Asus Led Projector B1m Manual

							
LED projector E-Manual51

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

WiFi
This feature enables wireless connections to your LED projector 
from input devices equipped with Wi-Fi capabilities like laptops and 
mobile phones.
IMPORTANT! A Wi-Fi dongle is required to enable this feature. 
Inside WiFi
Display by AP mode
Using this mode, you can establish a one-to-one connection 
between your input device and your LED projector.
Display by Client mode
Using this mode, you can connect your LED projector to a 
another Wi-Fi hotspot to enable group access when using the 
LED projector.
WiFi AP setting
This allows you to change the SSID, Security, and Password 
settings when using your EZLINK WIFI's Display by AP mode.
WiFi Client setting
This scans the available WiFi hotspots that you can connect to 
your LED projector to enable the Display by Client mode. 
						

							
5LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

Installing the EZ Display app
You need to install the EZ Display app so you can project from your 
input device using WiFi. Download this application online using any 
of the following options: 
• If you are using an Android OS, download EZ Display from 
Google Play Store.
• If you are using an iOS, download EZ Display from iStore.
• If you are using a Windows OS, download the EZ display 
app from the link that appears after connecting to the Wi-Fi 
dongle.  
Using Display by AP mode
1.  Connect the Wi-Fi dongle to your LED projector to launch the 
Media Center.
NOTE: If the Media Center does not automatically launch, press  
then select EZLINK-WIFI>Display by AP mode.
2. Enable the WiFi connection in your input device. Select ASUS 
B1 (default SSID) or the new SSID you configured for the B1M 
LED projector.
3. Type the password on your input device as shown on the LED 
projector to enable the AP mode connection.
4. Open EZ Display on your input device. 
						

							
LED projector E-Manual5

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

6. Select Projector.
7. Tap the EZ Display feature you would like to use.
 EZ Remote - This feature allows you to use your mobile phone 
as a remote control for your LED projector. 
 Pix Viewer - This feature allows you to project photos from your 
input device.
 Web - This feature allows you to project browsing the internet 
from your input device.
 Live Cam - This feature enables you to project using the camera 
from your input device. 
						

							
5LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

Using Display by Client mode
1. Connect the Wi-Fi dongle to your LED projector to launch the 
Media Center.
NOTE: If the Media Center does not automatically launch, press  
then select EZLINK-WIFI
2. Select Display by Client mode.
3. Press  to scroll up or  to scroll down the list of available 
Wi-Fi hotspots then press  to select the Wi-Fi hotspot you 
would like to connect to. 
4. Press  to launch the onscreen display menu’s keyboard. 
Refer to the control panel grid when navigating the keyboard to 
input the Wi-Fi hotspot’s password.
5. Press OK to start the Wi-Fi connection between the Wi-Fi 
hotspot and your LED projector.
6. Repeat the same steps under Using Display by AP mode to 
connect input devices to the LED projector.  
						

							
LED projector E-Manual55

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

Appendices
Appendices
Appendices  
						

							
5LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

Federal Communications Commission Statement
This equipment has been tested and found to comply with the 
limits for a class B digital device, pursuant to Part 15 of the Federal 
Communications Commission (FCC) rules. These limits are designed 
to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of 
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than 
that which the receiver is connected to. 
• Consult the dealer or an experienced radio/TV technician for 
help.
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference that may cause 
undesired operation. 
						

							
LED projector E-Manual57

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

Canadian Department of Communications 
Statement
This digital apparatus does not exceed the Class B limits for 
radio noise emissions from digital apparatus set out in the 
Radio Interference Regulations of the Canadian Department of 
Communications.
This class B digital apparatus complies with Canadian ICES-003.
Global Environmental Regulation Compliance and 
Declaration 
ASUS follows the green design concept to design and manufacture 
our products, and makes sure that each stage of the product 
life cycle of ASUS product is in line with global environmental 
regulations. In addition, ASUS disclose the relevant information 
based on regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for 
information disclosure based on regulation requirements ASUS is 
complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS
Swiss Energy Laws
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment 
to the highest standards for protecting our environment. We believe 
in providing solutions for you to be able to responsibly recycle our 
products, batteries, other components as well as the packaging 
materials. Please go to http://csr.asus.com/english/Takeback.htm for 
detailed recycling information in different regions. 
						

							
58LED projector E-Manual
DRAFT 2   12/17/12
DRAFT 2   12/17/12