Asus Led Projector P2 Series Manual

							
LED projector E-Manual11

Control panel buttons
The control panel buttons allow you to navigate the onscreen 
display menu. Individually, these buttons also correspond to a 
specific LED projector setting as indicated below.
VGAHDMI*VGAHDMI*VGAHDMI
Media CenterInputPowerVGAHDMIVGAHDMIVGAHDMI
Image PositionBrightnessImage Setting
VGAHDMIVGAHDMIVGAHDMI
KeystoneMain menu/OKVolume
VGAHDMIVGAHDMIVGAHDMI
SplendidContrast Setup
VGAHDMI*VGAHDMI*
VGAHDMI
NOTE: For more information on using the control panel buttons 
to access your LED projector’s settings, refer to the Accessing 
your LED projector’s settings section in this manual.
* on selected models only 
						

							
1LED projector E-Manual

Front view
H D M I / M H L
9
12

Lens
The lens projects video or image files onscreen from your input 
device.
WARNING! Do not touch the lens using your hands or any sharp 
object.
Air vents
The air vents allow cool air to enter and warm air to exit the LED 
projector.
WARNING! Ensure that paper, books, clothing, cables, or other 
objects do not block any of the air vents or else overheating 
may occur. 
						

							
LED projector E-Manual1

Infrared (IR) sensor
The IR sensor detects signal from your LED projector’s remote 
control, allowing you to access the LED projector’s control 
panel from a distance of up to ten (10) meters and a receiving 
angle of 15°.
Rear view
P2B/P2M 
H D M I / M H L
9
12

H D M I / M H L
P2E 
						

							
14LED projector E-Manual

Power (DC) input port
Insert the bundled power adapter into this port to charge the 
battery pack and supply power to your LED projector.
WARNING! The adapter may become warm to hot while in 
use.  Do not cover the adapter and keep it away from your body 
while it is connected to a power source.
Micro SD card reader
This built-in memory card reader supports microSD and 
microSDHC card formats.
USB 2.0 port
The USB 2.0 (Universal Serial Bus 2.0) port is compatible with 
USB 2.0 or USB 1.1 devices. 
Micro USB 2.0 port*
This port also allows you to transfer data from your input device 
to your LED projector.
Audio output jack port
The audio output jack port allows you to connect your LED 
projector to amplified speakers or headphones.
Mini VGA port
The mini VGA port allows you to connect your LED projector to 
a standard VGA-compatible device.
Manual reset hole*
Insert a straightened paperclip in this hole to restore your LED 
projector to its default settings.
*on selected models only 
						

							
LED projector E-Manual15

HDMI/MHL port
This port is for the HDMI (High-Definition Multimedia Interface) 
connector and also supports MHL (Mobile HI-Definition Link) 
compatible devices. This port is HDCP compliant for HD DVD, 
Blu-ray, and other protected content playback.
Air vents
The air vents allow cool air to enter and warm air to exit the LED 
projector.
WARNING! Ensure that paper, books, clothing, cables, or other 
objects do not block any of the air vents or else overheating 
may occur.
*on selected models only 
						

							
16LED projector E-Manual

H D M I / M H L

9
12


Air vents
The air vents allow cool air to enter and warm air to exit the 
LED projector.
WARNING! Ensure that paper, books, clothing, cables, or other 
objects do not block any of the air vents or else overheating 
may occur.
Kensington® security slot
The Kensington® security slot allows you to secure your LED 
projector using Kensington® compatible LED projector security 
products.
Left side 
						

							
LED projector E-Manual17

Right side
H D M I / M H L
9
12

Air vents
The air vents allow cool air to enter and warm air to exit the 
LED projector.
WARNING! Ensure that paper, books, clothing, cables, or other 
objects do not block any of the air vents or else overheating 
may occur. 
						

							
18LED projector E-Manual

Bottom view
Built-in stand
This LED projector comes with a built-in stand that allows you 
to adjust the height of the projector by either 9° or 12°.
Tripod socket
Connect the LED projector to a tripod using this socket. 
						

							
LED projector E-Manual19

LED projector remote control
NOTE: Actual appearance may vary depending on model.
Control panel buttons
The control panel buttons allow you to navigate the onscreen 
display menu. Individually, these buttons also correspond to a 
specific LED projector setting.
NOTE: For more details on using the control panel buttons, refer 
to the Using the onscreen display menu section in this manual. 
						

							
0LED projector E-Manual

Remote control buttons
These additional buttons allow you to use the LED projector 
from a distance of up to 10 meters. 
 Back - Press this button to go back to the previous screen.
 Home - Press this button to go back to the home screen.
 Laser pointer - Press this button to activate the laser 
pointer of the remote control.
 Rewind - Press this button to rewind your audio or video 
file.
  Play/Pause - Press this button to play or stop your audio or 
video file.
 Fast-forward - Press this button to fast-forward your audio 
or video file.
Battery compartment
The battery compartment allows you to use a CR2025 or 
CR2032 lithium coin battery to power your LED projector’s 
remote control.
NOTE: For more details on using the battery compartment, refer 
to the Replacing the battery section in this manual.