Asus Led Projector P2 Series Manual

							
LED projector E-Manual1

Replacing the battery
A. Move the battery compartment’s latch to the right to unlock the 
battery holder.
B.  Pull down the battery holder and remove it completely out of 
the battery compartment. 
						

							
LED projector E-Manual

C. Remove the old battery then insert the new lithium coin battery 
into the battery holder with the positive side (+) facing up. 
D.  Slide the battery holder back into the battery compartment. 
Push it all the way in until you hear a soft click, indicating that 
the battery compartment is locked back in place. 
						

							
LED projector E-Manual

Chapter 2:
Setting up 
Chapter 2: Setting up 
H D M I / M H L 
						

							
4LED projector E-Manual

Operating your LED projector
This portable LED projector allows you to plug and play your devices 
so you can easily open multimedia files.
For your safety and to maintain the quality of this unit, refer to the 
following steps when operating your LED projector.
1. Connect the LED projector to the power adapter.
A. Connect the AC/DC power cord to the power adapter.
B. Connect the AC power cord to a power source.
C. Connect the DC power connector to your LED projector.
NOTE: This LED projector is also compatible with ASUS power 
adapters within the 65W to 90W range. 
H D M I / M H L 
						

							
LED projector E-Manual5

WARNING!
 Read the following precautions for your LED projector’s battery 
pack.
• Only ASUS-authorized technicians should remove the battery 
inside the device.
• The battery used in this device may present a risk of fire or 
chemical burn if removed or disassembled.
• Follow the warning labels for your personal safety.
• Risk of explosion if battery is replaced by an incorrect type.
• Do not dispose of in fire.
• Never attempt to short-circuit your LED projector’s battery.
• Never attempt to dissamble and reassemble the battery.
• Discontinue usage if leakage is found.
• The battery and its components must be recycled or disposed of 
properly.
• Keep the battery and other small components away from children.  
						

							
6LED projector E-Manual

AC power cord requirements
Use the correct AC plug type according to your current location.
IMPORTANT! Contact your sales dealer if the AC power cord bundled 
with your LED projector does not match your local power source.
NOTE: We highly recommend that you use a video source device that 
also uses a grounding type plug to prevent signal interference due to 
voltage fluctuations.
for Australia and Mainland Chinafor U.S.A., Canada, and Taiwan
for Continental Europefor U.K.
for Japanfor Sweden 
						

							
LED projector E-Manual7

2. Connect the LED projector to your device.
H D M I / M H L
 Micro SD card
 Micro USB
 Audio output jack 
 Mini VGA
 HDMI/MHL
 USB 2.0
H D M I / M H L
H D M I / M H L
H D M I / M H L
H D M I / M H L
H D M I / M H L
H D M I / M H L 
						

							
8LED projector E-Manual

3. Adjust the height of the LED projector.
Your LED projector comes with a built-in stand that helps adjust the 
image height onscreen.
WARNING! 
• Possibly hazardous optical radiation emitted from this product. 
Do not stare at operating lamp. May be harmful to the eyes.
• Ensure that the built-in stand is fully retracted before placing the 
LED projector inside the projector bag. 
NOTES:
• Place the LED projector on a stable flat surface.
• Keep a space of 30 cm or more between the sides of the LED 
projector. 
• Consult your dealer for special installation procedures like 
suspending the LED projector from the ceiling.
9
12
 
						

							
LED projector E-Manual9

Screen size and projection distance table
Adjust the LED projector’s distance from the screen using the table 
below.
projection distance
LED projector
screen size
Screen size  - 16:10Projection distance
(inches)(millimeters)(meters)
307620.71
4010160.95
6015241.42
8020321.90
10025402.37
12030482.84
14035563.32
16040643.79 
						

							
0LED projector E-Manual

4. Press the power button.
NOTE: For safety reasons, some models require you to press the 
power button for about 2 seconds to turn on your LED projector. 
H D M I / M H L