Asus Router DSL-N13 User Manual Czech Version

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
2

3.  Setting IP address
Click Advanced 	Setup 	-> 	LAN.  Set  DSL-N13 IP 	address  to 1 2.168.1.1,  select 
Enable 	DHCP 	Server and set Start 	IP 	address to 1 2.168.1.4. Click Save/ 	Reboot.
4.   Setting WDS
Click Wireless 	-> 	Wireless 	Bridge.  Select Wireless 	Bridge. 	You  can  select 
Enabled(Scan)  to  find  WL-500gD  and  WL-500gP.  If  the  stations  are  on  the  list,  check 
the checkbox and click Save/Apply.
If you cannot...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
30

Wireless	advanced	settings
Click Wireless 	-> 	Advanced to configure advanced features of the wireless router such 
as communication channel, data rate and WMM.
If you do not know the meaning of these items, use the default setting.
WDS setup (WL-500gD and WL-500gP)
Set up WL-500gD and WL-500gP according to the table on Page 26.
1.   Wireless Setting
Set  WL-500gD,  WL-500gP  wireless  channel,  authentication,  encryption  and  keys 
the same as...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
31

Network	security
This chapter shows how to set up security defence for your local area network.
Setting	up	access	right	to	DSL-N13
To  protect  your  wired  and  wireless  LAN,  we  recommend  setting  up  access  protection  
so as to prevent DSL-N13 from being viewed or modified by unauthenticated users.
Service	restriction
DSL-N13  provides  a  Service  Control  List  (SCL)  that  can  enable  or  disable  services 
which  are  used  to  access...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
32

Password	protection
DSL-N13  ADSL  also  provides  three  levels  of  access  right:  admin,  support,  and  user. 
Account  "admin"  has  full  access  to  change  and  view  configuration  of  the  router, 
"support"  is  for  ISP  technician  to  view  and  keep  maintenance  to  the  router,  "user"  can 
view the router settings and statistics, as well as to update the software. 
1.  Click Management 	-> 	Access...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
33

1.  Click Advanced 	Setup 	-> 	NAT 	-> 	Port 	Triggering in the left side menu to open the 
configuration page. Click Add to create a new rule.
2.   Select the service you want to configure and let the system automatically fill in the 
external  and  internal  port  number  and  protocol  type.  You  can  also  select Custom 	
Server radio button to designate a certain known server.
3.  Fill  in  trigger  port  (range)  and  protocol,  open  port...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
34

Setting	up	DMZ	host
The  function  of  DMZ  is  similar  to  that  of  virtual  server.  The  difference  between  vitual 
server  and  DMZ  is  that  DMZ  opens  all  ports  to  WAN  while  virtual  server  opens  ports 
according to the demand of the enabled services. To configure DMZ host:
1.  Click Advanced 	Setup 	-> 	NAT 	-> 	DMZ 	Host  in  the  left  side  menu  to  open  the 
configuration page. 
2.   Enter the IP address of the host to be...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
35

2.  Define a Filter 	Name for the filter rule. Specify protocol, source IP address, subnet 
mask and port (range) and destination IP address, subnet mask and port (range).
3.   Press Save/Apply to save and activate the settings. 
Firewall- Incoming IP filter
By default, all incoming IP traffic is blocked. You can allow certain types of IP traffic by 
setting up filter rules at DSL-N13.
1.  Click Advanced 	Setup 	-> 	Security 	-> 	IP 	Filtering 	->...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
36

Access	time	restriction
This  function  enables  to  put  time  restriction  on  Internet  access  by  setting  up  blocking 
time table. To configure the access time restriction:
1.  Click Advanced 	Setup 	-> 	Security 	-> 	Parental 	Control 	in  the  left  side  menu  to 
open the configuration page. Click Add to create a new rule.
2.  Fill in the User name to whom you want to apply the restriction.
3.  Fill in the MAC address of the restricted...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
37

This chapter shows how to configure other advanced router features of DSL-N13.
WAN
Click Advanced Setup -> WAN in the left side menu to enter the WAN setup page. This 
page allows you to edit the WAN settings.
LAN
1.  Click Advanced 	Setup 	-> 	LAN in the left side menu to enter the Local 	Area 	Network 	
(LAN) Setup page. This page allows to change the IP address and subnet mask of 
the router, enables or disables UPnP, IGMP snooping and DHCP...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
38

Setting	up	DNS	server
Domain  Name  System  (DNS)  server  is  used  to  translate  IP  addresses  into  easy-to-
remember domain names, such as www.asus.com, and vice versa. 
Click Advanced 	Setup 	-> 	DNS 	-> 	DNS 	Server  to  open  the  DNS  server  configuration 
page. By default, the DNS server is set to automatically accept the DNS server assigned 
by ISP. If your ISP specifies certain DNS server addresses, uncheck Enable 	Automatic...