Asus Router DSL-N13 User Manual Czech Version

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
1

Connecting	DSL-N13	with	 ASUS	WLAN	Card
Configuring ASUS WLAN Card with One Touch Wizard™
If  you  have  installed  ASUS  wireless  card  together  with  its  utilities  and  drives  on  your 
PC, click Start	-> 	Programes 	-> 	ASUS 	Utility-> 	WLAN 	Card 	-> 	One 	Touch 	Wizard to 
launch the One Touch Wizard utility.
3.  Set the authentication and encryption of your WLAN card the same with those at DSL-N13. Click Next to continue.
1. Select...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
20

2.  Input  the  key  you  have  set  on  the 
DSL-N13  and  click Connect.  The 
connection is complete within several 
seconds.
1.  Double-click  the  wireless  network 
icon on the task bar to view available 
networks. Select your wireless router 
and click Connect.
5.  Setup the IP address of the WLAN Card according to your network condition. After the setup is complete, click Finish	to exit the	One	Touch	Wizard.
Configuring WLAN card with...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
21

Wireless	settings
This chaper describes how to configure other wireless features of your ASUS DSL-N13 
ADSL Wireless Router.
Setting	up	SSID
SSID  stands  for  Service  Set  Identifier,  also  known  as  the  name  of  a  wireless  network. 
To connect a wireless router, or to form a wireless bridge system, all wireless routers or    
APs or clients must have the same SSID.To setup SSID:
1.  Click Wireless 	-> 	Basic in the left side menu to open...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
22

WPA:     WPA  stands  for  WiFi-Protected  Access.  WPA  provides  two  security 
modes  for  Home/SOHO  user  and  enterprise  network.  The  former 
solution adopts Pre-Shared Key for authentication, and the later uses the 
existing 802.1X RADIUS server in the enterprise network to process the 
authentication requests.
WPA	- 	PSK:   WPA-PSK  (Pre-Shared  Key)  is  the  solution  for  home  and  SOHO  users 
who  have  no  802.11X  authentication...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
23

3.  Select Enable in the WEP 	Encryption field to use WEP keys for data encryptions. 
Select  64-bit  or  128-bit Encryption 	Strength  for  key  length  then  click Set 	
Encryptioin 	Keys  button  to  setup  the  keys.  If  you  do  not  want  to  encrypt  data, 
select Disable in WEP 	Encryption and skip to Step 5.
4.   After  you  click  the Set 	Encryptioin 	Keys  button,  you  are  directed  to  another 
page  to  setup  the  keys.  You  can...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
24

802.1X
1.  Click Wireless 	-> 	Security in the left side menu to open the configuration page.
2.   Select 802.1X  in  the Network 	Authentication  field  to  enable  authentication  using 
RADIUS server in your network.
3.   Input the RADIUS 	Server 	IP 	address, RADIUS 	port (the default value is 1812), and 
RADIUS 	Key.
4.   You  can  choose  to  enable  or  disable  data  encryption.  If  you  want  to  encrypt  data, 
select Enable 	in  the WEP...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
25

3.  Set the WPA2 	Preauthentication to Enabled if you want to use this function. 
4.   The Network 	Re-auth 	Interval  is  36000  seconds  by  default,  you  can  setup  this 
value according to your network environment.
5.   Set  up  RADIUS  server  inforamtion  by  inputting  WPA  Group  Rekey  Interval, 
RADIUS server IP address, RADIUS port and RADIUS Key.
6.  Set up WPA encryption methods. If there are only WPA2 clients within your network,...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
26

MAC filter
You can setup MAC filters to allow or deny wireless clients with known MAC addresses. 
To setup MAC filter:
1.  Click Wireless 	-> 	MAC 	Filter in the left side menu to open the configuration page. 
2.   Select  the  restriction  mode  for  the  filter:  select Allow  to  allow  the  client  and  deny 
the rest; select Deny to deny the client and allow the rest. By default, the filter is set 
to Disable which allows all clients. Click...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
27

WDS setup (DSL-N13)
1.  Setting up encryption
If  you  want  to  use  encryption  function,  select  a Network 	Authentication  mode;  if  not, 
select Disabled. Click Wireless 	-> 	Security to open the configuration page.
In this example, set authentication to Open and encryption to Enabled, select 128bit for 
Encryption Strength, then click Set 	Encryption 	Keys.  

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
28

2.  Setting up channel
Click Wireless 	-> 	Advanced. Set Channel 	to 11 and click Save/Apply.
You can check Enable	ASUS 	PassPhrase and input a string in Passphrase field to let 
the system generate the Network Keys. You can also disable Passphrase and input four 
keys manually. When finished, click	Save/Apply.