Asus Router DSL-N13 User Manual Czech Version

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
3

3.  A  message  prompts  out 
asking you to check your 
mailbox for the activation 
letter. Open your mailbox 
and read the mail.
4.  You can find the letter in 
your  E-mail  box.  Click 
the hyperlink.
5.  The link directs you to a 
login page. Click	login.
6.   E n t e r  t h e  u s e r  n a m e 
and  password  then  click	
Login.
7.  A f t e r  l o g g i n g  i n ,  y o u 
can  see  this  welcome 
message.
8.  Select Services tab.
9.  C l i...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
40

11. Y o u   c a n   s e e   t h i s 
m e s s a g e  w h e n  y o u r 
hostname is successfully 
created.
3.   Press Save/Apply to save and activate the settings.
4.  To  verify  whether  DDNS  is  working,  click Start  menu  and  select Run....Type cmd 
and click OK to open the CLI console.
5.  Type ping 	account.dyndns.org  (your  DDNS  domain  name).  If  you  can  see  the 
reply like what is shown in the picture, DDNS is working correctly....

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
41

Setting	up	default	gateway
This section allows to manually setup default gateway of Internet connection. 
1.  Click Advanced 	Setup 	-> 	Routing 	-> 	Default 	Gateway to open the configuration page. 
2.   By  default,  automatic  assigned  default  gateway  is  enabled,  that  is,  the  router 
accepts  the  first  received  gateway  assignment  from  ISP.  If  your  ISP  specifies  a 
gateway,  uncheck Enable 	Automatic 	Assigned 	Default 	Gateway...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
42

Setting	up	routing	protocol	-	RIP
RIP stands for Rounting Information Protocol. DSL-N13 supports RIPv1 and RIPv2.
1.  Click Advanced 	Setup 	-> 	Routing 	-> 	RIP to open the configuration page. 
2.   To activate RIP, select Enabled radio button for global RIP mode. 
3.  To  configure  an  individual  interface,  select  the  desired  RIP  version  and  operation 
and check the Enabled checkbox for the interface. 
4.  Press Save/Apply to save and...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
43

Instant	 AiDisk	Sharing
 To let other people to log in your FTP without using any account ID and password:
1. Click USB 	Application > FTP 	Server > FTP 	Settings to open the FTP 	settings page (see 
figure below). This page displays the default settings.
2.  Click Save/Apply  (see  figure  above)  to  save  and  apply  the  default  settings.    By  default, 
DSL-N13 will create two shared folders: ftp_pub and ftp_prt. 
  Now,  people  can  access...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
44

2. Click USB 	Application  > FTP 	Server  > User 	List  to  open  the User 	List  page  (see  figure 
below).
3.  Click Add 	from the User 	list 	page to open the User 	List 	Add page (see figure below) and to 
add users. If you want to remove a user,  check the Remove box behind that  user and click 
the Remove button.
4.  On the User 	List 	Add page (see figure above), key in the User 	Name and Password for an 
allowed user.
5.   From the Login...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
45

ASUS	DDNS	Service:	Set	up	 An	Easy-to-Remember	Host	Name
1. Click Advanced	 setup  > Dynamic	DNS  to  open  the Dynamic	DNS  page  (see  figure 
below). 
2. Click Add  from  the Dynamic	 DNS  page  (see  figure  above)  to  open  the Add	dynamic	
DDNS page. (see figure below).
3. Input  your  preferred  name  in  the Hostname  bar.  Click Check  button  to  see  if  your 
preferred name is still available.
4. Choose  your  current  Internet...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
46

DSL-N13 offers two USB2.0 ports for setting up FTP server and sharing USB printer.
FTP	server	function
Before setup, you need to prepare a USB disk for FTP storage. 
Setting	up	FTP 	server
To setup FTP server:
1.  Plug  your  USB  storage  into  the  USB2.0  port  on  the  DSL-N13  rear  panel. Then  click 
USB 	Application 	-> 	FTP 	Server in the left side menu to open the configuration page.
USB	applications
2.   Set Enable 	FTP 	Server 	to Yes....

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
47

Setting	up	FTP 	account
You can set up 12 accounts for your FTP site. 
1.  Click USB 	Application 	-> 	FTP 	Server 	-> 	User 	List in the left side menu to open the 
configuration page. Click Add to create new FTP account.
2.   Define  the User 	name, Password  for  the  new  account.  Setup  the Max. 	Login  to 
restrict the access request. Define the access right to the account. 
3.   Click Apply 	to save the new account.
4.  Click Save to save...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
48

Sharing	USB	printer
You  can  plug  your  USB  printer  to  the  USB2.0  port  of  DSL-N13  to  share  it  within  your 
LAN.  After  you  plug  a  printer  to  the  USB  port,  you  can  see  the  status  of  printer  by 
clicking USB	Application 	-> 	Printer 	Status.
1.   Run Add  Printer  Wizard  from Start 	
->	Printers 	and 	Faxes 	-> 	Add 	a 	
printer.
2.   Select Local 	printer 	attached 	to 	
this 	computer and click	Next.
3.   Select...