Asus Led Projector P2 Series Manual

							
LED projector E-Manual1

5. Adjust the image focus.
Move the focus ring to the left or to the right to adjust the image 
focus. 
NOTE: Use a still image when adjusting the onscreen display.
AV-IN
H D M I / M H L 
						

							
LED projector E-Manual 
						

							
LED projector E-Manual

Chapter 3:
Using the onscreen 
display menu
Chapter 3: Using the onscreen 
display menu 
						

							
4LED projector E-Manual

Launching programs from the 
onscreen display menu
NOTE: The following screenshots are for reference only and may be 
updated without prior notice. Screenshots may also vary depending 
on the LED projector model.
The onscreen display menu contains a set of programs and settings 
designed to maximize your use of the LED projector. You can 
navigate inside the onscreen display menu using the control panel 
buttons on your LED projector or its accompanying remote control. 
To launch options or programs shown on the onscreen display 
menu, refer to the control panel grid shown as below.
control panel grid 
						

							
LED projector E-Manual5

Control panel grid
The control panel grid guides you through the process of using the 
control panel buttons to launch active options inside your onscreen 
display menu.
The control panel grid represents the 8 buttons surrounding the 
VGAHDMI
button on the control panel. 
control panel grid samplecontrol panel buttons 
						

							
6LED projector E-Manual

Using your LED projector for the first 
time
Refer to the following steps when using your LED projector for the 
first time. 
1. Set up your LED projector then press the power button. The 
ASUS welcome screen appears to indicate that the LED projector 
is now turned on.
2. Using the control panel buttons, select the language you want 
to use in your LED projector.
3. In the Demo Mode control panel grid, select either of the 
following options:
 On - This option launches the demo video of your LED projector.  
If you choose this, proceed to step 4. 
IMPORTANT!
•  This option automatically launches the Demo Mode control panel 
grid whenever you turn on your LED projector.
•  When this option is enabled, your LED projector automatically 
launches the demo video.
NOTE: To know more about the functions of Demo Mode, refer to the 
Using Demo Mode section in this manual.   
						

							
LED projector E-Manual7

 Off -  This option disables viewing demo videos on your LED 
projector and proceeds to scan for connected input devices.
IMPORTANT! This option deactivates the Demo Mode control panel 
grid and instead launches the Input control panel grid whenever you 
turn on your LED projector.
NOTE: To know more about the functions of Demo Mode, refer to the 
Using Demo Mode section in this manual. 
4. After watching the demo video or while watching the demo 
video, you can press VGAHDMI to proceed to scanning for 
connected input devices. 
						

							
8LED projector E-Manual

Accessing your LED projector’s 
settings
Aside from using the control panel buttons to navigate the onscreen 
display menu, you can also use each of these buttons to launch the 
following LED projector settings:
IMPORTANT! Press Projector Setting on the control panel grid to 
use these functions in the Media Center.
VGAHDMI Power
Press this button to turn the LED projector on or off.VGAHDMI
 Brightness
Press this button to adjust the brightness of your projection 
onscreen.
VGAHDMI
 Keystone
Press this button to correct distorted images resulting from an 
angled projection.
VGAHDMI
 Main Menu/OK
Press this button to launch the main menu of your LED projector 
settings, to activate a selected item, or exit the current control panel 
grid.
VGAHDMI
 Volume
Press this button to adjust the volume of the audio file played on 
your LED projector. 
						

							
LED projector E-Manual9

VGAHDMI

 Contrast
Press this button to set the difference between lighten or darken 
your projection onscreen.
VGAHDMI Media Center*
Press this button to launch the Media Center.
NOTE: For more details, refer to the Using the Media Center section in 
this manual.
VGAHDMI VGA*
Press this button to start the connection with your input device via 
the mini VGA port.
VGAHDMI HDMI*
Press this button to start the connection with your input device via 
the HDMI port.
* on selected models only 
						

							
40LED projector E-Manual

VGAHDMI
 Input*
Press this button to scan the connected devices to your LED 
projector.
* on selected models only