Asus Mm17tg Users Manual

							  TABLE OF CONTENTS
 
 
IMPORTANT INFORMATION --------------------------------------------------\
-------   1  PRECAUTIONS ------------------------------------------------------------\
----------  2 
SPECIAL NOTES ----------------------------------------------------------\
----------  3 
TAKE CARE OF THE MONITOR -----------------------------------------------\
-  3  
BEFORE YOU OPERATE THE MONITOR ---------------------------------------- \
 4  FEATURES ---------------------------------------------------------------\
-------------  4 
PACKING LIST -----------------------------------------------------------\
------------  4 
INSTALLATION INSTRUCTIONS  ---------------------------------------------\
-  5 
ADJUSTING THE VIEWING ANGLE ------------------------------------------- \
 7 
 
OPERATING INSTRUCTIONS -------------------------------------------------\
------   8  GENERAL INSTRUCTIONS ---------------------------------------------------\
---  8 
HOW TO RECONFIGURE ---- ------------------------------------------------\
--  9 
OSD MENU TABLE ---------------------------------------------------------\
-------  10 
PLUG AND PLAY ----------------------------------------------------------\
---------  12  
 
TROUBLESHOOTING (FAQ) ------------------------------------------------\
---------  13  ERROR  MESSAGE & POSSIBLE  SOLUTION ----------------------------  14 
 
APPENDIX ---------------------------------------------------------------\
------------------- 15  SPECIFICATIONS ---------------------------------------------------------\
---------- 15 
PRESET TIMING TABLE ----------------------------------------------------\
------ 16 
CONNECTOR PIN ASSIGNMENT ---------------------------------------------- \
17  
 
 
 
 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
   
 
  
						

							 
1IMPORTANT INFORMATION
  
Before operating the monitor, please read this User Guide thoroughly. This User Guide 
should be retained for future reference. 
 
 
FCC Class B Radio Frequency Interference Statement  
WARNING: (FOR FCC CERTIFIED MODELS) 
 
NOTE: 
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy, and if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
1. Reorient or relocate the receiving antenna. 
2. Increase the separation between the equipment and receiver. 
3. Connect the equipment into an outlet on a circuit different from that to which the receiver  is connected. 
4. Consult the dealer or an experienced radio/TV technician for help. 
 
 
NOTICE: 
 
1. The changes or modifications not expressly approved by the party responsible for  compliance could void the users authority to operate the equipment. 
2. Shielded interface cables and AC power cord, if any, must be used in order to comply  with the emission limits. 
3. The manufacturer is not responsible for any radio or TV interference caused by  unauthorized modification to this equipment. It is the  responsibilities of the user to 
correct such interference. 
 
 
 
As an  ENERGY  STAR â
 
Partner our company has determined that this product meets the 
E NERGY  STAR â
 guidelines for energy efficiency. 
 
 
WARNING: 
 
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerous 
high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to 
qualified personnel only. 
  
						

							 
2PRECAUTIONS
 
 
l  Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry 
tub, swimming pool or in a wet basement. 
l  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can 
injure a person and cause serious damage to the appliance. Use only a cart or stand 
recommended by the manufacturer or sold with the monitor. If you mount the monitor on a 
wall or shelf, use a mounting kit approved by the manufacturer and follow the kit 
instructions. 
l  Slots and openings in the back and bottom of the cabinet are provided for ventilation. To 
ensure reliable operation of the monitor and to protect it from overheating, be sure these 
openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or 
similar surface. Do not place the monitor near or over a radiator or heat register. Do not 
place the monitor in a bookcase or cabinet unless proper ventilation is \
provided. 
l  The monitor should be operated only from the type of power source indicated on the label. 
If you are not sure of the type of power supplied to your home, consult your dealer or local 
power company. 
l  The monitor is equipped with a three-pronged grounded plug, a plug with a third 
(grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If 
your outlet does not accommodate the three-wire plug, have an electrician install the 
correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety 
purpose of the grounded plug. 
l  Unplug the unit during a lightening storm or when it will not be used fo\
r long period of time. 
This will protect the monitor from damage due to power surges. 
l  Do not overload power strips and extension cords. Overloading can result in fire or electric 
shock. 
l  Never push any object into the slot on the monitor cabinet. It may short circuit parts 
causing a fire or electric shock. Never spill liquids on the monitor. 
l  Do not attempt to service the monitor by yourself; opening or removing covers can expose 
you to dangerous voltages and other hazards. Please refer all servicing to qualified 
service personnel. 
l  To ensure satisfactory operation, use the monitor only with UL listed computers which 
have appropriate configured receptacles marked between 100 - 240V AC, Mi\
n. 5A. 
l  The wall socket shall be installed near the equipment and shall be easil\
y accessible. 
 
  
						

							 
3
SPECIAL NOTES 
 
The following symptoms are normal with the monitor and do not indicate a\
 problem. 
 
 
·
 Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off 
the Power Switch and then turn it on again to make sure the flicker disa\
ppears. 
·  You may find slightly uneven brightness on the screen depending on the desktop pattern 
you use. 
·  The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 
0.01% or less such as a missing pixel or a pixel lit all the time. 
·  Due to the nature of the LCD screen, an afterimage of the previous screen may remain 
after switching the image, when the same image is displayed for hours. In this case, the 
screen is recovered slowly by changing the image or turning off the Power Switch for 
hours. 
·  When the screen becomes black or flashing, or cannot illuminate any more, contact your 
dealer or service center to replace parts. Don  t repair the screen by yourself! 
 
 
TAKE CARE OF THE MONITOR  
 
 
·  Do not install the monitor in a location near heat sources such as radiators or air ducts, or 
in a place subject to direct sunlight, or excessive dust or mechanical v\
ibration or shock. 
·  Save the original shipping carton and packing materials, as they will come in handy if you 
ever have to ship your monitor. 
·  For maximum protection, repackage your monitor as it is originally packe\
d in the factory. 
·  To maintain cleanness of your LCD display, wipe it periodically with clean and soft cloth. 
The screen may be damaged by any liquid splash. 
·  To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains 
may be removed with a cloth lightly dampened with mild detergent solution. Never use 
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage 
the cabinet. As a safety precaution, always unplug the monitor before cl\
eaning it. 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							 
4
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
·
 43.2cm(17 !) TFT Color LCD Monitor. 
·  Recommended Resolutions: SXGA 1280 X 1024 @60Hz. 
·  8ms (Tr+Tf) Quick Response Time. 
·  SPLENDID  Video Enhancement Technology. 
·  5 Video Preset Modes Switiched by Hotkey 
·  3 Skin-Tones Selection for Users   Preference. 
·  Microsoft Windows 95/98/2000/XP Compliance 
·  VESA Display Data Channel (DDC)1/2B Compliance 
·  VESA Wall Mount Compliance (100x100mm). 
·  EPA ENERGY STAR #
 
 and Ergonomic Design. 
·  Cabel Binder and Compact Case Design for Space Saving. 
·  Both VGA and DVI-D Inputs. (for MM17T only) 
·  1.2Wx2 Stereo Speakers / Earphone Jack. (for MM17T only) 
 
 
PACKAGE LIST   
    
The product package should include the following items: 
 
1. LCD Monitor 
2. Quick Start Guide 
3. User Guide (CD) 
4. Power Cord 
5. VGA Cable 
6. Audio Cable (for MM17T only) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							 
5
INSTALLATION INSTRUCTIONS
 
 
ASSEMBLING THE MONITOR BASE  
    Install                         Remove  
   
 
Figure 1  
 
 
POWER CORD / POWER SOURCE 
 
 
1. Make sure that the power cord is the correct type required in your area.\
 
2. This LCD monitor has an internal universal power supply that allows operation in either  100/120V AC or 220/240V AC voltage area (No user adjustment is required\
.) 
3. Connect the power cord into your LCD monitor  s power input socket, and then plug the 
other end into a 3-pin AC power outlet. The power cord may be connected to either a wall 
power outlet or the power outlet socket on your PC, depending on the type of power cord 
supplied with your LCD monitor. 
 
NOTES 
 
A certified power supply cord has to be used with this equipment. The relevant national 
installation and/or equipment regulations shall be considered. A certified power supply cord 
not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation 
H05VV-F 3G 0.75mm 2
 or H05VVH2-F2 3G 0.75mm 2
) shall be used. Alternative a flexible cord 
be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm 2
) shall be 
used. 
 
    
						

							 
6
MAKING THE CONNECTIONS
 
 
Connecting the Signal Cable:  Plug one end of the VGA Cableto the LCD monitor  s VGA 
port, the other end to the computers VGA socket and tighten the two screws on the cable 
connector. Moreover, for MM17T, you can buy an extra 24-Pin DVI-D cable from your dealer 
for the digital signal connection if preferred. 
 
Connecting the Power Cord:  Plug one end of the AC-power cord to the LCD monitor  s AC 
input socket, the other end to the power outlet. 
 
Connecting the Audio Cable (MM17T only):  Plug the audio cable between the computer 
multi-media (or audio) cards audio output  and  monitors audio jack.  
 
Caution:  If the AC outlet is not grounded (with three holes), install the proper grounding 
adapter (not supplied).   
 
 
            
 
Figure 2 
   
1.   AC Input Socket 2.   Audio Jack (MM17T only) 
3.   DVI-D Port (MM17T only) 4.   VGA (D-SUB) Port 
5.   Earphone Jack (MM17T only)   6.   Cable Binder  
						

							 
7
ADJUSTING THE VIEWING ANGLE  
 
·
 For optimal viewing it is recommended to look at the full face of the monitor, then adjust 
the monitor  s angle to your own preference. 
·  Hold the stand so you do not topple the monitor when you change the moni\
tor  s angle. 
·  You are able to adjust the monitor  s angle from -5 ° to 20 °. 
   
 
Figure 3   
 
NOTES 
 
 
 
·  Do not touch the LCD screen when you change the angle. It may cause damage or break 
the LCD screen. 
·  Careful attention is required not to catch your fingers or hands when you change the angle. 
  
						

							 
8
OPERATING INSTRUCTIONS 
 
 
GENERAL INSTRUCTIONS 
 
 
Press the power button to turn the LCD monitor on or off. The other control buttons are 
located on the front bezel (See Figure 4). By changing these settings, the picture can be 
adjusted to your personal preferences. 
·
 The power cord should be connected. 
·  Connect the signal cable from the LCD monitor to your computer. 
·  Press the power button to turn on the LCD monitor. The power indicator w\
ill light up. 
 
 
         
 
 
                     Figure 4  
 
 
1. SPLENDID  Button : 
·  Hotkey for switching between
 5 advanced video preset modes (Scenery Mode, 
Standard Mode, Theater Mode, Game Mode, Night Mode) with SPLENDID  Video 
Enhancement Technology. 
·  
Automatically adjust the image to its optimized position, clock, and phase by pressing 
the button for 2 seconds. 
·   
Exit the OSD menu or go back to the previous menu as the OSD menu is act\
ive. 
 
2.   /   
 Button : 
·  
Activate  Volume (MM17T)/  Contrast (MM17D) adjustment menu. 
·  
Decrease the level of the function selected or move to the previous function as the 
OSD menu is activated. 
 
3.  Power Button / Power LED Indicator:  
·  
Switch the LCD monitor on or off. 
·  LED lights blue(MM17T)/green(MM17D): normal operation mode. 
·  LED lights amber: power saving mode. 
·  LED is off: power off mode.
 
 
4.  !/   Button :  
						

							 
9
·
 
Activate  Brightness  adjustment menu. 
·  
Increase the level of the function selected or move to the next function as the OSD 
menu is activated. 
 
5. Menu Button :  
· 
Activate the OSD (On-Screen Display) main menu. 
·  
Enter/select the icon(function) highlighted as the OSD menu is activat\
ed.  
 
 
HOW TO RECONFIGURE  
  1. Press the MENU-button to activate the OSD main menu (Figure 5).  
 
2. Press    
or   
to navigate through the functions. Once the desired function is highligh\
ted, 
press the MENU-button  to activate it.  If the function selected has a s\
ub-menu, press   
or   
again to navigate through the sub-menu functions.  Once the desired func\
tion is 
highlighted, press MENU-button to activate it.  
  3. Press   
or    
to change the settings of the selected function.  
   
4. To exit and save, select the exit function. If you want to adjust any ot\
her function, repeat  steps 2-3.  
 
   
 
Figure 5