 802.11g Access Point1
Chapter 3 - Software Configuration
WLAN Utilities
After installation, you can launch the utilities through the Start menu.\
Wired Ethernet Connection
Besides using a network hub, you can also connect a LAN cable from your 
computer to the ASUS 802.11g AP using either a straight or crossover cable 
since the ASUS 802.11g AP has auto-crossover capability. 
Wireless Connection
If  you  are  using  a  Notebook  with  a  wireless  adapter,  you  can  connect  to...

3. Software
20ASUS 802.11g Access Point
Chapter 3 - Software Configuration
WLAN Utilities

If  your  computer’s  IP  is  not  on  the 
same  subnet  as  the  ASUS  802.11g 
AP (192.168.1.X), you will be asked 
to  change  it.  The  last  digit  in  the  IP 
address can be any number from 2 to 
254 that is not used by another device. 
Gateway is not required.
Manually Entering the Address
You can also open your PC’s web browser and enter the default IP address 
of the ASUS 802.11g AP : http://192.168.1.1...