Asus Mm17tg Users Manual

 
10
OSD MENU TABLE
 
The table describes the function of each OSD icon  Main Menu Item  Main 
Menu  Icon   Sub 
Menu  Item  Sub 
Menu  Icon   Description 
Scenery 
Mode    Advance for scenery use with 
SPLENDID
 Video Enhancement   
Standard 
Mode    Advance for general Windows use 
(SPLENDID
 Off)  Theater 
Mode    Advance for movie use with 
SPLENDID
 Video Enhancement   
Game 
Mode    Advance for game use with 
SPLENDID
 Video Enhancement   Scenario 
   
Night 
Mode    Advance for dark-display use...

 
11
OSD V-
Position  
  Adjust vertical position of the OSD   
OSD 
Timeout  
  Adjust OSD timeout 
Phase 
  Adjust image 
Phase to reduce 
Horizontal-line 
noise of the 
image Focus  
 
Clock 
  Adjust image 
Clock to reduce 
Vertical-line 
noise of the 
image 
H-Position  
  Adjust  horizontal 
position of the 
image Image 
Position  
 
V-Position  
  Adjust vertical 
position of the 
image Image Setup    
Auto 
  Automatically adjust the horizontal 
/vertical positions, phase and clock 
of the image...

 
12
PLUG AND PLAY 
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC 
STANDARD. It allows the monitor to inform the host system of its identity and, depending on 
the level of DDC used, communicate additional information about its disp\
lay capabilities. 
The DDC2B is a bidirectional data channel based on the I
$C protocol. The host can request 
EDID information over the DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE...

 
13
TROUBLESHOOTING (FAQ) 
 
Problem & Question Possible Solution  Power LED is not ON 
l Press the Power Button to check if the 
monitor is in the ON mode. 
l  Check if the Power Cord is properly 
connected the monitor and the power 
outlet.  The Power LED lights 
amber and there is no 
screen image 
l 
Check if the monitor and the computer are 
in the ON mode. 
l  Make sure the Signal Cable is properly 
connected the monitor and the computer. 
l  Inspect the Signal Cable and make sure 
none of the...

 
14
ERROR  MESSAGE & POSSIBLE  SOLUTION
 
 
NO SIGNAL   
 
1. Check that the signal-cable is properly connected , If the connector is loose,  tighten the  connector  s screws. 
2. Check the signal-cable  s connection pins for damage. 
 
 
 
OUT OF RANGE   
 
Your computer has been set to unsuitable display mode ,set the computer to display mode  given in the following Preset Timing Table.    

 
15
APPENDIX 
 
 
 
SPECIFICATIONS 
 
Model MM17T MM17D  Visible Diagonals 
17.0 (43.2cm) Screen Size 
Horizontal : 337.92mm, Vertical : 270.34mm  
Max. Resolution 
SXGA 1280x1024@75Hz Pixel Pitch 
0.264mm Brightness 
300cd/
  (Typ.), 400cd/   (Max.)  Contrast Ratio 
500:1 (Typ.), 600:1 (Max.) Viewing Angle (CR
 10)  
150
%(H)/ 130 %(V)  Display Colors 
16.2M Response Time 
8ms Signal Frequency 
Horizontal: 30~80 kHz, Vertical: 55 ~ 75Hz Max. Pixel Clock 
135MHz Plug & Play 
VESA DDC2BTM
  
  Video...

 
16
PRESET TIMING TABLE
 
 
STANDARD    
RESOLUTION   HORIZONTAL 
FREQUENCY  VERTICAL 
FREQUENCY  Dos-mode 
640 & 350 31.47kHz 70Hz  Dos-mode 
720 & 400  31.47kHz 70Hz  640 
& 480 31.47kHz 60Hz  640 
& 480 35.00kHz 66.6Hz  640 
& 480 37.50kHz 75Hz  VGA 
640 & 480 37.86kHz 72Hz  800 
& 600 37.879kHz 60Hz  800 
& 600 46.875kHz 75Hz  800 
& 600 35.16kHz 56Hz  800 
& 600 48.01kHz 72Hz  SVGA 
832 & 624 49.725kHz 75Hz  1024 
& 768 48.363kHz 60Hz  1024 
& 768 56.476kHz 70Hz  XGA 
1024 & 768 60.02kHz 75Hz  1280...

 
17
CONNECTOR PIN ASSIGNMENT
 
  15
6
10
1115
 
 
15 - Pin Color Display Signal Cable 
 
PIN NO.     
DESCRIPTION   
PIN NO.   
DESCRIPTION  1. Red   9. +5V 
2. Green 10. Detect Cable 
3. Blue 11. RXD 
4. TXD 12. DDC-Serial Data 
5. Ground 13. H-Sync 
6. R-Ground 14. V-Sync 
7. G-Ground 15. DDC-Serial Clock 
8. B-Ground   
 
 
   
24 - Pin Color Display Signal Cable(MM17T only) 
 
PIN NO.     
DESCRIPTION   
PI N NO.    
DESCRIPTION  1. TMDS Data 2- 13. TMDS Data 3+ 
2. TMDS Data 2+ 14. +5V Power 
3....